Brute Parts

This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.

This fuel cap is a genuine MTD a part, sold individually. This fuel cap can be used as a replacement part for lawnmowers. This fuel cap protects the fuel line from accumulating external materials such as dirt, debris, and pebbles while the appliance is in operation. Additionally, the fuel cap prevents fuel from leaking out of the small engine of the lawnmower.The fuel cap might have to be replaced at some point in the standard lifespan if the component suffers damage that prevents it from functioning as a safeguard. Signs of damage include fuel leakages from the area of the fuel cap or the accumulation of external materials inside the engine of the lawnmower. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Cub Cadet, Yard Machines, Bolens, and Troy-Bilt.

This replacement part is a wheel assembly and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by MTD. Wheels are important parts to many types of equipment, including different types of lawn mowers. The wheels are what enable the appliance to move when in use.A new wheel might be needed if the current one is damaged or worn in any way. It is not unusual for wheels to become damaged overtime and therefore lose traction. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by MTD.

This grass catcher frame holds the grass-catching bag, which captures grass clippings for compost or simply to remove yard waste. Bagging rather than mulching allows grass to get higher and thicker without putting added stress on the mower. The internal grass catchers frame can become bent and not suitable for further use, making it impossible to bag clippings until it is replaced. This OEM replacement handle is the answer for mowers made by these manufacturers: Bolens, Murray, Mastercut, Troy-Bilt, Yard Machines, Craftsman, Yard-Man, and Cub Cadet. This OEM part is sold individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This part is a replacement nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or lost nut in outdoor power equipment.Nuts help to secure different equipment components together properly. They will need to be replaced if corroded, stripped, lost, or unable to properly fasten together parts. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this nut, the appropriate owner's manual and equipment diagrams should be referred to. This nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with outdoor power equipment that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This replacement part is a compression spring. This is a genuine replacement part made by MTD. Springs are found in different types of machinery and are responsible for returning other parts to their original position. On top of this, they are also meant to absorb energy so that the engine can operate smoothly. A new compression spring might be needed if the current one has been stretched out over time or snapped. This can happen as springs are typically put under a lot of pressure during use. If this is the case, be sure to replace it right away. Be sure to wear work gloves during this repair to ensure safety to the user and those around them. This is a genuine OEM replacement part which ensures proper fit. This compression spring is sold individually and is sourced directly from the manufacturer.

This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.

This is a genuine replacement bail bar that is designed for walk-behind lawn mowers. The bail bar is installed on the upper handle. The bar is engaged before the starter rope is pulled, allowing the engine to operate. This bar is responsible for stopping the mower's operation when released. Due to the repetitive motion and exposure to the elements, this bar can become worn or damaged and require a replacement. This part is also known as the blade control because it controls the engine power and blade rotation simultaneously. If the bail bar is broken or damaged, the engine and blade will not be able to stay engaged. A replacement will be necessary to continue using the mower. This OEM replacement bail bar is manufactured by MTD and designed to serve as an identical part replacement as what came with the machine. This metal handle is durable and sold as an individual unit. Additional parts and hardware will require a separate purchase. The part can be used with more than 150 models of lawn mowers from MTD, Bolens, Huskee, Yard Machines, and Yard Man. Always watch for pinch injuries when replacing pressure-held parts like this bail bar and wear gloves for hand protection.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

This chute deflector bracket is a genuine MTD part, sold individually. This chute deflector bracket can be used as a replacement part for a lawn mower. The purpose of the chute deflector bracket is to secure the placement of the chute deflector, which protects the operator of the lawn mower from flying external materials flung up by the appliance, including dirt, debris, and pebbles. The chute deflector bracket might have to be replaced in the event that it can no longer serve its vital function of maintaining the secure placement of the chute deflector of a lawn mower. This could occur if the component is coming loose. If this is the case, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This chute deflector bracket is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This is a genuine replacement shoulder screw that is compatible with select models of lawn tractors. The shoulder screw has multiple applications in lawn tractors, where it is typically used as some kind of axle for wheels or other components. Over time, this type of screw can become worn from repetitive motion or the threads can start to strip. If the screw fails or is unable to work effectively, it can affect whatever it is responsible for securing or holding, as well. This could result in the entire machine not working until a replacement is made. This is a genuine manufacturer's replacement manufactured by MTD. It is compatible with their lawn tractors as well as those from Yard Machines, Troy-Bilt, Yard Man, Husky, and Cub Cadet. The screw is made of durable metal and is sold as a single unit. This is considered specialty hardware and is also sometimes referred to as a shoulder bolt.