Parts for Ge DSKP333EC6WW: Blower & Motor Parts

This bracket belt switch assembly secures the dryer belt switch and helps stop the motor if the belt slips or breaks, protecting the dryer from damage and preventing unsafe operation. It's a direct-fit replacement for the original mounting assembly. What it does

• Holds the belt switch in the correct position so it can sense belt tension.
• Opens the circuit when the belt is loose or broken to stop motor operation.
• Can resolve symptoms like a dryer that stops mid-cycle, fails to start, or runs but won't tumble.
• Restores the original mounting and switch alignment for reliable belt sensing.

• One bracket belt switch assembly

• Disconnect power before beginning—this part is used on electric and gas dryers.
• Basic hand tools (screwdriver/socket) are typically required; keep track of mounting hardware.
• Inspect the belt and pulleys while replacing the bracket; replace any worn parts.

This factory screw secures dryer panels and internal components, keeping assemblies tight and aligned so the machine operates safely and without vibration or rattling.

• Fastens sheet-metal panels, brackets, or trim to the dryer cabinet/frame
• A loose or missing screw can cause panel vibration, noise, or misalignment
• Helps restore stability after service or when original hardware is lost
• Typical symptoms include rattling, loose panels, or gaps in trim

• Unplug the dryer before servicing
• Keep track of original screw locations and lengths; replace like-for-like
• Start screws by hand to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, inspect mating hole or clip before installing

7" diameter

This motor strap secures the appliance motor to the cabinet, keeping the motor stable during operation to reduce vibration and noise. Use this replacement to restore proper motor positioning and support in compatible models. What it does:

• Holds the motor firmly in place to prevent movement or shifting during use
• Helps reduce vibration and associated noise caused by a loose motor
• Maintains correct motor alignment so belts and linkages run smoothly
• Commonly used when a worn or broken strap allows motor sag or misalignment

• One motor mounting/retaining strap

• Disconnect power to the appliance before beginning any work
• Inspect mounting points and fasteners; replace any damaged hardware as needed
• Secure strap to the motor and cabinet using the original mounting holes and recommended hardware

The Drive Belt is an OEM replacement part for GE dryers. It wraps around the drum, idler pulley, and motor pulley, playing a crucial role in rotating the drum and tumbling clothes during a drying cycle. This ensures that air circulates evenly, resulting in uniform drying.

Symptoms of a bad Drive Belt include:

• The drum not turning, but the motor still running
• A squealing or thumping noise during operation
• Clothes taking longer to dry
• Visible wear or fraying of the belt upon inspection

Causes for a malfunctioning Drive Belt can include regular wear and tear from continuous use, overloading the dryer with heavy or unbalanced loads, or the belt slipping from its designated path on the pulleys.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This idler spring provides tension for the dryer belt so the drum turns smoothly and evenly. Replacing a worn spring restores proper belt tracking and reduces slipping or noisy operation. What it does:

• Maintains proper tension on the dryer drive belt so the drum rotates correctly
• Keeps the belt aligned on the idler/tensioner pulley and motor pulley
• Prevents belt slippage that can cause the drum to stop or turn intermittently
• Helps reduce squealing, grinding, or rubbing noises from the drive assembly

• Disconnect power to the dryer (unplug or shut off circuit) before starting work.
• Access usually requires removing the dryer front or top panel—refer to your model's service instructions.
• Inspect the belt and idler pulley for wear and replace if damaged while the unit is open.
• Use care when releasing or installing the spring—it is under tension; wear eye protection and gloves.

This pulley keeps the dryer drive belt properly guided and tensioned so the drum rotates smoothly. Replacing a worn pulley restores reliable belt tracking and helps eliminate belt noise and slipping. What it does

• Guides and tensions the dryer drive belt so the drum spins evenly.
• Prevents belt rubbing and reduces squealing or grinding noises.
• Helps stop belt slipping that can cause the drum to stop turning or tumble intermittently.
• Supports smooth, quiet drum rotation for consistent drying performance.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Access may require removing the dryer front panel or lower access panel; follow the appliance's service instructions.
• Inspect the drive belt and replace if cracked or stretched when installing the pulley.
• Reassemble panels and test the dryer on a short cycle to ensure proper belt tracking and quiet operation.

The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.

Symptoms of a faulty interlock switch include:

• Dryer failing to start or running with the door open  
• Timer display not illuminated when start button is pressed  
• Inability to open the dryer door during operation
• Dryer suddenly stopping mid-cycle before fully drying clothes

Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance. 

This genuine GE switch is compatible with Hotpoint and RCA dryers as well.

Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.