Bolens Tractor

This is a deck pulley that can work as a replacement for a range of lawn tractors. The pulley is used to help spin the blades on the tractor's mower deck. If the pulley has been damaged or is broken, the blades will not spin, which means the tractor can't cut the lawn. This will significantly reduce the functionality of the tractor.The deck pulley tends to be durable, but it could need to be replaced at some point. It might break, or it might become stripped. This could cause the belt to snap eventually. Replacing the part is essential. An impact driver and a 7/8 socket are needed to complete this project. Wait for the tractor to cool before starting a repair.This deck pulley can work with select models of lawn tractors from MTD, Troy-Bilt, Yard-Man, Yard Machines, and Bolens. The pulley is sold individually. This is an authentic OEM replacement deck pulley that has been sourced from the manufacturer.

This seat is a genuine MTD part, sold individually. This seat can be used as a replacement part for a lawn mower. The purpose of the seat is to provide a place on which the operator of the appliance can sit in order to comfortably operate the appliance without having to stand.The seat of a lawn mower might have to be replaced at some point within the standard lifespan of the appliance if it has been damaged. If the seat has been torn, ripped, punctured, or eroded to the point that it is no longer comfortable or cannot be sat on at all, the seat should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This seat is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This replacement part is a lawn mower seat, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This seat ensures comfort while mowing the lawn and allows the user to sit properly on the machine while in use.A new lawn mower seat may be needed if the current one is worn down or uncomfortable to sit in. It is possible that the seat covering can become torn or ripped. If this occurs it is recommended a replacement be ordered. To replace this part a screwdriver and a pair of pliers will likely be needed. Be sure to reference the specific owner's manual prior to starting a repair for this part. This seat is a genuine OEM replacement part and is sold individually. This part is sourced directly from the manufacturer to ensure proper fit on any appliance.

This replacement part is a deck skirt. This is a genuine replacement part made by MTD. This part is commonly found in lawn mowers and is responsible for keeping the middle part of the deck area clear of flying debris. A new deck skirt might be needed if the current one is missing or damaged in any way. This can include being dented, cracked, bent, or chipped. This part can experience this type of damage over time due to normal wear and tear. This repair should be simple and fairly quick. A screwdriver and possible pliers will be required and work gloves are recommended before beginning. This part is sold individually and is sourced directly from the manufacturer. This deck skirt is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This battery tray is a genuine Husqvarna part, sold individually. This battery tray can be used as a replacement part in a lawn mower. This part holds the battery in the mower.The battery tray could be dented, cracked, punctured, warped, or eroded, and may not be able to hold the battery safely in place. If this occurs, the battery tray should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This battery tray is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Ryobi, Yard Machines, and Bolens.

This part is a replacement battery tray. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective battery tray in outdoor power equipment.This battery tray secures the battery in place to ensure it doesn't become detached or broken during equipment use. This part will need to be replaced when no longer effective, such as if dented, bent, or corroded. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this battery tray, the appropriate owner's manual and equipment diagrams should be referred to. This battery tray is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a deck lift index bracket replacement for lawnmowers. The piece is used on mowers to help make it easier to adjust the height of the mower deck. This allows users to achieve different heights when cutting grass. The piece attaches to the upper frame of the mower. If it is not functioning properly, it will not be possible to change the height of the mower deck.The bracket is made from durable metal, but it could still have issues over time. Parts of the bracket could break or bend. there is also the chance that it could become corroded and could break. If this happens, it should be replaced as soon as possible. To replace the bracket, a wrench.This replacement deck lift index bracket is compatible with models of mowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, and Husky. It is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This genuine replacement part is a deck lift arm. The deck lift arm is the metal bracket that secures the mower deck to the lawnmower. If the mower deck is no longer being held up properly, and the grass is not being cut evenly due to the deck dragging on the ground, the deck lift arm will need to be replaced. Luckily, replacing this part is a fairly simple repair.To replace the deck lift arm, locate the bolts that attach it to the mower deck. Unfasten the bolts and remove the old lift arm. Place the new lift arm in its proper position and fasten the bolts that secure it to the mower deck.Power the mower and do a test trial to make sure everything is still functioning properly. If everything is normal, the installation was a success.This OEM replacement part is sold individually and is compatible with MTD brand lawnmowers.

