Black Max Lawn Mower Parts

A carbon canister air filter is an important piece that helps machines operate in accordance with environmental safety standards. This carbon canister air filter is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as lawn mowers, tillers, string trimmers, edgers, log splitters, and wood chippers. It is compatible with products by brands such as Craftsman, Cub Cadet, MTD, Huskee, and Yard-Man.The carbon canister air filter part is a crucial device that is found in machines with small engines. The air filter is designed to decrease the amount of air pollution that the machine emits. It is serves the important purpose of increasing the machine's fuel efficiency. The carbon canister air filter traps the vapor the machine releases, but rather than letting it escape the fuel tank, it re-routes it back into the engine.The replacement or repair process of the carbon canister air filter should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This part can be used to replace a deteriorating or broken throttle linkage spring, which helps to regulate the speed of outdoor power equipment.As throttle linkage springs age they begin to wear out or can easily break. This can cause serious problems with regulating the speed of outdoor power equipment such as lawn mowers and trimmers. A broken or weak throttle linkage spring will stop the throttle on the equipment from returning to the off or resting position when the throttle is released. This can be dangerous. This throttle linkage spring is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement throttle linkage spring fits various different MTD, Cub Cadet, Craftsman, and Troy-Bilt models of lawn mowers, log splitters, and trimmers. Please note that this part is sold individually.

This part is a carburetor stud. A carburetor mixes fuel and air before delivering it to the engine. The carburetor stud, often called carb stud, is used to ensure a tight seal between the carburetor and the intake manifold. It is important that air and other dirt or debris do not enter the engine, and so this seal between the carburetor and the intake manifold is very important.A carburetor stud may need to be replaced if it is stripped or worn. Of course, a new carburetor stud will be needed if it is missing. If the carburetor and the intake manifold do not have a tight seal, it could be possible that new carburetor studs are needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific carburetor stud is compatible with engines, lawnmowers, and log splitters manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This upper handle is a genuine OEM replacement part sourced directly from the manufacturer for use on push lawnmowers. The upper handle is u-shaped and designed for the operator to hold while walking behind the lawnmower. The sides of the upper handle are used as attachment points for various control cables that the user needs while using the lawnmower. Over time, this upper handle may become rusty or damaged due to normal wear and tear or exposure to the elements. If this occurs, the handle can be removed and replaced to restore the lawnmower to its original condition. Make sure the lawnmower is parked on a flat surface. Disconnect the spark plug. Locate the screws on both sides of the handle and remove them. Slide the handle up to remove it from the lower section of the mower. Insert the sides of the new handle in the lower part of the mower. Insert the screws and tighten to hold the handle in place.This upper handle is a black metal part that is sold individually. It is designed for push lawnmowers manufactured by MTD and Cub Cadet.

An air filter is a machine's first line of defense against tiny particles that may clog and disrupt an engine or carburetor's efficiency. When air passes through, its filter media traps or captures dust and dirt. Eventually, the accumulation can become problematic. This is because a dirty filter also restricts optimal airflow. The carburetor needs air to create the engine's required combustible mixture. At this point, a dirty air filter can mean overheating, as well as uneven fuel-air ratio production. For optimum filtering performance, it is necessary to periodically install a brand-new air filter. It is a simple procedure and doesn't require any tools. Replacement is straight-forward. Simply take out the old filter and insert the new one. This original MTD air filter is compatible with lawnmowers from Yard-Man and MTD. It is also compatible with some Honda engine models. This brand-new air filter is sold individually.

