Bosch Dishwasher Dishrack

The Tine Row Holder is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, it secures the tine row assembly in place to direct spray patterns.

Symptoms of a bad tine row holder include:

• Improper spray distribution inside the tub
• Loosening of the tine rows from their intended position  
• Visible cracks or damage to the holder's mounting points

Causes of failure may be normal wear over time or accidental impacts that compromise integrity. Mineral buildup could also affect its securing function.

This replacement holder is also compatible with Gaggenau and Thermador dishwashers.

The Tine Clip Kit is an OEM part for Bosch dishwashers. This kit includes clips that secure the tines in the dishwasher rack, ensuring that dishes stay in place during the washing cycle for optimal cleaning performance.

Causes of a bad tine clip can include wear and tear from regular use, exposure to high temperatures and detergents, or accidental damage. Faulty or broken tine clips can result in unstable tines, making it difficult to properly load and organize dishes in the dishwasher.

Symptoms of a bad Tine Clip include:

• Tines not standing upright or falling over
• Difficulty in loading or arranging dishes
• Rattling noises during the wash cycle
• Loose or missing clips

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Rack Flip Tine Clip is an OEM part for Bosch dishwashers.Its c-shaped design allows the flip tines to securely grip onto rolled edges of folding tines situated along inner walls of the dishrack. The clip maintains constant contact holding the rack firmly against potential movement.Used for the lower rack to hold one end of two flip tines. The tine clip measures just over an inch.

Causes of clip failure include breakage from repeated folding stresses or flexing over extended use. Material fatigue from long-term exposure to elevated temperatures in the wash chamber can also lead to cracking.

Symptoms of a failed rack flip tine clip include:

• Dislodged or unsteady upper racks during rotation
• Scattered dishes from lack of proper securement
• Blocked impeller wheel from sagging racks deforming wash patterns
• Scratches or damage to delicate items from rack movement

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Restore your dishwasher's top loading area with this upper dishrack. Replacing a damaged or rusted rack helps keep glasses, mugs, and small plates secure and properly positioned for smooth sliding and consistent wash coverage.

• Holds and organizes cups, glasses, bowls, and small plates on the upper level
• Slides along the upper rails for easy loading and unloading
• Maintains correct spacing for effective spray coverage and drying
• Common replacement for rusted wire, broken/missing tines, or a rack that falls off the rails or binds

• Turn off power at the breaker and let the dishwasher interior cool before servicing
• Open the door; release/flip the upper rail end caps or stops per your model
• Slide the old rack out; transfer any removable accessories if needed
• Slide the new rack into the rails and reinstall the stops; verify smooth travel

Color: gray. Each clip measures about an inch and each pack includes 2 clips.

Color: light gray. Measures about 3 inches high by 2 inches deep.

This holder secures a small appliance component in place to prevent movement and reduce noise and wear. It restores proper fit and helps keep connected lines and parts aligned for reliable operation. What it does

• Secures a hose, wire, or small assembly to the appliance frame to prevent rubbing or sagging
• Keeps components aligned to reduce vibration and rattling noises
• Helps maintain proper routing to avoid strain on connections
• Commonly replaced when loose, broken, or missing and causing movement or noise

• One holder

• Turn off power and, if applicable, water supply before starting work
• Inspect surrounding clips and fasteners; replace if damaged
• Install in the same orientation as the original; use proper fasteners if required

The Lower Dishrack Assembly is an OEM part for Bosch dishwashers. This assembly holds the dishes, utensils, and other items to be cleaned on the lower level of the dishwasher. It is designed to slide in and out smoothly, providing easy access for loading and unloading.

Over time, the lower dishrack can become worn out or damaged due to frequent use, exposure to high temperatures, and the weight of the items placed on it. Causes of a bad lower dishrack include broken or missing wheels, rust, and damage to the rack's frame or coating.

Symptoms of a bad lower dishrack include:

• Difficulty sliding the rack in and out
• Rust or corrosion on the rack
• Broken or missing tines
• Items not staying in place during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Regulator with o-ring.

