Parts for Kenmore 911.32259591 (91132259591, 911 32259591): Burner Section Parts

This threaded gas orifice controls the flow rate of gas to individual burners on your gas range. It ensures the correct gas-to-air mixture for proper flame size and cooking performance. Replace this orifice if burners produce yellow flames, won't stay lit, or burn too high or too low.

This small brass fitting controls the gas flow rate to your range burner for natural gas connections. It ensures proper flame size and heating performance for medium-output burners. Replace this part if your burner flame is too large, too small, or burns with a yellow color instead of blue.

This insulator protects and cushions the appliance control module, helping prevent electrical shorts and physical damage to the board. It's a simple replacement that supports reliable control operation. What it does:

• Separates the control/module from the chassis to prevent shorting and rubbing
• Cushions the module to reduce vibration-related connector issues
• Helps keep wiring and components positioned correctly for consistent electrical contact
• Can reduce intermittent control problems caused by loose or damaged insulation

• Disconnect power before beginning any repair to avoid shock or damage
• Access the control panel or console per your appliance's service instructions
• Fit the insulator under/around the module as shown in the parts diagram; ensure correct orientation and secure mounting hardware
• Avoid touching circuit board components; if connectors were removed, reseat firmly before reassembly

Gas pressure regulator for cooktops and ranges. Installs on the gas supply line to control flow to burners. Replace if cracked, leaking, or missing.

Fix a stuck burner valve or ignition issues with this cooktop gas valve. Simple DIY repair—unscrew the gas line nut, swap the valve, and retighten.

Fix burner flow issues, gas leaks, or uneven flames with this cooktop valve kit. Direct-fit assembly restores proper gas control. Moderate DIY repair.

The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently. 

Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time. 

Symptoms of a bad spark module include:

• Burners that will not ignite or only intermittently ignite 
• Flashback or burning above the burner head 
• The smell of gas when turning burners on

This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges. 

The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.

Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.

Symptoms of a bad switch gas valve include:

• Burners not igniting
• Irregular or weak flame
• Gas odor near the stove
• Inconsistent burner performance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures gas valve connections on your cooktop. Replace if loose, cracked, or causing gas leaks. Verify fit with your model number before ordering.

Right angle

Burner tube assembly for gas cooktop left rear burner. Replaces cracked, corroded, or damaged tubes that deliver gas from the orifice to the burner.

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

• Loose or wobbly parts or panels within the appliance's interior or exterior
• Panels or components falling out of place, creating gaps or exposing internal parts
• Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

ST10-16 X 7/16"

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Package of 12

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Replacement mounting screw for securing panels, trim, and brackets on ranges. Needed when original screws are missing, stripped, or damaged during repairs.

This is a printed user manual that explains basic operation, safety guidelines, and maintenance tips so you can use your appliance correctly and keep it running safely. Handy reference for owners and service technicians. What it does:

• Describes control functions, settings and normal operation in plain language
• Lists safety cautions and proper handling to reduce risk of injury or damage
• Provides basic maintenance recommendations and care tips
• Offers simple troubleshooting steps for common issues and error indicators

• No tools required; retain the manual near the appliance for easy reference
• Read safety and installation sections before operating the appliance
• Keep manual dry and free from grease or heavy soiling to preserve legibility