Parts for Frigidaire FGGF3054MFA: 03 - Backguard Parts

This replacement panel forms the finished control area of your appliance. It provides a sturdy mounting surface for the user interface and protects the electronics behind it, restoring proper alignment, appearance, and protection when the original panel is damaged. What it does:

• Covers and protects the control compartment and wiring
• Provides mounting points for the control board, switches, knobs, and/or overlay
• Keeps controls aligned and secure for proper operation
• Common signs it's needed: dents, cracks, broken tabs, sharp edges, or controls that won't sit flush or stay secured

• One panel

• Disconnect power at the breaker; shut off gas supply if applicable
• Wear cut-resistant gloves—panel edges can be sharp
• Transfer existing control components, brackets, and hardware from the old panel to the new one; label wires or take photos for reference
• All screws and harness connections are secure before restoring power and testing

The Overlay is an OEM part for Frigidaire ranges and ovens. This component is a thin, decorative sheet that covers and protects the control panel, providing a user-friendly interface for selecting and managing cooking settings.

Causes of a bad overlay can include wear and tear from regular use, exposure to heat and cleaning chemicals, or physical damage due to impacts or mishandling. Over time, the overlay can become cracked, faded, or delaminated, impairing its functionality and appearance.

Symptoms of a bad overlay include:

• Fading or peeling of the surface graphics
• Cracks or tears on the overlay
• Difficulty in reading or using the control panel
• Buttons or touch controls becoming unresponsive

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board is an OEM part for Frigidaire ranges. This part manages and regulates the functions of the range, including the oven temperature, cooking modes, and timing, ensuring precise control and efficient operation.

Causes of a bad control board can include electrical surges, overheating, or component failures due to regular wear and tear.  

Symptoms of a bad Control Board include:

• The range or oven not powering on
• Inaccurate temperature settings
• The display showing error codes or not functioning properly
• Unresponsive or malfunctioning buttons and controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Knob is an OEM part for Frigidaire ranges and ovens. It allows the user to control the settings of the appliance, such as temperature and cooking modes, by turning the corresponding control valves or switches.

Over time, knobs can break, crack, or become stripped due to frequent use, making it difficult to adjust the settings accurately.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob spinning freely without changing settings
• The knob becoming loose or falling off
• Inaccurate temperature or mode settings

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement control knob restores a secure, easy-to-read interface for adjusting your appliance's settings. It lets you smoothly turn the control shaft to select heat or function when the original knob is cracked, stripped, or missing. What it does:

• Attaches to the control shaft to turn functions on/off and adjust settings
• Provides a firm grip and clear pointer for accurate selection
• Common symptoms include a cracked knob, worn or missing indicator, loose/wobbly fit, slipping, or falling off
• Helps ensure the control returns to and indicates Off correctly when fully seated

• One control knob

• Allow the appliance to cool; for safety, disconnect power or shut off gas if applicable
• Pull the old knob straight off the control shaft—do not twist the shaft
• Align the keyed/flat side of the hub with the shaft and press the new knob on until fully seated
• Verify the pointer aligns with Off and turns smoothly; transfer any reusable insert/adapter from the original knob if your model uses one
• Some models use position-specific knobs; match markings and part number to your original

This trim is a decorative finish piece for select ranges and wall ovens. It covers gaps and raw edges for a clean look and helps keep adjacent panels properly seated when the original becomes cracked, bent, or missing.

• Provides a finished appearance by covering exposed edges or gaps
• Helps maintain alignment of nearby panels or glass
• Replace if cracked, warped, missing, or no longer seats securely
• Common symptoms include loose/rattling panels and exposed or sharp edges

• Disconnect power; for gas models, also shut off the gas supply
• Wear gloves—edges can be sharp
• Remove old trim and transfer/reuse original screws or clips
• Align the new trim and secure with existing fasteners; confirm proper fit before reassembly

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.