Parts for Whirlpool 5KSB555ECS0: 02 - Attachment Parts

This washer lid assembly replaces a cracked, broken, or misaligned lid so the washer can close and lock correctly, restoring safe operation and reducing cycle interruptions caused by a lid that won't align or latch.

• Covers the tub opening and aligns with the lid lock/strike for proper engagement
• Restores the safety interlock so wash cycles can start and run without interruption
• Helps contain splashing and keeps debris out of the washer when not in use
• Typical symptoms include visible cracks or shattering, warped or loose lid, broken hinge area, or intermittent lid-lock errors

• Disconnect power before servicing
• Protect the cabinet surface and support the lid during removal/installation to prevent damage
• If required by your model, transfer existing hinge hardware and fasteners to the new lid
• After installation, check alignment and ensure the lid lock engages smoothly before running a cycle

Color: black. It measures about 7 inches wide by 6 inches deep.

This yellow collar assembly secures and aligns the blender jar to the base, helping the coupling engage cleanly for smooth blending and reducing wobble. It's a direct-fit replacement when the collar is cracked, worn, or won't lock. What it does:

• Centers and locks the blender jar to the drive coupling so the blade spins correctly
• Keeps the jar stable during operation to reduce wobble and noise
• Helps maintain a proper seal to minimize leaks around the jar base
• Restores reliable engagement when the original collar is stripped or damaged

• Disconnect power and remove the blender jar before replacing the collar.
• Inspect the jar and coupling for damage; replace any cracked or excessively worn parts.
• Hand-tighten and test operation at low speed first to confirm proper engagement.

This upper blender assembly replaces the blender's top housing and blending head to restore smooth, consistent mixing in your appliance. It helps contain ingredients and support the blade for reliable performance during blending tasks. What it does:

• Houses and supports the blender blade assembly for proper rotation and mixing
• Guides ingredients toward the blade to improve blend consistency
• Helps prevent leaks and splashing from the top of the blender jar
• Can reduce unusual noise or vibration when the upper blender is damaged or worn

• Disconnect power to the appliance before starting any repair
• Handle sharp blades and edges with care; wear gloves if needed
• Follow the appliance service manual or exploded diagram for correct removal and reassembly

Color: clear. It measures about 6 inches in diameter, and 8 inches high.

Color: clear. It measures about 3-1/2 inches in diameter.

This interlock collar assembly secures the door/ lid interlock hardware so the appliance can detect a closed door and operate safely. It replaces worn or broken collars to restore proper latch engagement and switch alignment. What it does:

• Centers and holds the door interlock/switch assembly in place so the door/lid can fully engage
• Helps the cabinet detect a closed door so cycles can start and run correctly
• Commonly used when the door won't stay closed, the unit won't start, or a door-related fault appears
• Restores proper alignment between the latch and the interlock switch to prevent intermittent contact

• One interlock collar assembly

• Disconnect power (and water for washers) before starting any repair
• May require removal of the top or front panel and the door/lid latch assembly for access
• Handle plastic parts carefully to avoid cracking; verify correct fit before reassembly

This interlock collar assembly secures the door latch area so the appliance detects a closed door and allows normal operation. It restores proper door engagement and helps prevent the unit from starting with the door open. What it does:

• Centers and supports the door latch/interlock mechanism for reliable door closure
• Ensures the door switch or interlock can engage so the appliance will start when closed
• Can cause no-start, intermittent starting, or a loose/loose-feeling door if worn or broken
• Helps stop rattling or misalignment around the latch area when functioning correctly

• Disconnect power (unplug or switch off breaker) before starting any repair
• Basic disassembly may require removing the appliance front or door trim to access the collar
• Inspect the door latch and interlock switch for wear while replacing the collar

This interlock collar assembly centers and supports the door/lid interlock so the appliance can detect and secure the door during operation. Restores proper engagement of the latch for reliable start/lock behavior and safety sensing. What it does:

• Positions and stabilizes the interlock/lock mechanism so the door or lid can latch correctly.
• Helps the appliance register a closed/locked door so cycles can start and run.
• A worn, cracked, or broken collar can lead to failure-to-start, door not locking/unlocking, or intermittent door-latch problems.
• Works with the interlock/latch components to maintain safe operation of the door/lid assembly.

• Disconnect power before attempting any service; follow basic electrical safety.
• Replacement requires access to the door/lid latch—use appropriate hand tools and avoid forcing plastic tabs.
• Inspect the interlock and latch components for additional wear; replace damaged parts as needed.
• Refer to OEM instructions for model-specific removal and reassembly guidance.