Parts for Ge PFW950SPT2DS: Cabinet (1) Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This main control board is the washer's central circuit module. It regulates cycle timing and coordinates key functions so your front-load machine fills, washes, drains, and spins as designed.

• Controls cycle timing and operation of the motor, drain pump, and water inlet valves
• Communicates with key sensors such as water level/pressure and the door lock
• Failure symptoms include no start, stopping mid-cycle, or no fill/drain/spin
• May trigger error codes or unresponsive controls depending on failure mode

• Disconnect power before servicing; electricity can cause injury
• Handle the board with ESD care; avoid touching components and contacts
• Transfer wire connectors one at a time; take photos to document routing
• Follow the included instructions to mount and configure the new board, then run a test cycle

This control board cover is the protective housing that shields the oven/range electronic control board from spills, grease, and accidental contact. It helps prevent debris and moisture from reaching sensitive circuitry for more reliable operation. What it does:

• Covers and protects the electronic control board from splashes, food debris, and grease
• Helps reduce accidental contact with control board components during use or service
• Can prevent shorting or damage caused by loose debris or minor moisture exposure
• Useful when replacing a damaged, cracked, or missing control board enclosure

• One control board cover

• Disconnect power at the circuit breaker or unplug the appliance before service
• Handle near electronics carefully; avoid touching circuit components directly
• Align cover over the control board and secure with the factory mounting clips or screws
• Inspect electronics before reassembly

This Wi-Fi bracket secures the appliance Wi-Fi module in place to keep the module stable and aligned for reliable wireless connectivity. It provides a simple mounting point that prevents loose wiring and component movement. What it does:

• Holds and positions the Wi-Fi module or wireless adapter inside the appliance
• Prevents the module and connector from shifting or disconnecting during use
• Reduces stress on wiring and connectors that can cause intermittent connectivity
• Helps maintain proper clearance from other components for safe operation

• Turn off power to the appliance at the breaker before starting any work.
• Mount using the factory screw locations; use only the screws specified for your model.
• Handle the Wi-Fi module and wiring gently to avoid connector damage.

This Wi-Fi & Bluetooth control board restores wireless connectivity so your appliance can pair with smart devices and communicate with apps or hubs. It replaces a failed or unresponsive wireless module to re-enable remote monitoring and control. What it does:

• Provides Wi-Fi and Bluetooth radio functions for appliance app connectivity and smart features
• Enables remote diagnostics, notifications, and appliance-to-app communication when supported
• Replaces boards that show no wireless connection, intermittent pairing, or failed network registration
• Works as the appliance's primary wireless interface; does not include separate display or main control board functions

• One Wi-Fi & Bluetooth control board with instructions

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Follow manufacturer instructions for board handling and ESD-sensitive components
• Verify wiring harness connections and antenna leads are secured and routed per OEM guidance

This upper-right harness support secures the appliance wiring harness in the cabinet to prevent rubbing, pinching, or loose wiring that can cause noise or electrical faults. It restores proper wire routing and strain relief. What it does:

• Holds the wiring harness in the upper-right cabinet area to keep wires organized and away from moving parts
• Prevents harness chafing and reduces the chance of intermittent electrical problems or shorts from loose wiring
• Keeps connectors and wires positioned for reliable connections and service access
• Helps eliminate rattles or vibration-related noise caused by loose wiring

• One upper-right harness support

• Disconnect power to the appliance before starting any repair
• Remove the access panel or liner needed to reach the upper-right harness area
• Position the harness, align the support, and secure by snapping or fastening per the appliance's original attachment points
• If any clips or fasteners are damaged, replace them to ensure a secure installation

This GE Damper Pin is an OEM part for GE washing machines. It plays a vital role in the machine's balance system, helping to stabilize the drum during operation. This damper pin is built to withstand regular use, ensuring your washing machine runs smoothly.

A bad damper pin washer can occur due to various reasons such as wear and tear, overloading, or improper use of the washing machine. These factors can lead to the part becoming loose or damaged, impacting the overall performance of the appliance.

