Parts for Electrolux EI30EF55GSC: 03 - Backguard Parts

This shield is a molded protective trim piece that helps cover and protect internal components from debris and moisture while keeping the surrounding cabinet areas neat. It restores the appliance's original fit-and-finish. What it does:

• Covers and protects internal cabinet components from spills, dust, and debris
• Helps direct water away from sensitive parts to reduce risk of corrosion or shorting
• Restores proper trim alignment and appearance after damage or wear
• Commonly replaced when cracked, warped, missing, or causing interference/noise

• One shield

• Disconnect power to the appliance before beginning any repair
• Remove any fasteners or clips holding the old shield; trim may be secured with screws or snap clips
• Handle edges carefully; use gloves to avoid cuts and protect the finish
• Reinstall in the original orientation and test operation before returning the appliance to service

Spacer for ranges and ovens. Maintains proper spacing between components. Replace if worn, cracked, or missing to ensure correct alignment and fit.

Replace a cracked or missing power board spacer in your range. This insulating bushing mounts between the control board and chassis for proper spacing.

Fix oven lights that won't turn off, error codes E75/E35/F15, or non-responsive controls. This control board restores normal range operation.

Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.

This is a relay control board that manages the power delivered to the surface burner elements on a range or cooktop. It receives signals from the electronic oven control and switches the heating elements on and off to maintain the selected temperature. Replace this board if one or more burners fail to heat, stay on continuously, heat unevenly, or if you notice error codes related to surface element control.

This is the power supply board that provides regulated electrical power to the oven control board and other electronic components in the range. It converts incoming voltage to the levels needed by the control circuitry. Replace this board if the range display is blank, flickering, or if the oven and burner controls are completely unresponsive despite the unit receiving power.

This main wiring harness routes power and signals between a refrigerator's control board and major components, restoring reliable electrical connections for normal operation. It's a direct-replacement harness designed for plug-and-play fit where listed. What it does:

• Carries power and control signals between the main control board and components like compressor, fans, lights and switches
• Restores intermittent or lost function caused by frayed, damaged, or disconnected wires
• Helps stop symptoms such as no cooling, intermittent compressor/fan operation, or nonresponsive controls when the harness is the fault
• Maintains factory routing and connector types for proper fit and electrical continuity

• One main wiring harness as pictured

• Always disconnect power at the breaker or unplug the appliance before beginning service
• Follow the appliance wiring diagram and secure connectors fully; match connector shapes and colors to avoid misrouting
• Route harness away from moving parts, sharp edges and heat sources; use existing clips or tie-wraps where applicable

This is a replacement rating/nameplate label that restores the appliance identification and safety information printed on the cabinet. It helps keep model, serial and electrical ratings readable for service and safe operation. What it does:

• Replaces a torn, faded or missing rating/nameplate so model and serial info is visible for service.
• Restores printed electrical ratings and manufacturer markings used during diagnostics.
• Helps meet safety and inspection needs by returning legible identification to the appliance.
• Simple peel-and-stick replacement—no tools required for the label itself.

• One replacement adhesive rating/nameplate label.

• Clean and dry the surface thoroughly before applying; remove old adhesive residue.
• Align the label carefully, peel backing, and press firmly from one edge to the other to avoid bubbles.
• Do not place over vents, controls or moving parts; ensure label location is the original flat area on the cabinet.
• This is a non-electrical cosmetic/identification part—no wiring or power disconnection is required to apply, but follow general safety precautions when working on appliances.

Replace your range's wire harness if wires are frayed, connectors are damaged, or the harness is broken. Essential for restoring electrical connections.

Touch-up paint for electric ranges. Covers scratches, chips, and worn spots on exterior surfaces. Essential for restoring appearance after damage.

Push-in plug button that covers openings in the oven bottom panel. Replace if cracked, missing, or broken to keep debris out and maintain a clean finish.

Size: 8-18ab x 0.5 inch.

Connects electrical components in your range. Replace this wiring harness if the original is damaged, frayed, melted, or has loose connections.

Replace your range's damaged or worn wire harness. This internal wiring component connects electrical systems within your cooktop. Order when harness is frayed, broken, or burnt.

Replacement mounting screw for ovens and ranges. Secures panels, trim, or brackets to the appliance frame. Needed when original is stripped or missing.

Replace your range's damaged or worn wire harness. This internal wiring component connects electrical systems within your cooktop. Order when harness is frayed, broken, or burnt.

Connects electrical components in your range. Replace this wiring harness if the original is damaged, frayed, melted, or has loose connections.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Mounting screw for securing range panels, brackets, and igniters. Replace if stripped, missing, or damaged to restore proper fastening and alignment.

Size: 8-32t x 0.500 inch. Color: Black.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.