Maytag Dryer Control Board

The Dryer Timer is an OEM replacement part for Whirlpool dryers. It is a critical component that controls the timing and sequence of the various drying cycles, ensuring the machine operates correctly and efficiently.

Causes of needing to replace the dryer timer can include general wear and tear over time, electrical malfunctions, damage from power surges or voltage fluctuations, or moisture or water exposure within the timer itself.

Symptoms of a bad dryer timer include:

• The dryer failing to advance through the complete cycle or getting stuck in one part of the cycle
• Cycles running for an incorrect duration (too short or too long)
• The dryer failing to heat, tumble, or stop at the appropriate times

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Timer is an OEM part for Whirlpool dryers. This timer is a control mechanism that allows you to set the drying time for various fabrics and load sizes. It works by regulating the duration of the drying cycle to ensure clothes are dried efficiently without overuse of energy or excessive wear on fabrics.  

Causes of a bad dryer timer can vary from electrical problems within the timer mechanism, such as short circuits or burnt contacts, to mechanical failures like stripped gears. 

Symptoms of a bad timer:

• The dryer not starting or failing to stop at the end of a cycle 
• Clothes remaining damp or overly dry 
• The dryer operating only at a specific setting 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Timer is an OEM part for Whirlpool dryers. This part manages the duration of drying cycles. This part allows users to select the desired time for drying clothes, ensuring that garments are dried efficiently and with care. The timer controls various cycles and settings, including timed dry, cool down, and air fluff, making it an essential part of the dryer's functionality. 

Causes of a bad timer include electrical failures within the timer mechanism, physical damage to the dial or internal components, or wear and tear from regular use.

Symptoms of a bad Dryer Timer include:

• The dryer not starting or stopping at the correct times
• Inability to advance through different drying cycles
• Clothes not drying properly or cycles running too long or too short

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Timer is an OEM part for Whirlpool dryers. It controls the drying cycles by regulating the duration and sequence of operations, ensuring that clothes are dried properly according to the selected settings.

Over time, the dryer timer can wear out due to regular use, electrical issues, or internal mechanical failures. A faulty timer can lead to cycles not starting or ending correctly, resulting in under-dried or over-dried clothes.

Symptoms of a bad Dryer Timer include:

• The dryer not advancing through cycles
• The timer not moving or stopping
• Inconsistent drying times or the dryer stopping mid-cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer Assembly is an OEM part for Whirlpool dryers. It is responsible for controlling and managing the timing and sequence of the various drying cycles and functions.

Causes of a bad timer assembly may include electrical malfunctions, mechanical wear and tear, or physical damage from impact or moisture.

Symptoms of a faulty Timer Assembly include:

• Dryer not advancing through cycles or stopping mid-cycle
• Incorrect cycle times or skipping of certain cycle phases
• Lights or displays indicating incorrect time remaining
• Failure to initiate or start drying cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM part for Whirlpool dryers. This part manages the drying cycle's duration, ensuring clothes are dried efficiently without overuse of energy. It allows users to select the desired cycle time based on the laundry's type and moisture level.  

Over time, timers can wear out or malfunction due to electrical issues or mechanical wear and tear. If your dryer isn't advancing through the drying cycle, stops mid-cycle, or fails to start, it might be time to replace the timer.

Symptoms of a bad Timer include:

• The dryer fails to start
• The drying cycle doesn't advance or stops mid-cycle
• Clothes are not dried in the time expected
• The timer knob doesn't move or is stuck

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Timer is an OEM replacement part for Whirlpool dryers. This timer controls the length of the drying cycle by regulating the electrical components of the dryer, such as the heating element and motor. It ensures that the appliance runs for the set amount of time and shuts off automatically at the end of the cycle.

Causes of a bad Dryer Timer can include wear and tear over time, electrical faults such as short circuits, or damage to internal gears or contacts. A malfunctioning timer can result in improper cycle timing or failure to start or stop the dryer.

Symptoms of a bad Dryer Timer include:

• The dryer not starting or stopping as expected
• Inability to switch between cycle settings
• The timer knob not advancing or getting stuck
• Inconsistent drying results due to premature shutoff or extended cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Timer is an OEM replacement part for Whirlpool dryers. It electronically controls the different stages of the drying cycle, from initial heat up to final cool down. The timer allows for programmed cycles and ensures clothes are dried thoroughly and efficiently.

Causes of a bad dryer timer include water intrusion leading to corrosion, physical abuse from impact or overloading, or standard wear and tear on integrated circuits over many cycles.