Symptoms of a faulty Damper Pin include:

• Unusual noises during the spin cycle.
• Excessive vibration or shaking of the machine.
• The drum appears off-balance or moving erratically.
• Increased wear on other suspension components.
• Potential leaking due to misalignment.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This top panel pin secures the appliance's top panel to the cabinet, keeping the panel aligned and stable for safe use. Replaces a worn or broken pin to stop panel movement and rattling. What it does:

• Holds the top panel in place so it stays aligned with the cabinet
• Prevents the panel from shifting, rattling, or lifting during use
• Restores a secure fit after a bent, broken, or missing pin
• Simple, single-piece replacement used where the panel pivots or seats

• One top panel pin

• Turn power off and unplug the appliance before beginning any work
• Remove the top panel per the manufacturer's instructions to access the pin
• Inspect surrounding clips and brackets; replace damaged hardware as needed

This rear damper bracket secures the refrigerator damper assembly to the cabinet, keeping the air-flow control components aligned for proper operation. Replacing a broken bracket restores stable damper positioning and helps reduce noise and airflow issues. What it does:

• Holds the damper assembly in place at the back of the cabinet so the damper can open and close correctly
• Prevents the damper from shifting or rattling, which can cause unusual noises
• Helps maintain consistent airflow from the freezer/fridge duct by keeping the damper aligned
• Useful when the original bracket is cracked, broken, or missing mounting points

• One rear damper bracket

• Disconnect power to the appliance before starting any repair
• Remove any interior shelving or rear access panels necessary to reach the damper area
• Keep fasteners and any small clips; transfer them only if compatible and explicitly required
• Inspect the damper and actuator for wear before reassembly

This front damper bracket secures the refrigerator air-damper assembly to the cabinet, helping maintain proper airflow between compartments for consistent cooling. Durable replacement part designed to restore damper alignment and function. What it does

• Holds the air-damper assembly in the correct position to regulate cold-air flow between freezer and fresh-food sections.
• Helps prevent damper misalignment that can cause uneven temperatures or airflow noise.
• Works with the damper actuator and housing to enable controlled opening and closing of the air passage.
• Common symptom: broken, loose, or cracked bracket causing a rattling sound or improper damper movement.

• One front damper bracket.

• Intended for use in refrigerators; follow manufacturer service instructions for access and removal of interior panels.
• Disconnect power (unplug or shut off breaker) before starting any repair to avoid electrical shock.
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the new bracket.

The Leveling Leg is an OEM part for GE front-loading washing machines. It provides adjustable support to properly level the unit and ensure stable, vibration-free operation. Proper leveling is crucial for minimizing noise and preventing excessive shaking during spin cycles that could negatively affect cleaning performance or damage internal components over time.   

Symptoms of a faulty leveling leg include:

• The washer rocking or wobbling noticeably during use  
• Excessive vibration and noise during wash and spin cycles
• Difficulty getting the washer fully level after repeated adjustments
• Visible deformation bends, or damage to the leveling leg

This genuine GE replacement leg restores precise leveling ability to deliver optimally balanced performance. It is also compatible with washer models produced by Hotpoint, RCA, and Kenmore.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Long shipping bolt that secures internal parts during transport to help prevent shifting and damage. Use this replacement when the original bolt is missing, bent, or stripped so the appliance stays stable during moves. What it does:

• Anchors internal components during shipping or relocation to reduce movement and impact damage
• Stops rattling or shifting caused by a missing or damaged shipping bolt
• Used when preparing the appliance for transport or when restoring factory shipping hardware
• Fits the OEM mounting point and functions as the original factory shipping fastener

• Disconnect power and follow all safety steps before working on the appliance
• Use basic hand tools; do not overtighten—thread damage can occur
• Install per the manufacturer's service instructions or parts diagram

This short shipping bolt secures appliance components for safe transport and prevents movement or damage during delivery. Use it when moving or shipping the appliance and remove it before normal operation to avoid noise or stress on parts. What it does:

• Holds internal components firmly in place during transport to prevent shifting and damage
• Reduces risk of rattles or loose parts caused by movement while shipping
• Commonly used on compressors/mounting assemblies and other mounted components
• Helps protect internal tubing and wiring from strain during handling

• One short shipping bolt

• Remove shipping bolts before powering on or operating the appliance
• Disconnect power and take appropriate safety precautions before working on the appliance
• Keep removed hardware for reuse if reinstalling for future transport

This shipping bolt hole cover plugs the opening left by a shipping or transit bolt, protecting the appliance interior and restoring a finished look. It helps keep out dust and debris while covering an unused fastener hole. What it does:

• Covers the hole left after removing a shipping or transit bolt to improve appearance
• Helps prevent dust, lint and small debris from entering the cavity
• Reduces drafts and potential moisture entry at the exposed opening
• Keeps the area safe from accidental contact with sharp edges around the hole

• One shipping bolt hole cover

• Install by pressing the cover into the hole until it snaps or seats flush; no special tools usually required
• Ensure the shipping bolt and any fasteners are fully removed before installing the cover
• Disconnect power or follow appliance safety guidelines when accessing internal panels

A small replacement housing screw that secures appliance panels and brackets, restoring proper fit and preventing rattles or loose panels. Fits common appliance housings where a short ST4 x 12 self-tapping screw is required. What it does:

