Parts for Electrolux FFGS3025PSG: 02 - Backguard Parts

This steel control panel assembly restores the front console for ranges and freestanding ovens, providing a durable surface and mounting for the user controls. It replaces a cracked, dented, or nonfunctional console to improve operation and appearance. What it does:

• Provides the structural front panel and mounting surface for the control interface and electronic components
• Replaces panels with visible damage like dents, bends, or corrosion
• Restores secure mounting for switches, knobs, and displays that were loose or misaligned
• Can resolve user control issues caused by damaged or warped panels

• One steel control panel assembly

• Disconnect power to the appliance before beginning any service
• Installation typically requires removing the range console and transferring controls or hardware as needed
• Handle sharp edges and glass trim carefully; use proper tools and fasteners

The Range Overlay is an OEM part compatible with Frigidaire ranges. The overlay covers the control board and labels the button on the board.

Causes of a bad overlay can be normal wear over time with heavy use of the range, exposure to heat and impacts, or warping from temperature fluctuations around the cooking elements.

Symptoms of a faulty overlay include:

• Cracks or breaks appearing in the material
• Loose, sagging, or misaligned fitment on the front of the range
• Gaps that compromise the seal around cooking surfaces
• Discoloration or other appearance issues affecting the look

It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore range models.

The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.

Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.

Symptoms of a bad oven light rocker switch include:

• The oven light failing to illuminate when the door is opened
• The light remaining on even when the door is closed
• An inconsistent or flickering oven light
• The switch itself becoming loose, cracked, or non-responsive

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

A replacement control knob that restores tactile control of your appliance's setting dials and provides a clear indicator for selecting temperature or cycle positions. Simple push-on design replaces worn, cracked, or missing knobs for reliable use. What it does:

• Replaces a damaged or missing control knob so settings can be changed safely and accurately.
• Provides a visible pointer to selected heat, time, or cycle positions.
• Restores a secure grip when the original knob is loose, stripped, or slipping.
• Works with compatible Frigidaire control shafts that accept push-on style knobs.

• Always disconnect power to the appliance before replacing control knobs to avoid electrical or burn hazards.
• Remove the old knob by pulling it straight off the control shaft; align the new knob's opening with the shaft and push firmly until fully seated.
• No special tools are typically required, but use steady, even force to avoid damaging the shaft or new knob.

This is a replacement refrigerator door gasket that restores the seal around the door to help maintain proper temperature and efficiency. It's a direct-fit sealing strip designed to replace a worn, torn, or deformed door seal. What it does:

• Seals the gap between the door and cabinet to help keep cold air in and warm air out
• Helps reduce frost buildup and prevents moisture and leaks around the door
• Restores consistent internal temperature for better food preservation
• Reduces compressor run time caused by an improper door seal

• One refrigerator door gasket

• Recommended: replace gasket on a clean, dry door surface; remove old gasket and adhesive residue before installing
• Use the manufacturer's recommended attachment method (snap-in or adhesive) for your model
• Inspect hinge alignment and door fit before finalizing gasket installation to ensure an even seal
• For safety, unplug the appliance or disconnect power before beginning repairs

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.