Bolens Tractor

This wheel assembly is a genuine MTD part. It is meant as a replacement wheel on several makes and models of lawn tractors. Replacing the wheel is a relatively simple process, though it may require some special equipment.This wheel assembly is a genuine OEM part sourced directly from the manufacturer and is sold individually. Lawn tractors obviously have more than one wheel. Even if the wheel was damaged in an accident, check the others for wear and tear. It is very common for worn-out wheels to be more prone to damage than newer ones. What is more, it can be unhealthy for the machine to operate on unequal wheels. It is normal for the wheels on a lawn tractor to need to be replaced over time.This wheel assembly is designed for compatibility with many models of lawn tractors manufactured by Bolens, Brute, Columbia, Huskee, Husky, MasterCut, Murray, MTD Gold, White Outdoor, Yard Machines, and Yard-Man. Since there are so many models that this wheel assembly may work with, use the compatibility checker before purchasing.

This replacement part is a lever shaft assembly. This lever is intended for use with lawn mowers and assists the user shifting to and from certain gears. If the lever itself is cracked or dented, it might not be able to function effectively.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This variable speed pulley assembly is a genuine MTD part, sold individually. This variable speed pulley assembly can be used as a replacement part in a lawn mower. The purpose of the variable speed pulley assembly in a lawn mower is to regulate and manage the desired speed of the shaft such that the lawn mower remains under the full control of the operator while in use.The variable speed pulley assembly might have to be replaced at some point within the typical lifespan of a lawn mower. This could occur if the variable speed pulley assembly has suffered from some form of irreparable damage during use, including puncturing, denting, cracking, chipping, warping, or eroding.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This variable speed pulley assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Troy-Bilt, and Huskee.

This replacement part is a bracket assembly. This is a genuine replacement part made by MTD. This part is able to connect different parts together. The bracket is sturdy and can hold pieces in place so that they stay secure during use. A new bracket assembly might be needed if the current one is visibly damaged or missing. This can include being cracked, dented, or bent. If this is the case, the user might not be able to adjust the bracket and it should be replaced as soon as possible. This repair should be simple and only require common household tools. Work gloves are also recommended if the user runs into trouble during the repair. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

This replacement part is a front axle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Front axles help control the wheel so that the user is able to ride straight on riding lawn mowers. This part ensures that the front wheels are stationed properly on the mower.A new front axle might be needed if the machine is not driving straight or the axle is not situated appropriately. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This replacement part is a shaft assembly. It is a genuine replacement part made by MTD. This part is responsible for helping the user control the gears and other functions in the machine.A new shaft assembly might be needed if the user notices that the current part is damaged in any way. If the shaft assembly is dented, cracked, or chipped, it might be a good idea to replace this part. If the user is unable to operate this part they might be unable to control the different gears in the machine. If this is the case it will not operate effectively. Be sure the engine is completely powered down before replacing this part. This shaft assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a bracket assembly. It is a genuine replacement part made by MTD. Bracket assemblies are commonly found in different types of machinery. This component helps connect moving and still parts so that the machine functions properly. This bracket assembly is made of durable metal.A new bracket assembly might be needed if the user can see that the current one is damaged or broken in any way including being dented or cracked. Because this bracket is essential in the operation of many lawnmowers, be sure to replace it right away when any damages occur or if it is unable to stay attached. Reference the appropriate user manual for more information on how to install this bracket assembly.This bracket assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer so that it fits.

This replacement part is a bracket assembly. This part is a genuine replacement part made by MTD. This part is commonly found in lawnmowers and is used to help connect many parts of the machine together. This bracket assembly ensures that parts are steady and secure during use. A new bracket assembly might be needed if the current one is visibly damaged such as being dented, bent, chipped, or cracked. This can be due to normal wear and tear after years of use. Be sure to refer to the correct owner's manual for more information about how to properly repair or replace this bracket assembly. Work gloves are also recommended to prevent injuries during the repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This specific part is a genuine OEM replacement part for long-lasting use.

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part lawn mowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers. The hex screw for one of these small engine outdoor appliances is used as a fastening component.The hex screw in a small engine outdoor appliance might have to be replaced if it is lost, misplaced, or damaged from general wear and tear with long-term use. If this occurs, the hex screw should be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

This screw is a genuine MTD part. A screw can be used as a replacement part in lawn mowers, snowblowers, tillers, chainsaws, log splitters, and wood chippers. The purpose of this genuine OEM part is to rotate and pierce into one or more components within the internal or external machinery of the appliance so that the stability of those components is maintained throughout general use of the appliance.The screw in an lawn equipment might need to be replaced if it has been lost, misplaced, or has suffered enough damage as to loosen the components that it is supposed to secure.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with equipment manufactured by MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

This hex washer screw is a genuine OEM replacement part for a variety of household and outdoor appliances. A hex washer screw is a self-piercing screw with an attached washer at the head of the screw. Self-piercing screws are quite sharp and feature a twin-lead thread to screw into a surface more effectively. The built-in hexagonal washer helps to balance weight and force throughout the connection and prevent breakage. Hex washer screws can become damaged over time through repeated stress or tension. Their threading can become stripped or the head can eventually snap off. Replacing a hex washer screw is simple as long as you have the right tool. The unique shape of the screw head makes it incompatible with a flathead or Phillips head screwdriver. Instead, replacing this type of screw requires a unique hex head screwdriver. This part is compatible with Yard Machines, MTD, Yard Man, Troy-Bilt, and Craftsman products and will fit lawn mowers, tractors, snowblowers, vacuums, and chippers. This is a high-quality replacement part sourced from the original manufacture and ships independently of any other hardware.