Parts for Frigidaire LGGF3046TFC: Backguard Parts

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

This small protective cap covers and protects exposed appliance hardware, keeping dirt and moisture out while preventing accidental contact. It's a simple replacement that restores a finished appearance and helps maintain part integrity. What it does:

• Covers and protects an exposed shaft, tab, or fastener from debris and wear
• Helps prevent accidental contact with sharp or moving parts
• Restores the finished look of the appliance where the original cap was lost or damaged
• Simple, passive part—no electrical or mechanical function to reconfigure

• One replacement protective cap

• Always unplug the appliance or disconnect power before servicing
• Remove the damaged cap by hand or with a gentle pry tool; press the replacement into place until fully seated
• Small part—keep away from children and pets; loss is common during disassembly

The Control Panel is an OEM part for Frigidaire ranges. It incorporates the digital displays, buttons, and touch controls that allow selection and adjustment of range features like oven temperatures, timers, and stove functions. Positioned at the front of the appliance for easy access, the control panel facilitates convenient operation.

Causes of a bad control panel can include normal wear over time from repeated use. Exposure to moisture, impacts or other physical damage through accidents or mishandling are also potential causes.

Symptoms of a bad range control panel include:

• Non-responsive or uncalibrated buttons and touch areas
• Digits or icons that are dimmed, flickering or unlit on displays
• An inability to power range components on or off
• Malfunctioning temperature, timer or setting controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Control Board is an OEM replacement part for  Frigidaire electric ranges. It regulates power to surface heating elements, oven functions, temperature calibration, and sensor monitoring. Interface buttons and LED lights connect to it.

Symptoms of a bad control board include:

• Elements not heating properly or not at all  
• Temperature calibration issues 
• Stovetop buttons/knobs not working
• Oven not baking/broiling as expected
• Error codes or failure to advance through presets

Causes can be power surges over time, moisture in circuits, or wear of integrated sensors/switches. Periodic cleaning helps prevent issues.  

This Genuine OEM Frigidaire control board is also compatible with select Electrolux, Gibson, Kelvinator, and Kenmore electric ranges.

The Overlay is an OEM part for Frigidaire ranges and ovens. This part serves as the protective and decorative cover for the control panel. It features the control labels and markings that guide users in operating the appliance, making it an essential element for both functionality and aesthetics.  

Symptoms of a bad Overlay include:

• Peeling or fading labels, making it difficult to read settings or operate the appliance correctly.
• Cracks or damage to the overlay, which can lead to moisture infiltration and potential damage to the underlying electronic components.
• Adhesive failure, causing the overlay to detach from the control panel, which can interfere with the operation and overall appearance of the appliance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Knob is an OEM component specifically designed for Frigidaire ranges. This knob controls temperature settings for the oven bake or broil functions. 

Symptoms of a bad knob can include the inability to turn it, loosening from the stem attachment point or worn lettering/numbers rendering settings illegible. 

Causes of a bad knob can be normal wear and tear over time, damage from heat exposure during cooking, or accidental impact warping the knob's shape.

Causes of a bad knob include:

• Loose attachment making requested settings impossible 
• Faded or missing numbers hampering temperature selection
• Cracks or breaks rendering the knob unusable

This OEM knob replacement restores the full functionality of oven temperature control. It is designed to withstand consistent heat and maintain visibility.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today before the issue worsens.
 

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.