Need Help?
Call or text
Show parts
Replacement side panel for your dryer. Installs on the exterior cabinet to restore structural integrity. Needed when the original panel is cracked, dented, or damaged.
Usually ships within 4 - 14 days
Exterior front panel and door trim that restores your dryer's appearance. Replaces cracked, dented, or missing panels while protecting the control area.
Sealing ring creates airtight barrier to prevent leaks in your dryer. Replace when worn or cracked to restore proper seal. Verify fit with your model.
Dryer not heating or showing E06 error? A faulty heating element is often the cause. This part warms air in the drum to dry clothes effectively.
The Limiter-Temperature is an OEM component specifically designed for select Bosch vented dryers requiring controlled heat. As a safety device, it restricts air exiting the exhaust to prevent accidental ignition of accumulated lint.
Precisely calibrated mechanothermal links automatically trip circuit breakers upon exceeding preset levels. Isolated housings shield reactive alloys from moisture while enabling thermodynamics to naturally trigger protective functions.
Causes requiring replacement involve over-heating from sustained over-drying preventing auto-stops. Physical damage exposing reactive cores could also impair intended response times.
Symptoms signaling the need for a new temperature limiter include:
This OEM Bosch replacement component is also compatible with some Gaggenau, Thermador, and select Kenmore dryers employing sensitive temperature cutoffs. Correct installation restores critical overheat protection circuits.
If your dryer stops mid-cycle or won't heat, the high limit thermostat may have failed. This safety component prevents overheating by cutting power.
Replace your dryer's duct if cracked, damaged, or missing. This duct channels air through the system for proper ventilation and efficient drying performance.
The Dryer Door Latch is an OEM part for Bosch clothes dryers. Located on the dryer cabinet door, this latch mechanism securely holds the door closed during drying cycles. Its durable construction allows smooth, controlled opening and closing of the dryer door.
Causes of a bad dryer door latch can include worn or broken latch parts from repetitive use. Accidental damage from overtightening or impact could also cause issues. Mineral or lint buildup over time may inhibit proper latch function.
Symptoms of a bad dryer door latch include:
This genuine Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
This replacement seal restores a tight, leak-resistant connection between mating components inside your appliance. Replacing a worn seal helps stop drips at the joint and keeps the system operating reliably without nuisance leak faults.
Dryer stops mid-cycle or won't heat properly? The temperature regulator monitors air temperature and signals the control board. Simple repair.
Fix clothes that won't dry or over-dry with a new dryer moisture sensor. This drum-mounted sensor detects moisture levels to optimize drying cycles.
Dryer won't start or stops mid-cycle? A faulty door switch fails to detect when the door is closed. This replacement switch restores reliable operation.
The Sealing is an OEM part for Bosch dryers. This part is responsible for creating a tight seal around the lint filter housing, preventing lint and debris from escaping into the dryer and ensuring efficient airflow during the drying process. It traps lint and prevents it from circulating within the dryer, reducing the risk of clogs and potential fire hazards.
A bad sealing can occur due to wear and tear, exposure to heat and humidity, or accidental damage. Signs of a faulty sealing include visible cracks, gaps, or a loose fit around the lint filter housing.
Symptoms of a bad sealing include:
Replace your worn-out or damaged sealing with this genuine OEM Bosch part to restore your dryer. This Bosch part can also be used on Thermador and Gaggenau appliances.
Captures lint and debris during drying cycles. Replace when mesh is damaged, torn, or clogged beyond cleaning. Verify fit with your model number.
Structural holder component for dryers. Secures internal parts in proper position. Replace if broken, cracked, or missing to restore proper fit.
The cover is an OEM replacement part responsible for covering and securing the dryer door latch. It ensures that the door latch mechanism functions properly by preventing it from getting damaged or misaligned during regular use. Located on the dryer's front panel, the door latch cover serves as a protective barrier that keeps the door latch mechanism in place
Causes of a bad dryer cover can include wear and tear over time, accidental damage such as cracks or dents, or exposure to heat and moisture. A damaged cover can lead to exposure of internal components, which may result in performance issues or safety hazards.
Symptoms of a bad Dryer Cover include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
This part is discontinued by the manufacturer and is no longer available for purchase.
The Wheel is an OEM part for Bosch clothes dryers. It is an essential component that works with the drum to tumble clothes, facilitating effective drying action during cycles.
Wheels can cause shorts and come loose over time from heavy drum usage, leading to:
Causes of a faulty wheel tend to be wear and tear over time from carrying heavy loads inside a spinning drum. Foreign objects inside the drum can also potentially cause damage.
It is also compatible with some Thermador, Gaggenau, and Kenmore dryer models.
Dryer won't start or shows error codes? A faulty cable harness disrupts electrical connections. This internal wiring assembly restores communication.
If your dryer isn't drying efficiently or has moisture buildup, the air channel may need replacement. Guides airflow for proper venting and performance.