Miketc for Model Number GHW9100LW1 After wash with normal load, cloths come out wetter than normal and need to go thru another Rinse/Spin cycle to dry. Everything else seems to be normal and no code messages. Could this be a bad water Inlet Valve? Is replacement water intlet valve P/N AP3128776?
Answer Hi Mike. Start the washer on a regular wash cycle. While filling remove the power or un plug the unit. If you can see the basket filling with water still, then this is one quick way to see if you have a bad water valve part # WP8181694. I suspect 2-common items. Make sure at least 4-1/2" and no more of drain hose is in the drain pipe. Then remove the lower panel. Get a dozen towels or a wet vac. ready to pick up a lot of water. Then remove the sump hose going to the pump intake back hose. Make sure it is clear. There is a trap you can unscrew and see if it is clogged. Reach inside the pump and if the impeller is loose spinning freely on the shaft, then you wont get a pressurized full pump out. It is part # 280187. Thank You. Read More... Answered by AppliancePartsPros.com | Wednesday, December 21, 2011