Parts for Electrolux FGGF3032MWE: 02 - Backguard Parts

This control panel overlay is a replacement decal that restores button labels and indicators on the appliance console for clear operation and a finished appearance. It helps make controls legible and keeps the console looking original. What it does

• Replaces worn, faded, or damaged control labels so settings and functions are easy to read
• Restores the appliance's original look by covering scratches and surface wear on the console
• Helps prevent accidental button misuse by clearly showing control locations and icons
• Works with the console surface to provide a consistent user interface appearance

• One control panel overlay (as shown)

• Designed to fit over the existing console; remove power before beginning any work
• Clean and dry the console surface thoroughly before applying the overlay for best adhesion
• Follow OEM alignment marks or guides during placement to ensure proper fit and function
• If removal of the console is required, keep screws and fasteners labeled and secure for reassembly

Restore proper oven operation with this electronic control board. It manages bake and broil functions and the display, helping bring back consistent heating and a readable clock/timer when the original control fails. What it does

• Directs power to bake and broil circuits based on user selections
• Controls oven temperature cycling using sensor feedback
• Drives the digital clock, timer, and status display
• Typical failure symptoms: dead or dim display, oven won't start or heat, unresponsive controls, intermittent operation, or error beeping

• 1 electronic control board assembly

• Disconnect power at the breaker before servicing
• Access the control behind the control panel; remove panel/console screws to reach it
• Move wires one at a time to the new board; photograph connections and reuse brackets/insulators as needed
• Handle by the edges and protect from static; for any required setup/calibration after installation

This is a replacement control knob for range models. It lets you turn the valve or switch to adjust burner or oven settings, restoring a secure grip and clear control when the original knob is worn, broken, or missing.

• Rotates the control shaft to set heat levels or functions
• Helps when the knob is cracked, stripped, loose, or missing
• Restores accurate, easy adjustment of the control
• Direct-fit design for the specified control shaft style

• Disconnect power and allow the appliance to cool before service
• Pull the old knob straight off the control shaft
• Align the new knob with the flat/D-shaft and press firmly into place
• Test for smooth rotation and proper engagement of the control

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.