Bolens Chipper Shredder Parts

Flat washer for lawn mowers and outdoor power equipment. Replace if washer is missing, damaged, or corroded to ensure proper fastening and fit.

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

Shoulder screw for lawn tractors and mowers. Replace if the original is stripped, missing, or damaged. Secures components requiring precise spacing.

Needle bearing for lawn tractors and mowers. Replace when you notice unusual noise, vibration, or rough movement. Confirm fit with your model number.

Flange bearing for lawn tractors and walk-behind mowers. Replace if you notice excessive noise, vibration, or wheel wobble. Verify fit with your model number.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

Sealed ball bearing reduces friction between fixed parts and rotating shafts. Replace if you hear grinding noise or notice wheel wobble. Verify fit.

Rope won't retract or gets stuck when pulling? This recoil starter spring restores smooth pull-and-retract action on walk-behind mowers and tillers.

Push rod kit for small engines. Installs in the valve train assembly. Replace if rods are bent, damaged, or worn from normal engine operation.

Engine won't start or pull cord slips? This starter cup connects the recoil mechanism to start your engine. Simple bolt-on replacement part.

Seals and insulates the carburetor from engine heat on lawn mowers and outdoor power equipment. Replace if cracked, worn, or causing air leaks.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

If your snow blower won't self-propel or drive forward, a worn friction wheel assembly is often the cause. This drive system transfers power to the wheels.

Hex nut fastener for lawn tractors and riding mowers. Secures various components and assemblies. Replace if stripped, corroded, or missing.