Parts for Ge PFW950SPT2DS: Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This power cord fix belt is a small cord-retaining strap that secures the appliance power cord to the cabinet. It helps keep the cord in place to reduce strain on the cord connection and maintain a reliable power connection. What it does:

• Holds the power cord firmly against the appliance frame to prevent tugging on the wiring
• Reduces movement that can loosen or wear the cord connection over time
• Helps prevent intermittent power or connection issues caused by a shifted cord
• Keeps cord routing neat and reduces stress at the plug/body interface

• One power cord fix belt

• Always disconnect power before accessing the cord or electrical panels
• Typically installs behind a rear access panel or at the cord entry point; basic tools may be required
• Position so the cord is secure but not pinched; replace if cracked or brittle

This LED light assembly replaces a failed or dim interior refrigerator lamp to restore bright, even illumination for easier food visibility. It's a direct-fit lighting module designed to match the original equipment form and function. What it does:

• Provides reliable interior illumination when the door is opened
• Replaces dim, flickering, or non-working lights
• Helps locate items quickly and improves overall visibility inside the compartment
• Uses LED lighting for long service life compared with older bulbs

• Disconnect power to the appliance before starting any work
• Handle the assembly carefully to avoid damaging the lens or connector
• Remove existing light housing/mounting screws and unplug the connector, then plug in and secure the new assembly

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

This clamp secures the refrigerator's internal drain hose to the air chamber so defrost and condensation water drains properly, helping prevent leaks and water buildup inside or beneath the appliance. What it does

• Fastens the internal drain hose to the air chamber to keep the drain connection sealed
• Helps direct defrost and condensation water into the drain system, reducing pooling
• Can stop common symptoms like water under the fridge, dripping inside compartments, or ice buildup from poor drainage

• One hose-to-air chamber clamp

• Disconnect power before servicing to avoid shock or injury
• Access may require removing interior panels or the evaporator cover
• Use pliers or a screwdriver as appropriate to remove and reinstall the clamp; avoid overtightening to prevent hose damage
• Inspect the hose and fittings for cracks or blockages while replacing the clamp

This ground screw secures an appliance's chassis grounding connection to ensure a reliable electrical ground and help reduce the risk of shock or electrical faults. Simple replacement when the original screw is missing, damaged, or corroded. What it does:

• Fastens the appliance ground wire or grounding strap to the metal chassis for a secure electrical ground.
• Restores a proper grounding point when the original screw is loose, stripped, corroded, or missing.
• Helps address symptoms related to poor grounding, such as intermittent power, electrical noise, or tripped breakers (as reported).
• Provides a direct, stable connection that supports safe appliance operation.

• One ground screw

• Disconnect power to the appliance before attempting any repairs to avoid electrical shock.
• Tighten to snug contact with the chassis; avoid overtightening which can strip threads or damage the metal.
• If ground wire or chassis threads are damaged, inspect for necessary additional parts or repair.

This door glass hose carries water along the appliance door to and from the inner door assembly, helping direct moisture away from sensitive components for more reliable operation. It's a direct-fit replacement designed to restore proper water routing. What it does:

• Routes water inside the appliance door to prevent pooling and protect internal components
• Helps maintain proper dispenser/drain function when installed correctly
• Can resolve leaks or water trails coming from the door area when worn or damaged
• Fits where the original door hose has cracked, split, or become brittle

• One door glass hose

• Disconnect power and shut off the water supply before starting work
• Remove the door panel carefully to avoid breaking the inner glass or trim
• Replace only the damaged hose and make secure, leak-free connections; inspect clamps and fittings

This spray nozzle directs wash water toward glassware to help improve rinsing and reduce spotting. It replaces a worn or broken nozzle to restore the dishwasher's intended spray pattern for delicate items. What it does:

• Directs a focused water spray toward glasses and stemware for better rinsing.
• Helps reduce water flow loss from a cracked or clogged nozzle.
• Commonly replaced when glassware is not being cleaned or rinsed properly.
• Compatible with the dishwasher's spray arm assembly where the nozzle mounts.

• One spray nozzle to glass (single nozzle as shown).

• Disconnect power and water supply before servicing the dishwasher.
• Access may require removing the upper spray arm or tub components; handle plastic parts gently to avoid damage.
• Clean surrounding fittings and check for debris before installing the new nozzle.

This damper gasket clamp secures the gasket around the damper assembly to maintain a tight seal and proper airflow. It helps reduce air leaks and vibration so the appliance runs more quietly and efficiently. What it does

• Holds the damper gasket in place at the rear damper assembly to maintain a seal.
• Prevents air leakage that can cause reduced airflow or inconsistent operation.
• Minimizes rattling or vibration from a loose damper gasket.
• Supports correct venting behavior that affects temperature and performance.

