Parts for Electrolux EI30EF55GSC: 09 - Door Parts

Insulation pad for electric ranges that reduces noise and retains heat. Replace if worn, torn, compressed, or missing to restore proper sound dampening.

This is the inner glass panel that sits inside the oven door assembly. It serves as part of the insulating barrier that keeps heat inside the oven cavity and protects the outer door glass from extreme temperatures. Replace it if the glass is cracked, shattered, or if you notice excessive heat escaping from the oven door.

Mounting screw for range installation and assembly. Replaces lost, stripped, or damaged screws that secure panels, brackets, or internal components.

Replace your electric range oven door seal when compressed, frayed, or heat escapes. Maintains temperature for efficient cooking. Verify fit by model.

Replaces cracked, broken, or missing trim on your range door. This decorative trim piece restores the finished appearance around the door edge.

Clear inner glass panel that installs between the outer and innermost panes of your range oven door. Replace when cracked, shattered, or broken.

Spacer bumper for electric ranges and wall ovens. Installs between panels or components to provide proper spacing. Replace if cracked or missing.

Factory replacement support plate for electric and gas ranges. Covers and supports internal components. Replace when bent, cracked, or missing to restore proper alignment.

Handle spacer for range doors and handles. Provides proper spacing and alignment between handle and door surface. Replace if cracked, missing, or worn.

Secures the airwash glass assembly inside your electric range door. Replace if the original bracket is cracked, bent, or missing to properly mount the glass.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Size: 3/4 inch od x 1/4 inch id.

This main wiring harness routes power and signals between a refrigerator's control board and major components, restoring reliable electrical connections for normal operation. It's a direct-replacement harness designed for plug-and-play fit where listed. What it does:

• Carries power and control signals between the main control board and components like compressor, fans, lights and switches
• Restores intermittent or lost function caused by frayed, damaged, or disconnected wires
• Helps stop symptoms such as no cooling, intermittent compressor/fan operation, or nonresponsive controls when the harness is the fault
• Maintains factory routing and connector types for proper fit and electrical continuity

• One main wiring harness as pictured

• Always disconnect power at the breaker or unplug the appliance before beginning service
• Follow the appliance wiring diagram and secure connectors fully; match connector shapes and colors to avoid misrouting
• Route harness away from moving parts, sharp edges and heat sources; use existing clips or tie-wraps where applicable

This is a replacement rating/nameplate label that restores the appliance identification and safety information printed on the cabinet. It helps keep model, serial and electrical ratings readable for service and safe operation. What it does:

• Replaces a torn, faded or missing rating/nameplate so model and serial info is visible for service.
• Restores printed electrical ratings and manufacturer markings used during diagnostics.
• Helps meet safety and inspection needs by returning legible identification to the appliance.
• Simple peel-and-stick replacement—no tools required for the label itself.

• One replacement adhesive rating/nameplate label.

• Clean and dry the surface thoroughly before applying; remove old adhesive residue.
• Align the label carefully, peel backing, and press firmly from one edge to the other to avoid bubbles.
• Do not place over vents, controls or moving parts; ensure label location is the original flat area on the cabinet.
• This is a non-electrical cosmetic/identification part—no wiring or power disconnection is required to apply, but follow general safety precautions when working on appliances.

Replace your range's wire harness if wires are frayed, connectors are damaged, or the harness is broken. Essential for restoring electrical connections.

This is a replacement rating/nameplate label that restores the appliance identification and safety information printed on the cabinet. It helps keep model, serial and electrical ratings readable for service and safe operation. What it does:

• Replaces a torn, faded or missing rating/nameplate so model and serial info is visible for service.
• Restores printed electrical ratings and manufacturer markings used during diagnostics.
• Helps meet safety and inspection needs by returning legible identification to the appliance.
• Simple peel-and-stick replacement—no tools required for the label itself.

• One replacement adhesive rating/nameplate label.

• Clean and dry the surface thoroughly before applying; remove old adhesive residue.
• Align the label carefully, peel backing, and press firmly from one edge to the other to avoid bubbles.
• Do not place over vents, controls or moving parts; ensure label location is the original flat area on the cabinet.
• This is a non-electrical cosmetic/identification part—no wiring or power disconnection is required to apply, but follow general safety precautions when working on appliances.

Touch-up paint for electric ranges. Covers scratches, chips, and worn spots on exterior surfaces. Essential for restoring appearance after damage.

Push-in plug button that covers openings in the oven bottom panel. Replace if cracked, missing, or broken to keep debris out and maintain a clean finish.

Size: 8-18ab x 0.5 inch.

Connects electrical components in your range. Replace this wiring harness if the original is damaged, frayed, melted, or has loose connections.

Replace your range's damaged or worn wire harness. This internal wiring component connects electrical systems within your cooktop. Order when harness is frayed, broken, or burnt.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Mounting screw for securing range panels, brackets, and igniters. Replace if stripped, missing, or damaged to restore proper fastening and alignment.

Size: 8-32t x 0.500 inch. Color: Black.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.