Parts for Husqvarna 96730360100: Mower Deck / Cutting Deck Parts

Replacement deck belt for riding mowers. Connects rotating shafts to ensure smooth cutting performance. Replace if worn, cracked, or slipping. Verify fit with your model number before ordering.

This 16.25 inch-long blade is manufactured for use with lawn mowers, lawn tractors, zero-turn mowers, and riding mowers. It is a genuine Husqvarna part. The blade is a crucial component of the mower. It is the part that actually cuts grass. It is normal for the blade to become dull over time. They can be sharpened, but replacing will yield better results.Before replacing the blade on a mower, allow the engine to cool, empty the fuel tank, and disconnect the spark plug for safety. Wear work gloves to protect the hands. Tip the lawnmower onto its handle assembly or side. Use a socket to remove the nuts or bolts that attach the blade to the mower. Replace with the new blade and torque the nuts and bolts.This blade is a genuine OEM part sourced directly from the manufacturer. It is sold individually, and most mowers have only one cutting blade. It is manufactured to be compatible with several models made by Dixon, Husqvarna, and Jonsered.

Deck spindle assembly for riding mowers and lawn tractors. Mounts under the mower deck to hold and spin cutting blades. Replace if cracked, bent, or worn.

Replacement discharge chute for riding mowers and lawn tractors. Directs grass clippings away from the mower deck. Replace if cracked, broken, or missing.

Idler bushing for riding mower deck pulleys. Replace when worn to prevent excessive play and belt slippage. Verify fit with your model number.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

This is a spring that attaches to the deck lift shaft on a riding lawn tractor, providing the tension needed to raise and lower the mower deck smoothly. It assists the lift mechanism so the operator can easily adjust cutting height. Replace this spring if the mower deck is difficult to raise, won't stay at the selected height, or if the spring is visibly stretched, broken, or missing.

48-inch mower deck confinement plate for riding mowers and tractors. Replaces cracked, broken, or missing confinement plates on 48-inch cutting decks.

Belt guide for riding mowers keeps drive belts aligned and prevents slippage. Replace if worn, cracked, or belts slip off frequently. Verify fit with your mower's model number before ordering.

Grease fitting zerk for riding mowers and tractors. Installs at pivot points and bearings. Replace when damaged, stripped, or missing threads prevent lubrication.

Clevis pin for riding mowers and lawn tractors. Secures linkage connections in steering, brake, or transmission systems. Replace if bent or missing.

Hair pin fastener for riding mowers and tractors. Secures components in place throughout the machine. Replace if bent, broken, or missing.

Shoulder bolt secures the gauge wheel on riding mowers and tractors. Replace if worn, loose, or missing to properly mount the wheel roller assembly.

Socket head cap screw for riding mowers and lawn tractors. Secures components throughout the machine. Replace when stripped, missing, or damaged.

Secures the mower blade to the spindle on riding mowers and tractors. Replace if bolt is stripped, washer is damaged, or hardware is missing.

Bolt for riding mower tractors. Secures components and parts throughout the mower assembly. Replace if missing, stripped, or corroded for safe operation.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Prevents parts from loosening due to vibration on your riding mower. This nyloc lock nut uses a nylon collar insert to resist backing off during operation.

Replace a loose or missing flange nut that secures mower components. This top lock nut provides secure fastening for riding mower and tractor assemblies.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

Flange nut secures critical components on riding mowers and tractors. Prevents loosening from vibration. Simple hand-tool installation in minutes.

Hex nut secures components together with a bolt on riding mowers and tractors. Replace if stripped, rusted, or missing to restore proper assembly.

Fix mower electrical issues with this engine wire harness. Restores connections between ignition, battery, and engine components on riding mowers.