Parts for Husqvarna 96730360100: Blower Parts

Belt cover for riding mowers and tractors. Protects drive belts from debris and damage. Replace if cracked, broken, or missing to ensure safe operation.

Flat upper keeper for riding mowers and tractors. Secures components in place during operation. Replace if cracked, broken, or missing for proper fit.

Replace your riding mower's backside idler pulley if it's cracked, worn, or causing belt misalignment. Installs behind the deck to maintain proper tension.

Replace your riding mower's pulley if the original is cracked, worn, or damaged. This pulley component ensures proper belt alignment and rotation.

Replace your riding mower's blower impeller auger if grass clippings aren't collecting properly or the bagger system isn't working efficiently.

V-idler pulley for riding mowers and tractors. Replace if you notice belt slipping, unusual noise, or wobbling. Verify fit using your model number.

Replace your riding mower bearing when you notice noise, wobbling, or rough rotation. Restores smooth operation and prevents damage. Verify fit with your model number.

Upper idler mount for riding mowers and tractors. Secures the idler pulley assembly to the deck frame. Replace if cracked, broken, or damaged.

Idler arm for riding mowers controls belt tension on the drive or mower deck system. Replace if worn, cracked, or causing belt slippage. Verify fit with your model number before ordering.

Tension spring for riding mower internal mechanisms. Secures components while allowing controlled motion. Replace if stretched, broken, or missing.

This hood latch is a genuine Tecumseh part, sold individually. This hood latch can be used in lawn mowers and tractors. This hood latch is made out of durable plastic. The purpose of a hood latch is to affix to the upper and lower baggage chutes, keeping the components in place. A hood latch might have to be replaced within the standard lifespan of a lawn mower or a lawn tractor. It could suffer damage in the form of puncturing, piercing, or erosion of the plastic material as a result of general wear and tear over long-term usage or from a direct impact. If the hood latch can no longer be affixed in its usual placement, it should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This Hood latch is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

Replacement screw for riding mowers and tractors. Used throughout the machine for securing components. Replace if lost, stripped, or damaged from wear.

Replacement carriage bolt for lawn tractor infrastructure and frame assembly. Replace if bolt is missing, damaged, or stripped during maintenance or repair.

Hex nut secures components together with a bolt on riding mowers and tractors. Replace if stripped, rusted, or missing to restore proper assembly.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This weld nut is used for lawn mowers, tillers, and tractors to hold certain components together for high durability. These nuts can be found on various parts of lawn equipment and are distinguished by a small hole in the middle and a glossy golden color. Unlike typical nuts, they cannot be added or removed using a hammer or screwdriver. Sometimes a weld nut can become damaged through use, while other times one of them can go missing. Operating machinery with a missing weld nut can be dangerous since parts aren't held together as tightly as expected. In some cases, the weld nut can become rusty and will need to be replaced. If the weld nut is still in place, an angle grinder can be used to remove it. The nut can be replaced through two different welding techniques including projective or capacitive discharge welding. This weld nut is designed for use in many lawn mowers, tillers, and lawn tractors by Weed Eater, Husqvarna, Craftsman, and Poulan. It is a genuine OEM component that comes as an individual part directly from the manufacturer. Welding equipment and other basic tools will be needed to replace this weld nut on lawn and garden equipment.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

Replace worn, missing, or damaged washers in your riding mower. This small fastening component reduces friction between parts during operation.

Fix mower electrical issues with this engine wire harness. Restores connections between ignition, battery, and engine components on riding mowers.