Parts for Frigidaire PCFD3668AFA: Body Parts

This heating element is the oven bake element that provides steady heat for baking and roasting so your oven reaches and maintains cooking temperatures. It restores proper oven heating and even browning when the bake circuit is at fault. What it does

• Heats the oven cavity during bake cycles to cook food evenly.
• Replaces a burned, visibly damaged, or non-heating bake element.
• Common symptom: oven won't reach set temperature or food undercooks during bake.
• Works with ovens that use a separate bake element (rear/lower cavity).

• One oven bake heating element (single piece as shown)

• Disconnect power at the breaker before servicing—this part is energized by mains voltage.
• Handle carefully; element terminals and insulation can be damaged by rough handling.
• Requires basic disassembly of the oven interior and removal of mounting screws; save removed screws for reinstallation.

This is a replacement nut that secures appliance components in place to maintain reliable operation and safe performance. It provides a simple, durable fastening solution for compatible Frigidaire assemblies. What it does:

• Fastens and secures panels, brackets, or components to prevent loosening and vibration
• Helps maintain proper alignment of assemblies for consistent performance
• Reduces rattling or movement that can cause noise or wear
• Works with the matching bolt/stud to create a secure connection

• One replacement nut

• Verify the nut matches the original part before installation
• Use appropriate tools and torque to avoid stripping or over-tightening
• Disconnect power to the appliance before accessing internal components

This genuine replacement bake element restores oven heating so you can cook and bake evenly. It mounts at the back of the oven cavity and heats when the range calls for bake operation. What it does:

• Heats the oven cavity for baking and roasting cycles
• Restores even cooking when the oven fails to reach or hold set temperature
• Replaces a visibly burned, broken, or non-glowing element
• Helps eliminate undercooked or unevenly browned food when the element was faulty

• Disconnect power (unplug or switch off circuit breaker) before starting work
• Handle element carefully to avoid bending or damaging terminals
• Verify fit and terminal orientation before fastening; some models require removing the oven floor or inner panel

This mechanical temperature control thermostat replaces the fridge's temperature-sensing switch to help regulate cooling cycles and maintain a consistent internal temperature. Restores proper cycling when the thermostat is the cause of temperature issues. What it does:

• Senses cabinet temperature and opens/closes the circuit to the compressor or evaporator fan to regulate cooling.
• Helps stop continuous running or repeated short-cycling when the thermostat is malfunctioning.
• Commonly replaced when the fridge does not reach set temperature or temperature fluctuates unexpectedly.
• Works with mechanical control housings that use a capillary sensing bulb and remote sensor.

• One thermostat assembly (single thermostat with sensing capillary as shipped)

• Disconnect power to the appliance before starting any repair.
• Handle the capillary/sensing bulb gently — it is fragile and can be damaged by kinks or sharp bends.
• Access may require removing the control housing or interior panels; keep fasteners organized for reassembly.

A replacement temperature sensor probe (thermistor) that monitors interior temperatures so the refrigerator control can maintain correct cooling. Installs quickly and restores accurate temperature feedback for proper cycle control. What it does:

• Senses cabinet or evaporator temperature and sends readings to the control board
• Helps the refrigerator run appropriate cooling and defrost cycles
• Can cause incorrect temperature readings, excessive run time, or error codes when faulty
• Commonly used when the unit is warm inside or temperature fluctuates unexpectedly

• One temperature sensor probe (thermistor) assembly

• Disconnect power to the appliance before installing to avoid shock or damage
• Handle the probe and wiring gently; avoid sharp bends or pinching the sensor lead
• Secure the probe in the original mounting location and reconnect wiring firmly

This electronic control is the main oven control board that manages bake, broil and user interface functions so the range responds correctly to commands and heats to selected settings. Replaces a failed control to restore normal oven operation. What it does:

• Receives input from the keypad and display to run oven bake/broil cycles and timers
• Regulates oven temperature by sending signals to the heating elements and sensors
• Controls oven display and user interface feedback for settings and error indicators
• Helps prevent erratic cycling or lack of heat when the original control has failed

• One electronic control board

• Disconnect power to the appliance at the breaker before servicing to avoid shock
• Handle the control board and connectors carefully to prevent ESD or damage
• Verify part matches your model number and mounting before installation

This glider is the replacement drawer slide that helps a refrigerator or freezer drawer move smoothly and stay aligned. It restores stable drawer operation and reduces sticking, scraping, or uneven movement. What it does:

• Guides the drawer along its track so the drawer opens and closes evenly
• Prevents the drawer from binding, dropping, or catching on the cabinet
• Reduces noise and rough movement caused by worn or broken slides
• Helps keep stored items stable by maintaining proper drawer alignment

• Remove food and empty the drawer before starting; support the drawer during removal
• Use basic hand tools (screwdriver or nut driver) to remove and reinstall mounting hardware
• Inspect mating track and mounting clips for damage and replace if needed
• Follow all safety precautions; unplug the appliance or shut off power to models with integrated lighting or power features before working

This replacement mounting bracket secures internal refrigerator components to keep panels and assemblies aligned for reliable operation and quiet performance. It's a direct-fit support piece used where factory mounting points need reinforcement. What it does:

• Provides a secure mounting point to hold panels, assemblies, or components in place
• Prevents shifting or sagging that can cause rattling or misalignment
• Restores proper support after a broken or bent bracket
• Helps maintain correct spacing for connected parts to operate smoothly

• Disconnect power to the appliance before beginning any repair
• Remove any panels or covers that block access to the bracket using basic hand tools
• Keep track of mounting hardware; reuse original screws unless damaged

This spacer is a small mounting component that positions and secures adjacent appliance parts for proper alignment and clearance. It helps maintain even gaps and prevents panels, brackets, or assemblies from rubbing or shifting during use. What it does

• Provides a stable gap between panels or components to ensure correct alignment and operation
• Prevents metal-to-metal contact that can cause noise, wear, or vibration
• Keeps mounting hardware at the correct distance for secure fastening
• Helps maintain seal and fit where precise spacing is required

• One spacer

• Disconnect power before servicing the appliance to avoid shock or injury
• Remove panels or trim as needed to access the original spacer; keep track of fasteners
• Replace only the damaged or missing spacer with the same shape and thickness for proper fit

This replacement drip tray collects defrost and condensation water and directs it to the evaporator/evap pan to help prevent puddling under the appliance. Durable molded tray made to fit the fridge's drain path. What it does:

• Catches defrost and condensation runoff from the freezer/refrigerator
• Channels water to the evaporator/evaporation pan so it can safely evaporate
• Helps stop water pooling on the floor and under the unit
• Can reduce musty odors caused by standing water when installed correctly

• Unplug the appliance before servicing to avoid electrical shock
• Access usually requires removing the toe kick or lower access panel; handle clips/tabs carefully
• Clean surrounding area and drain path before installing to ensure proper water flow
• Inspect the drain tube and heater components