Mblake for Model Number Mtw5740tq0 Water just stopped flowing after initial burst. Tried several different cycles with same results. No water flow at all. Is the timer the issue?
Answer Hello Mblake. Check and make sure the hot and cold valve are both working. If so, then you will need to test the pressure switch W10339250 on the unit and see if it is bad. If it checks good, then new would be the timer. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, April 26, 2017