This replacement part is a deck lift arm and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This deck lift arm is found in many types of lawn mowers and helps the user adjust the deck in many appliances. A new deck lift arm might be needed if the user notices that the current one is not working properly. It is not unusual for these parts to need replacing as they can become damaged or jammed after normal wear and tear. Be sure to wear work gloves when attempting to replace this part as injury can occur. Reference the specific user manual for more information on how to replace this part. This deck lift arm is a genuine OEM replacement part and sourced directly from the manufacturer. This specific deck lift arm is sold as a single piece and is made of durable metal.

This replacement part is a dash. This is a genuine replacement part made by MTD. This dash is found on lawn tractors and is able to protect the user from dangerous parts within the machine. Additionally, it protects the appliance from flying debris and other things that can damage the equipment. A new dash might be needed if the current one has become damaged. This can be caused by normal wear and tear with years of extended use, or a singular incident that may have caused an issue. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers if the current part is stuck in any way. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This is a quality muffler bracket that is made for use with lawn tractors and lawnmowers by several manufacturers. This part is located on the muffler and acts as a protective component to prevent damage to the muffler on the lawn and garden equipment. The muffler bracket is made of durable plastic but can be damaged or break. When this occurs, it will need to be replaced to ensure the muffler does not become damaged.When replacing the muffler bracket, a screwdriver and work gloves will be needed. Make sure the lawnmower is powered off and on a level surface before disconnecting the spark plug wire. This will ensure the process is safe and there is no chance of the tool powering on. The original muffler guard can be unscrewed from the tool before using the same screws to put the new component in place. Replace the spark plug wire before use.This muffler bracket is sold as a single part. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The part is made to be compatible with lawnmowers and lawn tractors created by MTD, Bolens, Yard Machines, Troy-Bilt, and Yard-Man.

This cap pulley is a genuine MTD part that is manufactured for compatibility with lawn tractors. On a lawn tractor, the cap pulley, or pulley cap, along with the idler arm and idler arm spring, create tension on the deck drive belt which allows it to operate.It is normal for this cap to become worn over time. It is a relatively easy repair, but the deck of the mower must be removed. One of the biggest signs of a problem with the pulley is a squealing sound, although there may be no signs that it is wearing out until it breaks completely.This cap pulley is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is manufactured for compatibility with lawn tractors made by Bolens, Craftsman, Columbia, Huskee, Husky, Mastercut, MTD Gold, Murray, Yard Machines, and Yard-Man.

This is a ferrule that can be used as a replacement part for repairing or adjusting compatible mowers. A ferrule is a fastener that can be used to join two pieces together and is typically connected with a cotter pin. It can be found in latch assemblies and variable speed pulley brackets. It is not to be confused with wire ferrules that are crimp wires.If this part becomes damaged or corroded, it should be replaced. The replacement process is simple. Wear gloves for safety. Make sure that the mower is off and cool before starting a replacement.The ferrule is for use with some models of mowers from MTD, Ryobi, Yard-Man, Troy-Bilt, Husky, Bolens, and Yard Machines. The piece is sold individually and is a genuine OEM replacement part.

This replacement part is a drive shaft assembly intended for use in lawn mowers. This is a genuine replacement part made by MTD. Drive shaft assemblies are an important part of all lawn mowers. This part is responsible for rotating the cutting blades on the appliance so that the user is able cut grass effectively and efficiently. A new drive shaft assembly might be needed if the user notices that the cutting blade is no longer turning, or is unable to start. If the cutting blade stops turning in the middle of using the appliance, the drive shaft might need replacing. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. Working gloves will be needed as this part is close to sharp blades.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This hex nut is a genuine MTD part, sold individually. This hex nut can be used as a replacement part in lawnmowers, snowblowers, tillers, string trimmers, leaf blowers, log splitters, and wood chippers. The purpose of a hex nut for one of these outdoor appliances is to serve as a fastening component in conjunction with a bolt so that two or more components are affixed to one another.The hex nut in an outdoor appliance might have to be replaced if the hex nut is lost, misplaced, or stripped from general wear and tear with long-term use. If the hex nut is damaged, the hex nut should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.