Parts for Frigidaire BFEF374JIS1: Body Parts

Screw that adjusts and secures the leveling leg to your range base or bracket. Replace if stripped, bent, or missing to restore stable footing and level your appliance.

This is a metal wire rack designed to slide into the oven cavity on interior supports. It provides a flat, heat-resistant surface for holding cookware and baking sheets during cooking. Replace this rack if it is warped, rusted, has broken or bent wires, or no longer slides smoothly on the oven guides.

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Broiler Pan Assembly is an OEM part for Frigidaire ranges and ovens. This part includes both the broiler pan and the grill rack, designed to catch drippings and promote even cooking when broiling foods.  This assembly includes pan and insert.

Causes of a bad broiler pan assembly can include wear and tear from regular use, warping or rusting due to high temperatures, or damage from improper cleaning methods.  

Symptoms of a bad Broiler Pan Assembly include:

• Visible warping or rust on the pan or rack
• Difficulty in cleaning due to persistent stains or damage
• Uneven cooking results when broiling
• The pan or rack no longer fitting securely in the oven

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Fix F10 error codes and inconsistent oven temperatures with this sensor probe. Monitors internal temp for accurate cooking. Moderate DIY repair.

This access cover is the service panel that protects and conceals internal components, giving a clean exterior and allowing access when maintenance is needed. It helps keep dust, debris and small objects out of the appliance. What it does

• Covers the service or access opening to protect wiring, controls and other internal parts
• Prevents debris, pests and accidental contact with internal components
• Reduces drafts, rattling or noise from unsecured openings
• Provides an official replacement for worn, cracked or missing panels

• Disconnect power (and water if applicable) before removing or installing the cover
• Use appropriate screwdrivers or fasteners; retain existing screws unless replacement screws are supplied
• Handle edges carefully; metal panels can have sharp edges

Insulation blanket that wraps around the oven cavity to retain heat and reduce exterior surface temperatures. Replace if torn, compressed, or missing.

Insulates and cushions the oven cabinet interior. Replace if cracked, damaged, or missing to restore thermal separation and reduce condensation.

This oven vent tube routes hot air and fumes from the oven cavity to the exterior vent path, helping maintain proper oven airflow and reducing heat buildup behind the range. Replaces a damaged or disconnected vent tube to restore safe exhaust flow. What it does:

• Channels combustion and cooking exhaust from the oven cavity to the rear vent path
• Prevents heat and fumes from collecting behind or under the range
• Helps reduce lingering smoke or odors after baking or broiling
• Restores a sealed exhaust path when the original tube is cracked, crushed, or detached

• Installation requires access to the rear of the range or removal of the oven rear panel; refer to your service manual for steps
• Ensure the tube is fully seated and secured to prevent exhaust leaks
• Disconnect power at the breaker before any service to avoid shock risk

Broiler not heating or turning red? This broil element restores high-heat broiling. DIY-friendly repair, typically takes 10-15 minutes with basic tools.

If your oven won't heat or bakes unevenly, the bake element may be burned out. This is a simple 5-10 minute repair—just two screws and wire connectors.

Secures cooktop surface elements to your range for stable contact and even heating. Replace if bent or worn to restore proper element positioning.

Adapter assembly for oven vent system. Installs in back wall to align vent components. Replace if cracked, broken, or missing to restore proper fit.

Rubber or plastic bushing that cushions and supports the oven door. Replace if cracked, worn, missing, or causing door misalignment or rattling.

Replace your oven's broken or missing rack spring. This small metal spring helps support and stabilize oven racks during sliding and positioning.

Mounting bracket for your oven. Installs to secure components or panels in place. Replace if bent, broken, or missing to restore proper fit and stability.

This mounting bracket secures internal appliance components to keep them aligned and stable during operation, helping prevent excessive vibration and wear. Use it to restore proper fit and support where the original bracket is bent, broken, or missing. What it does:

• Provides a secure attachment point for panels, assemblies, or hardware inside the appliance
• Prevents shifting or sagging that can cause rattle, vibration, or misalignment
• Replaces cracked or deformed brackets that may allow components to move out of position
• Helps maintain proper clearances so affected functions operate as designed

• One mounting bracket

• Measure and compare the part to the original before installation to confirm form and fit
• Disconnect power and, if applicable, water supply before servicing the appliance
• Handle sharp edges carefully and use proper tools to avoid damage to the bracket or surrounding parts

This is an authentic OEM replacement bracket locking screw sourced directly from the manufacturer for use on range tops. The stovetop bracket is attached to the stovetop and the stove body. This locking screw is a fully threaded 2.1-inch screw. If this screw becomes loose or rusted, it should be removed and replaced to ensure the stovetop remains fully seated and in good working condition. If the screw is missing, the stovetop bracket will not be fully functional, and the stovetop could become loose. To start, disconnect the power and gas from the unit before replacing the screw on the bracket. Make certain the stove burners are not hot. Remove the burner grates, burner caps, and control knobs. Lift the range top cover. Locate the mounting bracket on the wall unit. If the screw is in the bracket but has rusted, use a screwdriver to remove the missing screw. Set the nut aside for use on the new screw. Install the new screw and the nut from the last screw. Check the bracket alignment before tightening the screw. Tighten the screw to the nut. Lower the stovetop and reconnect the power and gas. This bracket locking screw is a heavy-duty 2.1-inch silver metal screw. It is designed for use on gas ranges manufactured by Frigidaire, Kenmore, Electrolux, and Crosley.

This is a replacement timer instruction label that restores the control panel markings so you can read and use the timer functions clearly. It helps make settings easier to understand and reduces user confusion. What it does:

• Replaces a faded, damaged or missing timer instruction label on the appliance control panel
• Restores printed timer markings and simple usage directions for the timer/controls
• Improves visibility of settings to reduce incorrect selections
• Designed to match the original label layout and wording

• Clean and dry the mounting surface before applying for best adhesion.
• Peel-and-stick style; align carefully before pressing into place.
• For labels that require adhesive removal or panel disassembly, consider using appropriate tools and follow safety precautions.
• Not an electrical component; disconnect power only.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, and components. Order a new screw if yours is stripped, missing, or damaged.

Oval-head square-drive screw secures interior and exterior oven panels, brackets, and trim. Replace worn, stripped, or missing screws for secure assembly.

Replacement mounting screw for refrigerators, ovens, ranges, and cooktops. Secures interior panels, components, and trim. Needed when original is stripped, missing, or damaged during repair.

Replacement 10-24 x 5/8 screw for securing panels, brackets, and trim on ranges and ovens. Needed when original hardware is stripped, missing, or worn.

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation