Bolens Tiller Parts

This is a hand-operated siphon pump designed for transferring fluids such as oil, fuel, or other liquids in lawn and garden equipment. It allows you to easily drain or transfer fluids without tipping the equipment. Replace this pump if it is cracked, no longer creates suction, or leaks during use.

Left hand inner tines assembly for tillers. Installs next to outer tines on the left side. Replace if tines are worn, bent, or broken from soil cultivation work.

Outer tines for tillers that dig into soil for gardening. Replace when worn down, cracked, or broken from use. Durable metal construction for ground cultivation.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

Replacement compression spring for lawn tractors and riding mowers. Restores proper tension when original is broken, worn, or missing. Direct fit part.

Replacement flat washer for lawn tractors and outdoor power equipment. Install between fasteners to distribute load. Replace if lost, damaged, or worn.

Depth stake tube for front-tine tillers. Installs to measure tilling depth. Replace if bent, cracked, or missing for accurate depth control.

The gearbox assembly is found in tillers and is where the gears are housed that supply the drive and torque for the unit. The gearbox assembly is designed to provide protection for the gears and the other internal components, which are responsible for transferring energy to increase torque and control speed. Although it is made of durable materials, it may become worn or damaged over time and require a replacement. This genuine OEM gearbox assembly is produced to exact manufacturer standards and made to be used in compatible machines from Yard-Man, Ryobi, Yard Machines, Bolens, Cub Cadet, and MTD. The gearbox assembly is sold as an individual assembly and comes ready to install with the four screws required for installation. Be sure to wear gloves and disconnect the power from the tiller before performing any repairs. Allow the unit to cool completely and follow the diagram to ensure that the replacement part fits exactly. This assembly will require a screwdriver and wrench set to replace.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.

This replacement part is an o-ring. It is a genuine replacement part made by MTD. O-rings are small but are a very important part of many appliances. These rubber rings are placed around parts that have spaces in their vicinity. This blockage created by the O-ring allows gas and air to stay within the engine or appliance. Otherwise, it might escape and cause issues during use. A new o-ring might be needed if the current ones are missing or becoming thin. This is common in many appliances. If there is a noticeable amount of air or gas escaping the appliance then it might be caused by a gap where an o-ring should be. This o-ring is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM part sourced directly from the manufacturer.

Replacement ignition coil for front-tine tillers and cultivators. Installs on the engine to generate spark. Replace if cracked, damaged, or missing.

If your starter rope won't retract or recoil properly, the recoil starter pulley may be damaged. This pulley works with the recoil spring to retract the rope.