Parts for Electrolux E36GF76TPSA: Body Parts

Mounting screw for gas ranges. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during appliance service.

Replacement oven rack assembly for gas ranges. Installs inside the oven cavity to support cookware. Order when your existing rack is bent, warped, or damaged.

This control panel is the outer console that houses the oven/range user interface and protects internal controls. It restores the appliance's front appearance and provides a stable mounting surface for buttons, displays, and switches. What it does

• Replaces a cracked, faded, or warped front console to restore the appliance's appearance
• Provides the mounting surface and openings for the control keypad, display, and selector switches
• Helps protect internal electronic components from spills and debris
• Can stop erratic input caused by damaged or loose panel areas around buttons

• One control panel (outer/console) as shown

• Installation requires removing the range/oven console trim and disconnecting power before starting
• Handle with care to avoid scratching the finish; align mounting tabs and secure with factory screws
• Ensure connectors are reattached correctly before restoring power

Oven broiler pan catches drippings and supports food during broiling. Replace this pan if yours is warped, damaged, or missing for safe cooking and easier cleanup.

Broiler pan insert sits under the broiler burner to catch drips and grease. Replace if cracked, warped, or heavily stained for cleaner broiling.

Oven not responding to buttons or features won't activate? This control switch restores reliable operation by opening and closing electrical circuits.

Mounting bracket secures range components to the cabinet or frame. Replace if bracket is bent, cracked, or broken to restore proper alignment and support.

Replace your range oven door seal to maintain heat efficiency and prevent energy loss. Essential when you notice gaps, cracks, or heat escaping. Verify fit.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

This refrigerator door gasket creates a tight seal around the door edge to help maintain proper temperature and energy efficiency. It replaces a worn or torn seal to reduce warm air leaks and improve cooling performance. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and uneven temperatures inside the compartment
• Reduces compressor run-time caused by air leaks
• Common symptom: warped, cracked, or compressed gasket that no longer seals

• One refrigerator door gasket

• Inspect door edge and mounting channel; clean before installing the new gasket
• Gasket may need to be warmed or eased into the channel for a snug fit
• If the door is misaligned or hinge issues exist, address them before gasket replacement
• Turn off power to the appliance or disconnect before doing any repairs; wear work gloves to avoid sharp edges

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

Replacement power cord for ovens and ranges. Installs at the rear panel to restore electrical connection. Needed when original cord is frayed or damaged.

This replacement cabinet insulation helps reduce heat transfer into the refrigerator cavity so cooling components run efficiently and food stays colder. It restores proper thermal barrier and helps control frost and compressor run-time. What it does:

• Replaces worn or damaged foam insulation behind the interior liner
• Restores the refrigerator's thermal barrier to improve cooling consistency
• Helps reduce frost buildup and excessive compressor cycling caused by poor insulation
• Supports sealed-system efficiency by minimizing unwanted heat gain

• Install behind the interior liner or in the cabinet cavity as original; follow OEM location and orientation
• Use proper personal protective equipment when handling insulation (gloves, eye protection)
• Avoid compressing or tearing the foam during installation to maintain thermal performance
• For best results, inspect surrounding seals and fasteners and replace any damaged components

Oven not heating evenly or fan not running? This convection fan motor circulates hot air for consistent baking. Direct-fit part for most repairs.

This trim is a decorative finishing piece that restores the appearance of the appliance and covers gaps around the opening for a clean, factory look. It replaces damaged, scratched, or worn trim to refresh the unit's exterior. What it does:

• Covers and protects the edge of the appliance opening for a finished appearance
• Hides mounting hardware and gaps where panels meet
• Helps prevent dirt and moisture from collecting in the exposed edge area
• Restores a worn, chipped, or scratched exterior surface

• Basic hand tools may be required; follow OEM instructions for removal and replacement
• Inspect adjoining panels and fasteners for damage before installing new trim
• Handle trim carefully to avoid scratching the finish during installation
• Disconnect power to the appliance if working near electrical components or controls

Replace a cracked, broken, or missing access panel cover on your range or oven. Secures internal components, restores finished appearance, and shields wiring.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

Securing nut for ovens and ranges. Holds interior components like convection fans in place. Replace if stripped, damaged, or missing during repair.

If your range cooling fan won't turn on or runs constantly, the cooling fan thermostat may have failed. Requires cooktop disassembly to replace.

Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.

Reinforces and supports oven door glass panels. Replace if original stiffener is bent, cracked, or missing to properly secure glass in the door frame.

Oven not heating evenly or reaching temperature? This bake heating element restores radiant heat for consistent baking and roasting. Direct replacement.

Replace your worn or missing range spacer to restore proper component alignment and spacing. This small plastic part maintains correct clearances inside the unit.

Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.

Replacement 10-24 x 5/8 screw for securing panels, brackets, and trim on ranges and ovens. Needed when original hardware is stripped, missing, or worn.

Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

8-18 x 0.500 mounting screw for appliances. Secures panels, brackets, and components. Replace if stripped, missing, or damaged during repairs.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.