Customer Questions and Answers for Dryer Timer Control by Whirlpool

Hello Crystal. Check and make sure you have 240 volts coming to the dryer at the terminal block W11705611. If that is good and the element and thermal cut-offs are good, you will need to test and see if your loosing power at the motor or the timer. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html