Parts for Roper 2453W0A: 02 - Body Parts

The Surface Element is an OEM part for Whirlpool ranges. This part provides heat to the cooking surface, allowing for the preparation of food. 

Common causes of a bad surface element include electrical faults, physical damage from heavy cookware, or degradation from constant heating and cooling cycles.

Symptoms of a bad surface element include:

• Inconsistent or uneven heating
• The element not heating up at all
• Visible damage such as burns or breaks in the coil
• Sparking or unusual noises when the element is turned on

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The 6 Inch Small Drip Pan is an OEM part for GE ranges and stovetops. It is designed to sit beneath the burner element to catch spills and drips that occur during cooking. This helps keep the stovetop clean and reduces the risk of burns and fire by preventing spills from coming into direct contact with the heating elements. For the 8-inch large drip bowl order WB32X106

Symptoms of a bad Drip Pan include:

• Rust or corrosion that can no longer be cleaned off
• Warping or changes in shape that prevent it from fitting properly under the burner
• Accumulation of stubborn residues that can't be removed, leading to smoke and odors during cooking

Common causes for replacing the drip pan include prolonged exposure to high heat which can cause discoloration and deformation, as well as accidental damage during cleaning or heavy use. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement screw secures appliance components so panels, brackets, and assemblies stay tight and aligned. Replace stripped or missing hardware to eliminate rattles and keep your unit assembled safely and correctly.

• Fastens panels, brackets, or components to the appliance frame
• Restores a secure fit when the original screw is lost, stripped, or corroded
• Helps prevent vibration noise and movement during operation
• Supports proper alignment of trim and assemblies

• Disconnect power; for gas units, also shut off the gas supply
• Use the correct driver to avoid stripping the head; do not overtighten
• Inspect and address damaged mating threads, clips, or brackets before reinstalling
• Refer to your model's parts diagram to confirm location and quantity

The Lower Dishwasher Rack Assembly is an OEM part for Whirlpool dishwashers. This part holds and organizes dishes, pots, and pans in the lower section of the dishwasher, ensuring they are properly positioned for effective cleaning.

Causes of a bad lower rack can include wear and tear from regular use, exposure to harsh detergents or high temperatures, and physical damage from heavy or improperly loaded items. 

Symptoms of a bad lower dishwasher rack assembly include:

• Rust or corrosion on the rack
• Broken or missing tines
• Difficulty sliding the rack in and out
• Poor arrangement of dishes, leading to ineffective cleaning

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Infinite Switch is an OEM part for Whirlpool cooktops and ranges, designed to control the temperature of the burners. This critical component allows for the precise adjustment of heat levels, providing the flexibility needed for various cooking tasks, from simmering sauces to boiling water. 

Causes of these symptoms can vary from electrical issues within the switch, such as faulty contacts or internal components, to physical damage from wear and tear or overheating. It's essential to address these issues promptly to maintain the safety and functionality of your cooktop or range.

Symptoms of a bad Infinite Switch include:

• Burners not heating to the set temperature
• Inability to adjust the heat level of the burner, resulting in it being stuck on high, low, or off
• The burner not turning on at all

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This mounting bracket secures the dishwasher door lock assembly to the door frame, keeping the latch aligned so the appliance can lock and start properly. It's a direct-fit replacement used when the original bracket is broken or bent. What it does:

• Holds the door lock/latch assembly in the correct position for reliable engagement
• Prevents door misalignment that can cause the washer to fail to start or display lock errors
• Restores stable mounting if the original bracket is cracked, warped, or missing
• Works with the factory door lock components and mounting hardware

• Disconnect power and water before starting any repair
• Access requires removing the inner door panel; keep screws and fasteners organized
• Inspect surrounding clips and fasteners; replace any damaged items for a secure fit

This main cooktop top panel replaces a worn, damaged, or discolored surface to restore a clean, secure mounting area for burners and components. It provides the finished surface that supports grates, burners, and burner caps. What it does:

• Replaces a cracked, dented, rusted, or heavily scratched cooktop surface to improve appearance and fit
• Supports burner heads, grates, and control openings so components sit securely
• Restores proper sealing and alignment for surface elements to reduce gaps and wobble
• Helps protect internal components from spills and debris that can cause corrosion or damage

