Bosch Dishwasher Handle

The Door Handle is an OEM replacement part for freestanding dishwashers. Ergonomically designed for comfort and grip, it allows convenient opening and closing of the dishwasher door. 

Causes of a bad door handle can include wear and tear from thousands of uses over a decade, exposing the handle's plastic material to damage from hot humidity escaping during cycles. 

Symptoms of a bad door handle include:

• Loose or awkward fit that makes operation difficult  
• Cracking or breaking of outer plastic casing
• Distortion preventing proper secure latching
• Misalignment causing shutting/opening issues

This genuine Bosch replacement handle is also compatible with Thermador, Gaggenau, and select Kenmore models.

The Handle Endcap is an OEM part for Bosch dishwashers. This component is designed to secure the end of the dishwasher handle, providing a finished look and ensuring the handle remains firmly attached. It plays a crucial role in the overall functionality and aesthetics of the dishwasher door.

You should replace this handle endcap if it becomes damaged or broken. Common causes of a bad handle endcap include regular wear and tear, accidental impact, or frequent use that leads to stress on the component.

Symptoms of a bad handle endcap include:

• Loose or wobbly handle
• Difficulty in opening or closing the dishwasher door
• Visible cracks or missing pieces on the endcap
• Handle not staying securely in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This part is stainless but also comes in different colors:

White: 00615350

Black: 00615353

Bisque: 00418631

The Detergent Cup Latch W Spring is an OEM part for Bosch dishwashers. This latch securely closes the detergent dispenser cup, containing detergent during the wash cycle.

Causes of a bad latch can include wear and fatigue of the latching spring over many uses.

Symptoms of a bad detergent cup latch include:

• The cup popping open unexpectedly during a wash
• Difficulty fully closing and hearing the "click" of the latch
• Detergent leakage resulting in reduced cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Latch is an OEM part for Bosch dishwashers. This part securely closes the dishwasher door, ensuring that it locks in place during operation. The latch mechanism works by engaging with the door strike, preventing the door from opening while the dishwasher runs, which is essential for both the safety and proper functioning of the appliance.  

Causes for replacement often include normal wear and tear from regular use, accidental damage, or a malfunction that prevents the door from securely latching.  

Symptoms of a bad Door Latch include:

• The dishwasher door doesn't stay shut or locks intermittently.
• The dishwasher fails to start due to the door not being recognized as properly closed.
• Visible signs of damage or wear on the latch mechanism.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Handle is an OEM component specifically designed for Bosch dishwashers. This handle allows for smooth, intuitive opening and closing of the dishwasher door. Over time, door handles can become worn, loose, or damaged through repeated use. The stress of opening and closing puts strain on this high-touch point. 

Causes of a faulty door handle include cracks, breaks or looseness caused by excessive force or impact. Normal wear and tear over thousands of uses can also degrade plastic and mechanics.

Symptoms of a bad door handle include:

• Difficulty opening or closing the door 
• The handle wobbling or coming loose from the assembly
• Cracks or splits in the plastic casing
• Improper alignment preventing full closure of the door seal

This part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Handle-Cap is an OEM part for Bosch dishwashers. It provides a contact point to open and access the dishwasher. As the cap wears through repeated use, it can impact usability.

Causes of a bad handle cap include typical wear over time. Harsh chemicals or impact can also damage this exterior part.

Symptoms of a bad handle cap are:

• Loose or improper fit that's uncomfortable
• Sharp edges or broken surfaces that could cut
• Discoloration or corrosion reducing aesthetic
• Difficulty opening the dishwasher door

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Includes door latch, strike plate and microswitch.

This door latch and strike plate secure the door closed and engage the safety interlock so the appliance can start and run reliably. Replacing a worn latch restores consistent door closure and prevents nuisance cycle interruptions.

• Locks the door by engaging the strike, keeping it closed during operation
• Ensures the door-closed interlock/microswitch is actuated so cycles can start
• Helps prevent the door from popping open mid-cycle
• Common symptoms: door won't latch or stay closed, unit won't start, cycle stops when the door is jostled

• Disconnect power before servicing
• Open the door and remove the inner-panel screws to access the latch area
• Remove the old latch/strike; align and install the new components
• If your model uses a separate microswitch, transfer/reuse it as required and test door engagement before reassembly

This stainless-steel dishwasher door handle replaces a worn or damaged handle and restores a clean, flush grip on the front of the dishwasher door. It provides a durable, easy-to-grasp surface for everyday use. What it does:

• Replaces the exterior door handle so you can open and close the dishwasher smoothly; common symptom is a loose, cracked, or broken handle.
• Restores the appliance's appearance by matching stainless finishes.
• Provides a secure, comfortable grip for normal operation.
• Mounts to the door with factory fastening points.

• Always disconnect power to the appliance before servicing.
• Installation typically requires removing the inner door panel or access cover; keep track of mounting hardware.
• Use the correct hand tools and avoid overtightening fasteners to prevent damage.

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Door Latch is an OEM part for Bosch dishwashers. This latch mechanism securely fastens the dishwasher door in the closed position during operation.

Causes of a bad door latch can include wear and loosening of moving parts over time and cycles, or damage to latch components from forced or excessive door openings.

Symptoms of a bad door latch include:

• The door not closing or latching properly
• Unexpected door openings during the wash cycle
• Reduced safety with an unstable door

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This black replacement door handle restores a dishwasher's exterior grip and appearance, letting the door open and close securely. It matches factory fit and finish for compatible Bosch dishwasher models. What it does:

• Replaces a cracked, broken or missing door handle to restore normal door opening
• Provides a solid grip for pulling the dishwasher door open and closed
• Restores the appliance's exterior appearance when the original handle is damaged
• Fits the factory handle mounting locations and aligns with the door trim

• One black door handle

• Disconnect power to the dishwasher before starting any repair
• Support the door while removing fasteners to prevent it from closing unexpectedly
• Remove interior door panel or trim as required to access handle screws or clips
• Use manufacturer service manual or OEM instructions for step-by-step removal and reassembly

This door latch cover is a direct-fit replacement trim piece that protects and conceals the dishwasher door latch assembly while restoring a finished appearance. Keeps the latch area tidy and helps ensure the door closes cleanly. What it does:

• Covers and protects the door latch mechanism from debris and wear
• Helps the door latch engage and the door sit flush when closed
• Restores the appliance's cosmetic finish around the latch area
• Can address symptoms such as a loose-looking latch area or an unsealed door edge

• Disconnect power to the appliance before installing; follow lockout/tagout practices
• Basic hand tools (screwdriver or trim tool) are typically required to remove the old cover
• Align the new cover over the latch assembly and snap or fasten into place per OEM diagram
• If the latch mechanism or strike is damaged, replace those parts as needed for full repair

This door handle replaces a worn or broken appliance door grip to restore a secure, comfortable surface for opening and closing. Designed to match the original fit and appearance for easy cosmetic repair. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or cosmetically damaged handles
• Restores proper leverage to reduce stress on the door latch and hinges
• Helps improve the look of the appliance by replacing a worn handle

• One door handle

• Refer to your appliance model's service manual for step-by-step removal and installation instructions
• Installation typically requires basic hand tools; disconnect power (and water if applicable) before servicing
• Handle may attach with screws or snap-fit clips—keep removed fasteners for re-use unless replacements are provided