One of the essential parts of a walk-behind lawn mower is the gas cap. Many people don't notice that mower fuel caps are almost always rubberized or hard plastic and that they are black in color. These are specific design reasons for this. Other openings in the mower's body, especially the oil fill, are coded with different colors. This is meant to prevent users from pouring any incorrect substance into a container where it could damage the mower in any way. The rubber or hard plastic cap is meant both to be durable and non-conductive. In the past, mower caps were made of vented steel, which was conductive. Since a gallon of gasoline has the explosive potential of two sticks of dynamite, manufacturers have resorted to a number of wise safety measures to prevent accidents. As durable as they are, these caps do sometimes need to be replaced. If a cut or a heat-related deformation causes the cap to lose its water-tight capability, it must be replaced. Often caps are lost when users forget to replace them after gassing up. When choosing a replacement cap for a Troy-Bilt, MTD, or Yard-Man mower, make sure to select one like this OEM genuine certified replacement fuel cap. It's important to make sure the generator is not running when you replace the cover.

This engine baffle assembly is a genuine MTD part, sold individually. This engine baffle assembly can be used as a replacement part in a lawn mower. The purpose of the engine baffle assembly in a lawn mower is to seal off the area in and around the engine cylinder so that the air flow remains pressurized in the chambers both above and below the engine cylinder.The engine baffle assembly in a lawn mower might need to be replaced if it assembly suffers damage that prevents the component from serving its general function. This could occur if the engine baffle assembly has been punctured, dented, cracked, warped, or eroded to the point of reduced or no functionality. If this occurs, the engine baffle assembly should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This engine baffle assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, and Yard Man.

This replacement part is a baffle bag assembly. This part is a genuine replacement part made by MTD. This part is commonly found in lawnmowers. It's responsible for collecting grass clippings and other debris during use.A new baffle bag assembly might be needed if the current bag is not in working condition. This can mean being missing or damaged in any way including being torn. If debris and grass clippings are not being expelled in the correct area, it might be a good idea to replace this part. Be sure the engine is completely turned off before attempting to replace or install this part. This baffle bag assembly is a genuine OEM replacement part made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This replacement part is a wheel. This is a genuine replacement part made by MTD. Wheels are commonly found in lawn mowers and assist the user in maneuvering the machine in different directions. A new wheel assembly might be needed if any of the current wheels are missing or damaged. It is not unusual for wheels to lose traction over time and not work as effectively as during prior uses. If the machine is unable to maneuver as smoothly as before, it might be time to replace the wheels. Be sure the lawn mower is powered down and cooled off before attempting to replace any of the wheels. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.

This brake assembly bolt is a genuine MTD part that is manufactured to be a replacement part for lawn tractors, push walk-behind mowers, log splitters, trimmers, chippers, shredders, and other engines.On engines such as these, the brake assembly helps work the brake, which stops the engine and any forward motion. It is not abnormal for brake assembly bolts to become worn over time and need to be replaced. This brake assembly bolt is designed for use with machines made by Black Max, Craftsman, Columbia, Cub Cadet, Huskee, Husky, Mastercut, MTD, Remington, Yard Machines, and Yard-Man. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This genuine replacement part is a self-tapping screw. A self-tapping screw is a small screw that taps into place with relative ease. Lawnmowers have many screws that secure a variety of different parts. Whether they hold the housing of the various mechanical components or are used as mounting screws for other various parts, self-tapping screws are essential in holding all the different parts of the mower together. Over time, self-tapping screws that are exposed to the elements can rust and deteriorate. If they become too damaged, they might no longer do their job effectively and will need to be replaced. Luckily replacing these screws is a very simple process. To replace the screws, simply unthread the damaged screws and replace them with the new self-tapping screws. If the screws are stripped or too corroded to be removed, consider prying them out with a screwdriver or using a pair of needlenose pliers to rotate them out of their position. This OEM part is sold individually and is compatible with MTD brand mowers.

This replacement part is a nut and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A nut is a common part and is found in many types of machinery and appliances. These nuts help hold certain parts in place and secure so that the engine can run properly and smoothly.A new nut might be needed if the current one is visibly damaged or missing. Nuts can become stripped overtime due to normal wear and tear. This is common as nuts are heavily used inside the machine. If parts are falling apart or becoming loose, it might be time to replace the nuts. This part is sold individually but many machines require more than one. Be sure to purchase the correct amount. This is an OEM replacement part and is sourced directly from the manufacture to ensure a proper fit in many appliances.