Symptoms of a bad dryer timer include:

• Inability to start or continue drying programs
• Premature ending of cycles
• Erratic stopping and starting of drum rotation
• No heat function during drying
• Fault codes and shutdowns

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers.

The Timer is an OEM replacement part for Whirlpool dryers. It accurately sequences drying functions during programmed cycles.

Symptoms of a faulty timer include:

• Inability to start or complete dry cycles  
• Drying not fully finishing within expected times
• Unexpected shutoff or prolonged run times 

Causes can be stripped internal gears or disconnected wiring terminals from extended operation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM part for Whirlpool dryers. This part manages the duration of the drying cycles by controlling the electrical components that power the dryer. The timer ensures that each cycle runs for the correct amount of time, enabling effective and efficient drying of clothes.

Causes of a bad Timer can include internal electrical malfunctions, wear from regular use, or damage resulting from power surges or electrical issues within the dryer.

Symptoms of a bad Timer include:

• The dryer not advancing through cycles
• The dryer running longer or shorter than expected
• The dryer not turning off at the end of the cycle
• Inconsistent drying times or cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Timer is an OEM component for Whirlpool electric dryers. It is the electronic component responsible for regulating preset drying cycles and automatic shutoff functions according to manufacturer specifications.

Causes of a faulty timer often involve general wear from years of extended use. Exposure to high internal temperatures within the dryer drum can degrade surface-mounted circuitry as well.

Symptoms of a problematic timer include:

• Inconsistent or incomplete cycles
• The washing machine not advancing to the next cycle
• The machine not starting at all

Compatible brands include Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore electric dryer models too. 

60Hz

This two-cycle dryer timer controls cycle selection, timing, and automatic shutoff. Replacing a worn or stuck timer restores reliable cycle advance so your dryer starts, runs, and stops when it should.

• Times and advances the two drying cycles using internal cams and electrical contacts
• Directs power to the drive motor and heating circuit during the selected cycle
• Moves the dial and stops the dryer at the OFF position
• Common symptoms include: cycle won't advance, dryer runs too long/doesn't shut off, only certain settings work, or the timer knob doesn't move on its own

• Disconnect power; if gas, shut off the gas supply before servicing
• Remove the control panel/back cover and pull off the timer knob/dial as needed
• Label or photograph wire positions; transfer wires to the new timer one at a time
• Reuse existing mounting screws and the original dial/knob; reinstall panels and test

The Timer is an OEM replacement part for Whirlpool dryers. This timer controls the length of the drying cycle by regulating the electrical components of the dryer, such as the heating element and motor. It ensures that the appliance runs for the set amount of time and shuts off automatically at the end of the cycle.

Causes of a bad Timer can include wear and tear over time, electrical faults such as short circuits, or damage to internal gears or contacts. A malfunctioning timer can result in improper cycle timing or failure to start or stop the dryer.

Symptoms of a bad Dryer Timer include:

• The dryer not starting or stopping as expected
• Inability to switch between cycle settings
• The timer knob not advancing or getting stuck
• Inconsistent drying results due to premature shutoff or extended cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dryer timer controls cycle length and sequencing, advancing the machine through the selected settings and turning it off at the end. Replacing a failed timer restores proper cycle timing, advancing, and dependable automatic shutoff.

• Controls cycle timing and the order of operations throughout the selected program
• Routes power to the motor and other circuits as the internal cam advances
• Advances through timed and automatic cycles to complete the load
• Common symptoms of a failed timer: cycle won't advance, dryer runs too long or won't shut off, won't start or only works on one setting, stops mid-cycle

• Disconnect power; for gas dryers, also turn off the gas supply
• Access the control console; remove the old timer from its mounting and note wire locations
• Photograph wiring and transfer leads to the same labeled terminals one at a time
• Reassemble the console, restore power, and test that all cycle positions advance and shut off properly

This is a mechanical defrost timer that controls the automatic defrost cycle of the refrigerator. It periodically shuts off the compressor and energizes the defrost heater so frost can melt, helping maintain proper cooling performance.

• Cycles the unit between cooling and defrost at set intervals
• Stuck or failed timers can cause warm temperatures, heavy frost, or continuous running
• Can also cause short-cycling or no-cool if contacts fail

• Disconnect power before servicing
• Access is typically from the control housing or rear service area; note wire positions before removal
• Replace one-for-one with the same terminal orientation; do not force the cam
• After install, allow one full cycle to verify defrost operation