• One rear damper gasket clamp.

• Disconnect power (and gas if applicable) before servicing; follow all safety precautions.
• Access typically requires removing the rear access panel or cabinet depending on model.
• Inspect the gasket and damper for damage; replace any worn parts to ensure a proper seal.

The Suspension Damper is an OEM component specifically designed for GE washing machines. This accessory helps stabilize the tub during high spin cycles.  

Causes of a bad suspension damper can include normal wear from absorbing vibrations spin cycle after spin cycle. Trapping of debris or mineral buildup may also impact damper operation over many years.

Symptoms of a bad suspension damper include:

• Excessive shaking, rattling or loud noises during spin  
• Premature wear of other suspension parts like the springs
• Potential tub or transmission damage from lack of control 

This GE replacement part is also compatible with Hotpoint, RCA and select Kenmore models as well. 

This GE Damper Pin is an OEM part for GE washing machines. It plays a vital role in the machine's balance system, helping to stabilize the drum during operation. This damper pin is built to withstand regular use, ensuring your washing machine runs smoothly.

A bad damper pin washer can occur due to various reasons such as wear and tear, overloading, or improper use of the washing machine. These factors can lead to the part becoming loose or damaged, impacting the overall performance of the appliance.

Symptoms of a faulty Damper Pin include:

• Unusual noises during the spin cycle.
• Excessive vibration or shaking of the machine.
• The drum appears off-balance or moving erratically.
• Increased wear on other suspension components.
• Potential leaking due to misalignment.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This dispenser fill hose routes water from the supply to the fridge dispenser or ice-area connection, restoring proper water delivery and helping stop leaks caused by cracked or collapsed tubing. A direct replacement when the original line is damaged. What it does:

• Carries water from the supply/valve to the dispenser or ice-area inlet.
• Replaces cracked, kinked, collapsed, or leaking tubing that causes pooling or drips.
• Helps restore normal dispenser water flow and reduces the chance of water damage.
• Common symptoms: water leaking under or inside the refrigerator, slow or no water at the dispenser, visible hose damage.

• Turn off the refrigerator power and shut off the water supply before starting work.
• Access may require removing the kick plate, toe grille or interior service panels depending on model.
• Remove and replace clamps or fittings as needed; ensure a secure, leak-free connection and route hose without sharp bends.
• After installation, restore water and power, check fittings for leaks, and purge air from the line by dispensing water until flow is steady.

This dispenser fill hose nozzle directs water from the refrigerator supply into the dispenser assembly for reliable dispensing and proper fill flow. It replaces a worn or damaged nozzle to restore normal dispenser operation. What it does

• Guides water from the fill hose into the dispenser so drinks and ice cycles receive proper water flow
• Common fix for slow or intermittent dispensing from the fridge dispenser
• Helps stop leaks at the dispenser opening caused by cracked or damaged nozzle parts
• Works as the inlet point between the fill hose and dispenser assembly

• One dispenser fill hose nozzle

• Shut off the water supply and unplug the appliance before starting
• Remove the dispenser housing or access panel as required by your model to reach the nozzle
• Inspect hose connections and seating; replace any brittle or cracked hoses or gaskets if found
• After installation, restore power and water, then check for proper operation and leaks

Accelerometer (vibration sensor) that detects washer tub movement and sends signals to the control board so the machine can rebalance loads and reduce excessive shaking and noise during spin cycles. What it does:

• Measures tub/vibration movement and reports acceleration to the washer control board.
• Helps the machine detect and correct unbalanced loads during spin cycles.
• Common symptoms of a failing sensor: excessive shaking or banging during spin, interrupted or incomplete spin cycles, or unusual vibration/noise.
• Restoring accurate vibration sensing can reduce wear and improve spin stability.

• Disconnect power (and water, when applicable) before servicing to avoid shock or injury.
• Handle the sensor and connector carefully; secure the mounting and fully seat the electrical connector per the instructions.
• Verify routing and clearance so the sensor and wiring do not contact moving parts.
• After installation, run a test spin with a moderate load to confirm normal operation.

This suspension spring supports the washer tub and controls movement during wash and spin. Replacing a weakened spring helps reduce vibration and banging, restoring stable operation and protecting nearby components from excessive motion.

