Parts for Kitchenaid KSDG950ESS3: Blower Parts

The Filter is an OEM part for Whirlpool ranges. Installed at the base of the downdraft vent opening, this filter works to capture grease, smoke and odor particles emitted during cooking.

Causes of a bad filter can include natural saturation over many uses as it accumulates grease residue. Extremely high-heat or splattering cooking methods may also accelerate the clogging process.

Symptoms of an inefficient range downdraft filter include:

• Grease residue visible below the vent opening or on surrounding cabinetry
• Reduced effectiveness at extracting smoke, odors or steam from cooking surfaces
• Vent motor or fan starting to strain or make louder noises during use

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This small mounting clip secures panels or components in place to help prevent rattles and movement during operation. It provides a simple, low-cost way to restore proper fit and reduce noise from loose parts. What it does:

• Holds trim, panels or wiring harnesses in position to prevent shifting
• Helps stop rattling or vibration caused by loose components
• Restores secure engagement where a broken or missing clip allowed gaps
• Commonly used where a small plastic or metal retainer is required to lock parts together

• One replacement clip as shown

• Turn off and unplug the appliance before starting any repair
• Inspect the mounting area to confirm clip orientation before installing
• Push or snap the clip into place; use hand tools only if needed to avoid damage
• Replace any adjoining fasteners or retainers that are worn

The Scroll Fan is an OEM part for Whirlpool ranges. Located inside the rear cavity, this fan draws hot air away from electronics preventing overheating. It then circulates air evenly throughout the oven cavity during baking and broiling.

Symptoms of a failing scroll fan include:

• Inefficient or uneven cooking even at correct temperatures  
• Error codes relating to over-temperature sensors
• Burning smell coming from electronic control areas

Causes can be worn bearings, and buildup of grime on fan blades restricting air flow over time. Without proper ventilation, heat damage to components may occur. Replacing with this new OEM fan restores optimal airflow and cooling. Consistent heat circulation ensures food is cooked perfectly every time with your Whirlpool range.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Hardware Kit is an OEM part for Whirlpool ranges. This comprehensive kit includes all mounting screws and clips necessary for properly securing multiple internal components.  

The precise hardware pieces maintain and reinforce structural connections between panels, drawers, doors, and electronic assemblies throughout daily use. Corrosion-resistant coatings ensure stability over time.

Causes of damaged or missing hardware include normal wear from repeated installation/removal of panels during repairs or self-maintenance. Improper installation techniques could also stress components.

Symptoms of insufficient hardware include: 

• Gaps emerging between assembled surfaces
• Rattling noises from loose parts  
• Doors or drawers becoming misaligned  
• Interior panels unable to properly support weight

Also compatible with some Maytag, KitchenAid, Jenn-Air, and Kenmore ranges and ovens. 

The Blower Motor is an OEM part for Whirlpool ranges. It is an electronic component located underneath the range that is responsible for removing heat, smoke, and odors from the kitchen. The down draft blower motor operates an exhaust system that draws air through a vent behind the cooking surface and vents it outside.

Causes of a bad down draft blower motor can include normal wear and tear over time, exposure to grease or debris which can cause clogs or mechanical issues.

Symptoms of a faulty down draft blower motor include:

• Inadequate ventilation of heat, smoke or odors from cooking
• Slow or delayed venting of the cooking area
• Loud buzzing or grinding noises coming from underneath the range
• Failure of the venting system to turn on

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Capacitor is an OEM part for Whirlpool electric ranges. It is an essential electrical component that regulates power delivery to internal heating elements and circuits. 

Symptoms of a bad capacitor typically include inconsistent or intermittent heating responses, uneven cooking surface temperatures, and error codes that point to irregular power supply.

Causes of a bad capacitor can be exposure to high heat over extended periods that degrade insulation and performance over time. Physical damage from impact during cleaning may also crack external casings.

Symptoms of a bad capacitor include:

• Inability to maintain selected temperature settings  
• One or more elements or surfaces that do not heat at all
• Circuit breakers that trip unexpectedly

This exact Whirlpool replacement ensures optimized power regulation for dependable cooking. Compatible with brands including KitchenAid, Jenn-Air, and select Kenmore models. 

This replacement air plenum directs and channels appliance airflow for proper venting and temperature control. It restores correct air routing to help maintain performance and prevent heat buildup in the appliance. What it does:

• Channels exhaust or recirculated air from the blower to the vent or heating chamber
• Helps maintain consistent airflow to support proper drying/heating performance
• Can reduce airflow restrictions that cause long cycles or uneven results
• Reduce unusual noises caused by damaged or disconnected ducts

• One air plenum

• Disconnect power (and gas, if applicable) before beginning service
• Access typically requires removing exterior/back panels; follow the OEM service manual
• Handle plastic pieces gently to avoid cracking; use original fasteners or OEM replacements
• Inspect and replace seals or gaskets as needed for proper fit and leak prevention