Parts for Bosch HGI8054UC/01: Burner & Control Panel Parts

Trim plate for gas ranges. Installs around burner or control area to provide a finished look. Replace if cracked, chipped, discolored, or missing.

Replaces cracked, chipped, or worn cooktop surface panel on gas ranges. Restores flat cooking surface and provides secure mounting for burners and grates.

Fix uneven flames or burner ignition issues with this cooktop burner cap. Distributes gas flame evenly and protects the burner head from spills.

Fix uneven flames or damaged burner tops with this gas range burner cap. Restores proper flame distribution. Easy DIY repair, takes 5 minutes.

Uneven flame or poor ignition? A damaged burner cap disrupts flame shape and heat distribution. This replacement cap restores even cooking and safety.

The Burner Head Screw is an OEM part for Bosch ranges and cooktops. It is specifically designed to securely fasten the burner head to the main cooktop. This screw ensures that the burner head remains properly aligned and stable, which is crucial for safe and effective cooking. 

Causes of burner head screw failure can include corrosion from spills and cleaning agents, stripping of the screw threads due to over-tightening, or general wear and tear from repeated removal and installation.

Symptoms of a bad screw include:

• A loose burner head that does not stay in place
• Unusual movement or rattling sounds from the burner during use
• Inconsistent flame or heating due to the misalignment of the burner head

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Replace your gas range burner to restore even flames and reliable ignition. Fixes hard-to-light, uneven, or yellow flames caused by warping or clogs. Confirm fit with your model number.

Restores even gas flow and reliable ignition on your cooktop. Replace if burners won't light, flame is uneven, or performance has declined. Confirm fit.

If your cooktop burner won't heat evenly or has visible cracks, this surface burner restores safe, efficient cooking. Direct replacement component.

Sheet panel for wall ovens and ranges. Installs inside the oven cavity as a structural component. Replace if cracked, damaged, or missing.

Fix a blank, flickering, or unresponsive oven display. This electronic control module restores touchpad function and temperature settings. DIY-friendly repair.

Replace your gas range front panel if it's cracked, discolored, or damaged. Restores the professional appearance and protects internal controls. Verify fit with your model number before ordering.

Mounting screw secures internal oven components and panels. Replace if stripped, missing, or damaged during service. Essential hardware for reassembly.

Mounting screw that secures panels and internal components in your range. Replace if screw is lost, stripped, or worn to restore secure fit and stop rattling.

This small rubber ring seals the gap between the control knob and the range surface, preventing spills and debris from entering the control mechanism. Replace when the gasket becomes cracked, torn, or missing, allowing liquids to seep behind the control panel or causing the knob to feel loose.

Cracked, stripped, or missing burner knob? This surface burner control knob restores heat adjustment on your gas range. Simple snap-on install.

Mounting screw secures internal oven components and panels. Replace if stripped, missing, or damaged during service. Essential hardware for reassembly.

Mounting screw for wall ovens and ranges. Secures panels, brackets, or components inside the oven cavity. Replace if missing, stripped, or damaged.

This cable harness routes electrical signals between dishwasher components to restore proper control and power delivery. It replaces a damaged or broken wiring assembly so affected circuits can communicate and operate reliably. What it does:

• Connects control board, sensors, pumps and other internal components to carry power and signals
• Restores intermittent or lost power to specific assemblies caused by frayed or broken wires
• Helps eliminate error codes or failures tied to open or shorted harness connections
• Prevents arcing and poor connections that can cause unreliable operation

• One cable harness assembly as pictured

• Only install after disconnecting power to the appliance to avoid shock or damage
• Inspect mating connectors and pins for corrosion or damage before connecting
• Route harness away from sharp edges, moving parts and hot surfaces to avoid future wear

Mounting screw for gas ranges and warming drawers. Secures components and panels in place. Replace if screw is stripped, missing, or broken.

Internal wiring cable for gas ranges. Connects electrical components inside your range. Replace if frayed, damaged, or broken to restore proper connections.

Fix intermittent power or electrical faults in your range with this cable harness. Routes power and signals between control and components. Direct fit.

Replacement mounting screw for ranges and wall ovens. Secures panels, brackets, and assemblies in place. Needed when original is lost, stripped, or damaged.

This is a set of gas orifice jets used to convert a gas range from one fuel type to another, such as from natural gas to liquid propane or vice versa. Each jet is precision-drilled to meter the correct amount of gas for proper burner flame size and efficiency. You will need this kit if you are switching your gas supply type and need to recalibrate your burners to prevent improper flame height, yellow flames, or sooting.