Parts for Briggs & Stratton 122232-0119-E8: Blower Housing, Flywheel, Gear Reduction, Rewind Starter Parts

This replacement part is an oil seal and is intended for use in different types of lawn equipment. This part is a genuine replacement part made by Midwest Engine. Oil seals are typically found in machines with small engines and help ensure that the oil stays within the designated area. The seal is responsible for making sure there are no leaks during or after use. A new oil seal might be needed if the current one is missing or damaged. This can include being cracked or chipped. Any damage may cause oil to leak which can lead to additional problems within the machine itself. Be sure to wear work gloves during this repair as oil is difficult to remove from hands. Refer to the appropriate owner's manual before replacing this part. This oil seal is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.

This part is a replacement screw. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. If the current screw is defective or lost, this part can be used as a replacement. It is intended for use with outdoor power equipment.Screws are an essential piece of standard hardware that secures together different components. If the current screws are lost, corroded, stripped, or ineffective, they will need to be replaced with a genuine OEM part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is suitable for use on outdoor power equipment manufactured by Midwest Engine, Briggs and Stratton, other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a replacement for a blower housing on select models of engines used in blowers and vacuums. The blower housing is a durable plastic part that holds the blower hose for intake and outflow of the air in the machine. This is where the fan will be located that creates the vacuum to suck air into or out of the unit and provide the proper operation. if the blower housing is damaged, broken, or otherwise not working, the unit may not function at all. This genuine OEM part is a replacement that is manufactured to exact standards by Briggs and Stratton. It can also be used in select models from Toro. It is going to be the solution for anyone who needs a new blower housing for their unit. This piece is sold as an individual assembly and does not include related parts or hardware; those will require a separate purchase. The blower housing will require screwdrivers to replace. Always wear gloves and disconnect the power supply before performing repairs like this. It will also be a good idea to work in a well-ventilated area and allow the unit to cool to avoid burns or other issues.

The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.

This durable plastic ratchet pawl is used on select engines that feature what is known as a Susa starter. In this configuration, the ratchet pawl will be responsible for engaging the recoil starting system. Then, the starting system will allow the engine to fire. Over time, the pawl can become worn or damaged due to regular use. If this happens, the recoil can slip and cause difficulties with starting the engine. If the engine isn’t starting or you can hear it slipping when you try to fire it up, a replacement ratchet pawl could be needed. Be sure to allow the engine to cool before replacing any parts or doing any work and always wear gloves. This replacement is a genuine OEM part that includes two ratchet pawls for various Briggs & Stratton engines on small lawn equipment. This part offers compatibility with over 150 engines from Briggs & Stratton, Toro, Lawn-Boy, and Vanguard by Briggs & Stratton.

This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This starter rewind, also called a pull start, rope start, or recoil starter, is a genuine OEM part made by Midwest Engine. A starter rewind is a component of an internal combustion engine on an appliance used to start and set the engine in motion. This starter rewind replacement part works with engines, chipper shredders, lawn mowers, leaf blowers, and tillers. With extended long-term use, starter rewinds can be subject to damage, malfunction, and disrepair. This damage can only grow worse with further usage, so it is recommended that the problem be addressed when a starter rewind either grows detached, becomes frayed, or breaks entirely. It will be obvious if a starter rewind is not working, as the engine will not start. This could manifest visually in issues with the pull cord not catching or the engine simply stalling or giving out entirely. This will require, at a bare minimum, a replacement starter rewind. Always wear gloves when handling, repairing, and operating outdoor equipment.This starter rewind works with the brands Briggs and Stratton, Cub Cadet, Toro, and Simplicity. Part sold individually, and any additional hardware needed will have to be purchased separately.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.