• Fastens housing panels, trim, or internal brackets to maintain proper alignment and reduce vibration
• Replaces missing or damaged screws that cause loose or rattling panels
• Works with sheet metal and plastic mounting points designed for ST4 thread size
• Small, low-profile head designed for appliance interiors

• One housing screw (ST4 x 12)

• Disconnect power before servicing the appliance and work on cool surfaces
• Use the correct screwdriver or bit to avoid stripping the head
• Install gently and avoid overtightening to prevent thread or panel damage

This right spring sheath protects and guides the dryer/washer door spring, helping the spring slide smoothly and reducing wear. It restores proper spring movement so the door opens and closes without binding or rubbing. What it does:

• Covers and protects the right door spring from abrasion and metal-on-metal contact
• Keeps the spring aligned so the door moves smoothly and evenly
• Helps reduce squeaks, scraping noises, and premature spring wear
• Useful when the original sheath is cracked, split, or missing

• One right spring sheath

• Disconnect power to the appliance before beginning any repair
• Spring assemblies are under tension; use proper tools and caution when removing or reinstalling springs
• Wear gloves and eye protection to prevent injury from sharp edges or snapped springs
• Follow the manufacturer's service instructions for safe and correct installation

A small foam cushion designed to fit on the appliance crossbrace to reduce vibration and prevent metal-to-metal contact. Helps quiet operation and protects adjacent components from abrasion or rattling. What it does:

• Cushions the crossbrace to absorb vibration and reduce noise during operation
• Prevents metal edges from rubbing or chafing nearby parts
• Helps stabilize trim or panels that contact the crossbrace
• Used where a soft, durable spacer is needed to stop rattles or wear

• Disconnect power before accessing internal panels or structural braces
• Remove any covers or fasteners necessary to access the crossbrace area
• Clean mating surfaces of oil, dust, and old adhesive for best fit
• Press or seat the pad into place; use only OEM-recommended adhesive if the original used adhesive

This shipping bracket stabilizes a washer's internal components for safe transport. Install it before moving or returning the appliance to help prevent damage from vibration, shock, or shifting during shipment.

• Secures internal assemblies to reduce movement while the unit is in transit
• Helps protect the cabinet and internal parts from impact-related damage during moves
• Replace if the original bracket is missing, bent, or cannot be secured
• Remove and store the bracket before operating the washer

• Disconnect power and turn off water supply before installing any shipping hardware
• Follow your model's moving/transport instructions for exact placement and fastening
• Do not operate the washer with shipping hardware installed
• After transport, remove the bracket and verify leveling and connections before use

The Power Cord is an OEM part for GE washing machines. It provides the crucial connection between the washer and a standard 120V power outlet for operation. 

Causes of a bad power cord can include cracking, fraying, cuts, or pinched insulation sustained over multiple load cycles. 

Symptoms of a bad power cord include: 

• Washer fails to receive power and will not operate
• Loose, intermittent, or defective connections 
• Exposed or damaged internal wiring seen inside the cord casing
• Tripped breakers or blown fuses in the home's electrical panel

This OEM GE replacement power cord is also compatible with some Hotpoint, RCA, and Kenmore models. Proper electrical power is mandatory for wash cycle functions.

These mounting screws secure the refrigerator water inlet valve to the appliance frame, keeping the valve and water line stable during normal use. Replacing worn or missing screws restores proper valve alignment and reduces vibration. What it does:

• Fastens the water inlet valve to the cabinet or bracket so the valve stays in place
• Prevents valve movement that can stress supply lines or cause noise during fill cycles
• Helps maintain a consistent seal at the valve connection to reduce risk of leaks
• Restores factory mounting hardware fit after loss or corrosion

• Disconnect power to the appliance and shut off the water supply before installing
• Use the correct screwdriver or driver bit to avoid stripping heads
• Replace only with the exact screw size and type for proper fit; do not over-tighten
• Inspect surrounding valve and tubing for damage while mounting; tighten connections to manufacturer torque recommendations

This is the drain pump and filter assembly for select washing machines. It moves wastewater out of the tub while trapping lint and debris to help prevent clogs and protect the pump.

• Pumps water out during drain cycles and spin
• Integrated filter screens out debris to maintain flow
• Can help resolve slow or no drain, standing water, or draining-related errors
• May reduce unusual humming/buzzing from a failing pump

• Unplug the washer and turn off water supply before servicing
• Have towels or a shallow pan ready—residual water will drain when hoses are removed
• Note hose and wire positions before transfer; swap clamps and connectors one-for-one
• After installation, run a short drain/spin to check for leaks and proper operation

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.