A replacement flip tine for the dishwasher lower rack that restores folding rack supports so you can load dishes of different sizes. Bright silver finish matches common rack coatings for a discreet repair. What it does

• Replaces a single lower-rack flip tine used to fold down and support dishes, bowls and glasses.
• Restores the rack's ability to flip tines up or down for flexible loading.
• Helps stop dishes from shifting during the wash cycle when a tine is broken or missing.
• Fits into the lower rack's tine socket and functions with the existing rack hardware.

• One silver lower-rack flip tine (single piece).

• Slide or snap the tine into the lower rack tine socket until it seats; no special tools usually required.
• Inspect surrounding rack coating and mounting clip before installing; replace damaged clips or rack parts if needed.
• Handle edges carefully; wear gloves to avoid cuts on metal rack parts.
• Disconnect power to the appliance before doing any repairs that require more than simple hand installation.

This retaining clip secures small appliance components in place to prevent movement and ensure reliable part alignment. It provides a simple, durable hold that keeps assemblies stable during normal use and service. What it does:

• Holds panels, covers, or wiring harnesses in position to prevent rubbing or disconnection
• Maintains alignment of moving or attached components to reduce noise and wear
• Helps prevent intermittent electrical or mechanical failures caused by loose parts
• Commonly replaced when broken, cracked, or missing after service or impact

• One retaining clip

• Basic hand tools may be required; inspect surrounding parts before reassembly
• Wear gloves and power off and unplug the appliance before servicing
• Replace only with the correct OEM-designated clip to ensure fit and function

This adjuster socket is the replacement socket used with a cabinet/appliance leveling foot to adjust and stabilize the unit. It lets you raise or lower the appliance for a level installation and steadier operation. What it does:

• Engages the appliance leveling foot so you can turn and set the height
• Restores proper leveling to reduce rocking, uneven doors, and drainage issues
• Provides a secure interface between the leg and adjustment tool or nut
• Durable replacement for worn or damaged socket components

• One adjuster socket

• Turn power off and unplug the appliance before accessing leveling components
• Access may require tipping or partially removing the front grill or toe panel per your model's service manual
• Verify correct socket orientation and thread engagement before lowering appliance back to floor

The Adjustable Tine Row is an OEM part for Bosch dishwashers. It is designed to hold and secure dishes, allowing for optimal placement and cleaning efficiency. The adjustable feature allows users to customize the spacing of the tines to accommodate various dish sizes and shapes.

Over time, the adjustable tine row can become damaged or worn out due to repeated use or excessive force when adjusting the tines. This can lead to difficulties in securing dishes properly and may impact the overall performance of the dishwasher.

Symptoms of a bad adjustable tine row include:

• Tines that are bent or broken
• Difficulty in adjusting the tine positions
• Dishes not staying in place during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

The Bearing is an OEM component specifically designed for select Bosch dishwashers requiring stabilized rotational movement. As a friction-reducing fixture, it facilitates the smooth operation of assorted mechanisms.  

Precision-ground steel and reinforced polymer composite withstand harsh chemicals and high spinning velocities without excess heat or noise. Independent shielding maintains lubrication without contaminating surrounding compartments.

Causes requiring bearing replacement usually involve coolant deterioration building friction. Physical impacts may dislodge protective seals exposing components to intrusions no longer offering intended cushioning.

Symptoms signaling the need for a new bearing incorporate:

• Grinding or scraping noises emitting from moving joints
• Reduced cycle speeds from binding components  
• Excessive rotational resistance detected by diagnostics sensors

This OEM Bosch replacement bearing is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on long-lasting suspension elements. Proper installation restores noise-dampening characteristics throughout operational stresses.

Color: platinum gray. It measures about 2 inches wide by 2 inches high.

The Flip Tine Latch is an OEM part for Bosch dishwashers. It serves as a latching mechanism on upper dish racks that securely holds folded tines.

Made of durable plastic, the latch features offset hooks integrated along its base edge. These engage onto roll edges of individual flip up tines, pinning them neatly against the chamber to prevent unwanted movement.

Symptoms of a failed flip tine latch include:

• Sagging or unfolded flip tines potentially blocking spray jets
• Restricted water distribution due to improper rack orientation
• Scratched or misplaced dishes from unlatched tines potentially flailing
• Inefficient cleaning from lack of optimized spray coverage

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.