Parts for Whirlpool 1525W1A: 05 - Body Parts

Replacement hex nut for dryer terminal blocks and electrical connections. Secures terminal components. Needed when original is stripped, missing, or damaged.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Replace a cracked, worn, or missing washer in your oven or range. This small metal component ensures secure fastening of internal parts and panels.

Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.

Burner not heating? This receptacle kit restores electrical connection to cooktop elements. Most DIYers complete this repair in under 30 minutes.

Range won't power on or burners not heating? The terminal block connects power to your range. Common repair for electrical connection issues.

This light insulation retainer secures the oven light assembly and surrounding insulation to keep the lamp stable and insulation in place for safe, efficient oven operation. It helps reduce light movement and prevents insulation from shifting. What it does

• Holds the oven light housing and adjacent insulation in the correct position
• Keeps insulation from sagging or falling into the cavity
• Prevents the light from rattling or becoming misaligned during use
• Helps maintain proper heat containment around the light area

• Disconnect power to the appliance and allow the oven to cool before servicing
• Remove the oven light cover and any access panels as needed to reach the retainer
• Use basic hand tools; handle the light bulb and glass cover carefully to avoid breakage

This replacement screw fastens panels, brackets, or trim inside your appliance. Swapping in a new screw restores a tight, secure fit and helps stop rattles, looseness, or misalignment caused by missing or damaged hardware.

• Secures panels, brackets, or trim to the appliance chassis
• Helps maintain proper alignment and spacing of components
• Replaces missing, rusted, or stripped hardware
• Helps resolve loose panels/handles, vibration, or rattling noises

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location; start threads by hand to avoid cross-threading
• Use the appropriate driver and tighten snugly without overtightening
• Inspect the mounting hole or clip for damage and address as needed before reassembly

Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.

Main bottom panel for electric ranges and wall ovens. Replaces cracked, damaged, or missing bottom chassis component. Structural support piece.

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

• Dimming or flickering light
• Complete lack of illumination inside the appliance
• Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

This oven back lining is the rear interior panel that restores the oven cavity surface and protects internal insulation and components. It helps maintain a clean, intact cooking cavity for safe, efficient operation. What it does:

• Replaces damaged, dented, or corroded rear cavity panel to restore a sealed oven interior
• Protects insulation, wiring, and rear-mounted components from heat and food debris
• Provides the mounting surface/support for rear elements and related hardware
• Helps maintain consistent cavity temperatures by covering the back wall

• One oven back lining

• Disconnect power (and gas if applicable) before beginning any service
• Remove oven racks, broil element (if applicable), and access panels to reach the back lining
• Handle panel edges with care—use gloves to avoid cuts and protect the oven finish
• Retain or replace any insulation, gaskets, or fasteners that were removed; follow OEM diagram for correct placement

Insulation panel for ovens and ranges. Installs between outer cabinet and cooking chamber. Replace if cracked, deteriorated, or missing for safety.

Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.

Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.

Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.

Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.

Replacement hex nut for dryer terminal blocks and electrical connections. Secures terminal components. Needed when original is stripped, missing, or damaged.