Bolens Tractor

This replacement part is a grip shift handle. It is intended for use in lawn mowers and allows the user to shift from the seated position. The grip shift reduces the amount of pressure the pedals experience. If the user cannot grip this part, it is best to replace it so that the machine can return to working order. If the user noticed that the equipment is unable to shift smoothly, the grip shift may have become worn down over time. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is an insulator plate. It is a genuine replacement part made by MTD. This small part is important to the overall operation of many different machines. It helps to insulate other parts inside the machine as well as allow them space to operate. A new insulator plate might be needed if the current one is missing or damaged in any way including being dented, cracked, chipped, or bent. This can be due to normal wear and tear as it is common that parts become broken overtime. Be sure to refer to the correct owner's manual before attempting to replace this part. This part is a genuine OEM replacement part. This insulator plate is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This replacement part is an extension spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. An extension spring, which can also sometimes be referred to as a tension spring, creates tension inside of the device and aids it in running smoothly and efficiently. A new extension spring might be needed if the user notices that the mower's engine is no longer working properly. If there are unusual noises coming from inside of the device, it's possible that the extension spring is malfunctioning. The spring can be stripped and snap over time. Always shut the engine down before attempting to replace any part of a lawn mower. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer. This spring is sold individually so be sure to purchase the proper amount.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective flat washer in a variety of outdoor power equipment. Washers are a standard piece of hardware with a wide variety of uses. They can be used with various equipment components to ensure they are secured properly together by providing a greater surface bearing area for screws and bolts. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several different models of line outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This deck wash plug is a genuine MTD part, sold individually. This deck wash plug can be used as a replacement part in a lawn mower. Functionally, the deck wash plug is a screw.The deck wash plug might need to be replaced if the small component is lost, misplaced, or stripped to the point that it cannot affix components to one another. If the deck wash plug is stripped from general wear and tear over long-term use, due to exposure to the elements, or after an accidental collision with a hard object, it should be removed and replaced by this genuine OEM replacement part. This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This deck wash plug is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Toro, Yard Machines, Yard Man, Huskee, Bolens, and MasterCut.

This tie rod is a genuine MTD part, sold individually. This tie rod can be used as a replacement part in a lawn mower. The purpose of the tie rod in a lawn mower is to seal and affix the steering rack to the steering arm.The tie rod in a lawn mower might go bad as a result of general wear and tear from long-term use or due to an accidental collision with a hard object. Symptoms of a damaged tie rod can include the reduced functionality of the steering mechanism, excessive noise when steering, or an unusual vibration from the steering wheel while in operation. If this occurs and the symptoms are directly the result of a bad tie rod, the tie rod should be removed and replaced with this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This tie rod is compatible with the following outdoor appliance brands: MTD, Ryobi, Huskee, Bolens, and Yard Machines.

This replacement part is an adjustable tie rod. It connects the lawn mower's steering rack to the steering arm. This allows the user to better maneuver the mower. If the mower is no longer steering as smoothly as it used to, the adjustable tie rod could be to blame. With extended use, the tie rod could wear down or break, outright. A visual inspection of this part can determine if it is damaged.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a rear stabilizer rod. This is a genuine replacement part made by MTD. This part is commonly found in different types of lawn mowers and is used to ensure the stability of the entire machine during use. A new rear stabilizer rod might be needed if the current one is not working properly. This can mean that the part is off balance and can no longer keep the machine stable. This can cause other issues down the line, so it is recommended that it be replaced right away. Be sure the engine is turned completely off before beginning this repair. Work gloves are also recommended when working closely to the engine. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective rod in lawn tractors.This rod is intended to help secure the lawn tractor's battery into position. If this rod is bent, dented, snapped, or rendered ineffective, the battery may become insecure, and the user may experience issues operating the equipment. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this rod, the appropriate owner's manual and equipment diagrams should be referred to. This rod is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawn tractor models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This deck lift handle is a genuine MTD part, sold individually. This deck lift handle can be used as a replacement part in a lawn mower. The purpose of the deck lift handle in a lawn mower is to manually adjust the leveling of the deck of the mower.The deck lift handle might need to be replaced if the component is sufficiently damaged to the point that the deck cannot be manually lifted to the proper level. If the deck lift handle has been scraped, cracked, dented, eroded, or otherwise damaged to the point that a basic repair cannot fix the component or restore its function, the deck lift handle should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This deck lift handle is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This part is a replacement brake rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective brake rod in a variety of lawn tractor models. The brake rod is an essential component of the equipment's overall braking mechanism. If this part is dented, bent, snapped, or otherwise broken, it can affect the user's ability to properly control the tractor and thus should be replaced. It's important when working on or near any mechanical equipment that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this brake rod, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this brake rod is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This part is a replacement shift rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can replace a broken or defective shift rod in ridden lawn mowers.The shift rod ensures the user can safely and comfortably shift the lawn mower gears. This part is essential to proper equipment usage and will need to be immediately replaced if detached, bent, snapped, or otherwise rendered ineffective. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular shift rod, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This shift rod can be used with a variety of ridden lawn mower models manufactured by MTD, Craftsman, Troy-Bilt, and other brands.