Bolens Tractor

This replacement part is a tire. It is a genuine replacement part made by MTD. These tires are commonly found in riding lawnmowers and assist the user in turning and maneuvering the machine to the desired locations.A new tire might be needed if the current ones are popped or leaking air. It is possible that over time the tires may lose traction and will need to be replaced. If one or two tires need replacing it is recommended that the user replaces all four tires to ensure consistency. This should be a quick repair and the user might need a screwdriver or pliers. This tire is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. This is a genuine OEM replacement part. Be sure to purchase the correct amount as most lawnmowers require more than one tire.

This tire is a genuine MTD part, sold individually. This tire can be used as a replacement part in a lawn mower.A mower tire might need to be replaced at some point within the typical lifespan of the appliance in the case that the tire or tread suffers damage that cannot be repaired. The tire could be punctured, cut, cracked, eroded, warped, or otherwise damaged over time from general wear and tear or as the result of an accidental collision with a sharp or hard object. If this occurs, the tire should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This tire is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This rubber foot pad is a genuine MTD part, sold individually. This rubber foot pad can be used as a replacement part in a lawnmower.The rubber foot pad in a lawnmower might have to be completely replaced if the part is lost, misplaced, or damaged to the point that it can no longer serve as a comfortable resting place for the feet of the operator. If the rubber foot pad is sufficiently damaged, it should be removed and replaced by this genuine OEM replacement part at some point within the typical lifespan of the lawnmower.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This rubber foot pad is compatible with the following outdoor appliance brands: MTD, Yard Machines, Yard-Man, Bolens, Troy-Bilt, and Husky.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective, damaged, or misplaced washer in a variety of outdoor power equipment.Washers are important in holding together equipment sufficiently as they increase the bearing surface of a screw, preventing it from sinking into surfaces and loosening over time. This washer is a standard piece of hardware and can be used in multiple different ways. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any work. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this washer is suitable for use on several different models of small engine power equipment including snow blowers and lawn tractors manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This genuine replacement part is a MTD flat washer flange sized .339 X .640 inch X .033 inch. This MTD flat metal washer flange has a variety of applications for many types of equipment including lawn mowers, snow blowers, tillers, edgers, and log splitters. Washers are important to the proper functioning of the product. They spread the load of a threaded fastener, such as a bolt or nut, or can be used as a spacer. However, they can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper operation. This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This MTD flat washer flange has multiple applications in a wide range of products from Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery, Wards, Bolens, Yard-Man, Turf King, MasterCut, and more. Please note: original part number 166763 is now obsolete, and manufacturer has replaced the original part number with this part.