• One main cooktop top panel (white) as shown

• Always disconnect electrical power and shut off gas supply before servicing the range
• Remove burner grates, caps, knobs, and fasteners to lift the old top; some panels require two people for safe handling
• Inspect and reuse or replace any mounting clips, screws, or gaskets as needed for proper fit
• Follow OEM service diagram for correct alignment; handle painted surfaces carefully to avoid scratches

This main top is the flat upper panel that covers and protects the appliance cabinet, restoring appearance and keeping internal components sealed from debris. It replaces a damaged, dented, or corroded top to improve safety and fit. What it does:

• Covers the appliance cabinet and provides a finished upper surface
• Protects internal components from dust, spills, and physical damage
• Restores proper alignment and panel fit for doors and controls
• Helps prevent moisture and debris from entering the cabinet

• One main top panel

• Disconnect power and any fuel lines before starting work
• Remove any controls, trim, or mounting screws holding the top in place
• Lift and position carefully to avoid scratching the finish and to align mounting points

This main top is the replacement cooktop surface in almond color that restores appearance and provides a secure mounting surface for burners and cookware. It's a direct-fit exterior top designed to match the original finish. What it does:

• Replaces a cracked, dented, chipped or badly scratched cooktop top to restore a uniform surface and appearance
• Provides stable mounting locations for burners, grates and control openings so components align correctly
• Covers internal components to help keep spills and debris away from wiring and controls
• Restores proper sealing and spacing where the top mates to the range frame to prevent gaps

• One main top (almond) as shown

• Disconnect power (and gas, if applicable) before starting work
• Remove grates, burners and control panel components first; support the range and work on a clean, flat surface
• Edges may be sharp—wear gloves and handle carefully

The Range Terminal Block Kit is an OEM replacement part for GE electric ranges. It contains screw terminals that connect internal wiring throughout the range. The terminal block facilitates safe and reliable power transfer between critical components such as the control panel, heating elements, timers, and temperature sensors.

Causes of a faulty terminal block can include normal wear over time loosening wire connections, water exposure leading to corrosion, or physical damage from force or impact.

Symptoms of a bad terminal block include:

• Intermittent or complete failure of bake, broil, or surface heating elements
• Fault codes or error messages related to electrical malfunctions
• Loose, frayed, or broken wire connections inside the range
• Components like the control panel or timers not operating correctly

This OEM GE part also fits Hotpoint, RCA, and Kenmore electric ranges.

The 8-inch large Surface Element is an OEM replacement part for Whirlpool induction ranges. It serves as an integral independent heating zone to boil, sauté or simmer large pots quickly.

Symptoms of a bad surface element include: 

• Inability to power on or heat evenly across the surface
• Slow inconsistent heating or hot/cold zones developing  
• Parts of the coil visibly cracked or disconnected
• Tripped circuit breakers upon heat-up that don't reset

Causes stem from normal thermal stress fatigue of coiled elements exceeding thousands of temperature cycles daily. Continuous high wattage energy may cause microscopic metal deterioration developing over a decade plus of use.

This genuine Whirlpool replacement part is compatible with Kenmore, Roper and Jenn-Air ranges.

For matching 6-inch element order WP660532.

The 8-Inch Large Drip Pan is an OEM part for GE ranges and cooktops. This drip pan is designed to sit beneath the heating element, catching any spills, drips, or overflow that occurs during cooking. It helps to protect the range from food debris and liquids, making cleaning easier and preventing damage to the stove's surface.

Symptoms of a failing Drip Pan include:

• Visible wear, rust, or corrosion on the pan
• Difficulty in fitting the pan securely beneath the heating element
• Accumulation of burnt food or discoloration that cannot be cleaned
• The pan becoming warped or damaged from high heat exposure

Causes of a bad drip pan can include regular wear and tear from frequent use, exposure to high temperatures, and spills from cooking. Over time, these factors can lead to rust, corrosion, and other forms of damage that necessitate replacement.

This OEM GE part is also compatible with some models from Hotpoint, RCA, and Kenmore.