Parts for Ge DSKS433EB6WW: Blower & Motor Parts

This bracket belt switch assembly secures the dryer belt switch and helps stop the motor if the belt slips or breaks, protecting the dryer from damage and preventing unsafe operation. It's a direct-fit replacement for the original mounting assembly. What it does

• Holds the belt switch in the correct position so it can sense belt tension.
• Opens the circuit when the belt is loose or broken to stop motor operation.
• Can resolve symptoms like a dryer that stops mid-cycle, fails to start, or runs but won't tumble.
• Restores the original mounting and switch alignment for reliable belt sensing.

• One bracket belt switch assembly

• Disconnect power before beginning—this part is used on electric and gas dryers.
• Basic hand tools (screwdriver/socket) are typically required; keep track of mounting hardware.
• Inspect the belt and pulleys while replacing the bracket; replace any worn parts.

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

• Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
• Secures brackets, panels, and assemblies to the tub or frame
• Helps resolve symptoms like loose panels, vibration, or rattling noises
• Restores proper hold when the original screw is stripped, missing, or damaged

• Disconnect power and shut off water to the dishwasher before servicing
• Match length and thread to the original; replace screws one at a time to maintain alignment
• Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
• Verify no wires or hoses are pinched before reassembly

• Size: #10-16 x 1/2 inch
• Head: hex washer-head
• Type: AB tapping screw

7" diameter

This replacement motor strap secures the dryer's drive motor to its mounting bracket so the motor and blower stay aligned and stable, helping reduce vibration and noise for smoother operation. What it does:

• Holds the drive motor firmly to the base/bracket
• Maintains proper alignment of the motor and blower wheel to prevent rubbing
• Helps reduce vibration, rattling, and related noise
• Typical signs of failure: increased vibration, rattling, scraping from the blower area, or a motor that feels loose inside the cabinet

• Includes 1 motor strap

• Disconnect power; for gas dryers, also shut off gas supply
• Access the motor assembly; note the strap's routing/orientation before removal
• Support the motor while releasing the strap to avoid stressing wiring and mounts
• After securing the strap, rotate the drum/blower by hand to verify free movement before reassembly

This motor strap secures the appliance motor to the cabinet, keeping the motor stable during operation to reduce vibration and noise. Use this replacement to restore proper motor positioning and support in compatible models. What it does:

• Holds the motor firmly in place to prevent movement or shifting during use
• Helps reduce vibration and associated noise caused by a loose motor
• Maintains correct motor alignment so belts and linkages run smoothly
• Commonly used when a worn or broken strap allows motor sag or misalignment

• One motor mounting/retaining strap

• Disconnect power to the appliance before beginning any work
• Inspect mounting points and fasteners; replace any damaged hardware as needed
• Secure strap to the motor and cabinet using the original mounting holes and recommended hardware

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

The Drive Belt is an OEM replacement part for GE dryers. It wraps around the drum, idler pulley, and motor pulley, playing a crucial role in rotating the drum and tumbling clothes during a drying cycle. This ensures that air circulates evenly, resulting in uniform drying.

Symptoms of a bad Drive Belt include:

• The drum not turning, but the motor still running
• A squealing or thumping noise during operation
• Clothes taking longer to dry
• Visible wear or fraying of the belt upon inspection

Causes for a malfunctioning Drive Belt can include regular wear and tear from continuous use, overloading the dryer with heavy or unbalanced loads, or the belt slipping from its designated path on the pulleys.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This idler spring provides tension for the dryer belt so the drum turns smoothly and evenly. Replacing a worn spring restores proper belt tracking and reduces slipping or noisy operation. What it does:

• Maintains proper tension on the dryer drive belt so the drum rotates correctly
• Keeps the belt aligned on the idler/tensioner pulley and motor pulley
• Prevents belt slippage that can cause the drum to stop or turn intermittently
• Helps reduce squealing, grinding, or rubbing noises from the drive assembly

• Disconnect power to the dryer (unplug or shut off circuit) before starting work.
• Access usually requires removing the dryer front or top panel—refer to your model's service instructions.
• Inspect the belt and idler pulley for wear and replace if damaged while the unit is open.
• Use care when releasing or installing the spring—it is under tension; wear eye protection and gloves.

This pulley keeps the dryer drive belt properly guided and tensioned so the drum rotates smoothly. Replacing a worn pulley restores reliable belt tracking and helps eliminate belt noise and slipping. What it does

• Guides and tensions the dryer drive belt so the drum spins evenly.
• Prevents belt rubbing and reduces squealing or grinding noises.
• Helps stop belt slipping that can cause the drum to stop turning or tumble intermittently.
• Supports smooth, quiet drum rotation for consistent drying performance.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Access may require removing the dryer front panel or lower access panel; follow the appliance's service instructions.
• Inspect the drive belt and replace if cracked or stretched when installing the pulley.
• Reassemble panels and test the dryer on a short cycle to ensure proper belt tracking and quiet operation.

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

• Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
• Secures brackets, panels, and assemblies to the tub or frame
• Helps resolve symptoms like loose panels, vibration, or rattling noises
• Restores proper hold when the original screw is stripped, missing, or damaged

• Disconnect power and shut off water to the dishwasher before servicing
• Match length and thread to the original; replace screws one at a time to maintain alignment
• Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
• Verify no wires or hoses are pinched before reassembly

• Size: #10-16 x 1/2 inch
• Head: hex washer-head
• Type: AB tapping screw

This motor and pulley assembly drives the dryer drum so clothes tumble and dry. It replaces a worn or failed drive motor and integrated pulley to restore normal drum rotation and drying performance. What it does

• Turns the dryer drum by driving the drive belt and maintaining proper drum rotation
• Replaces a noisy, weak, or seized drive motor that causes squealing or no-tumble symptoms
• Restores consistent tumbling when the motor fails to start or cuts out during cycles
• Works with the existing belt and mounting hardware when those components are undamaged

• One motor and pulley assembly (single unit)

• Disconnect power (unplug or switch off breaker) before beginning service
• Requires basic hand tools and access to the dryer cabinet; follow OEM service manual for disassembly
• Verify belt condition and install routing before mounting the motor; replace belt if worn

This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.

• Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
• Restores proper fit when an original screw is missing, stripped, or damaged
• Helps eliminate rattling or vibration from loose hardware
• Keeps components safely in place during operation

• Disconnect power to the appliance before servicing
• Match length, head style, and thread to the original; install in the same location/quantity
• Start threads by hand to avoid cross-threading; tighten with the correct driver
• Do not overtighten, especially into plastic or thin sheet metal