• Supports and balances the suspended tub/drum inside the cabinet
• Absorbs movement to limit vibration and banging during high-speed spin
• Helps prevent off-balance interruptions and "walking"
• Typical signs of wear: tub sits low or uneven, excessive shaking, thumping, or squeaking

• Disconnect power and shut off water before servicing; move the appliance for safe access
• Springs are under tension—support the tub and use appropriate pliers/spring tools; wear gloves and eye protection
• Note original hook locations/orientation and reinstall in the same positions
• Inspect mounting points and related hardware; replace any worn parts to maintain proper suspension

This Overnight dry filter is a direct-replacement filter that helps capture moisture during extended drying cycles, reducing dampness and helping keep clothes fresher between cycles. Simple swap to restore proper drying performance. What it does:

• Traps excess moisture during overnight/extended dry cycles to help reduce lingering dampness and musty odors
• Helps maintain air flow through the dryer filter pathway for more consistent drying
• Useful if clothes come out wetter than expected or develop a stale smell after long cycles

• 1 Overnight dry filter

• Disconnect power (and gas, if applicable) before inspecting or replacing the filter
• Remove the old filter from the dryer filter housing and install the new filter in the same orientation; no special tools typically required
• Inspect the filter housing for lint or debris and clean before installing the new filter

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rear counterweight restores balance to the washer suspension so the tub spins smoothly and reduces vibration and cabinet movement. Fits the washer rear cabinet and mounts to the frame to stabilize the tub during spin cycles. What it does:

• Adds mass at the rear of the machine to counterbalance the wash tub and drum
• Helps reduce excessive shaking, banging, or movement during spin cycles
• Helps minimize noise caused by an unbalanced load or worn suspension components
• Supports stable operation when combined with intact suspension and leveling

• Disconnect power and water before accessing the rear cabinet
• Remove the rear access panel to reach the mounting area; follow OEM instructions for fasteners
• Install only on the specified mounting points; tighten hardware to the OEM torque if provided
• If excessive vibration persists after install, inspect suspension springs, dampers, and leveling

This counterweight bolt secures a refrigerator counterweight to the cabinet, keeping the unit balanced and preventing movement. It's a direct-fit replacement designed to restore proper weight retention and reduce rattling. What it does:

• Fastens the counterweight assembly to the refrigerator cabinet so the weight stays secured
• Helps stop cabinet shifting, excessive vibration, and rattling during operation
• Restores correct weight positioning that can affect door alignment and stability

• Disconnect power to the appliance before starting any repair
• Support the counterweight assembly while removing or installing the bolt to prevent sudden movement
• Thread bolt by hand first to avoid cross-threading, then tighten snugly; do not over-torque
• If access requires removing panels or shelves, keep track of fasteners and reassemble panels securely

This rear tub is the outer wash tub that holds the wash basket and contains water during cycles, restoring the washer's ability to hold water and support the drum assembly. Replaces a cracked or damaged outer tub. What it does:

• Provides the water-tight outer housing for the wash basket so the machine can fill and agitate properly
• Supports the inner drum and bearings to keep the tub rotating smoothly
• Stops leaks caused by cracks, corrosion, or damage to the outer tub
• Helps reduce noise and wobble when the outer tub and mounts are functioning correctly

• Disconnect power and water supply before beginning any repair
• This is a heavy, bulky component — get a second person or use proper lifting gear
• Requires removing the cabinet, control console, and drive components; follow OEM service instructions
• Inspect seals, gaskets, bearings, and mounting hardware while the washer is disassembled; replace as needed

This tub seal replaces the outer bearing/tub seal that keeps the dryer tub rotating smoothly and helps contain lint, dust and dryer vapors. Restores proper drum seating and reduces leaks, noise and rubbing. What it does:

• Seals the tub around the outer bearing to prevent lint and moisture from escaping
• Helps maintain correct drum alignment for smooth rotation
• Reduces rubbing, squeaks or grinding caused by a worn seal
• Helps protect bearings and nearby components from contamination

• One tub seal as shown

• Disconnect power before starting and follow the dryer's disassembly instructions
• Reaching the seal typically requires removing the front panel/door and drum; handle drum edges carefully
• Inspect the bearing and shaft for wear and replace if damaged to avoid premature seal failure
• Use basic hand tools;

The Gasket is an OEM part for GE dishwashers. It serves as the main seal between the tub and door, playing a critical role in preventing water leaks and maintaining moisture levels within the dishwasher. The material and design allow for a tight, durable seal during each wash cycle. 

Symptoms of a bad gasket include:

• Water leaks appearing around the base of the door or tub 
• Puddles or standing water inside the dishwasher
• Moisture indicators change color when the door is closed
• Inability to create or maintain proper pressure levels

Causes of failure can be cracks, tears, or wear developing from regular use and exposure to hot water and steam over time.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Inner Gasket Clamp is an OEM part for GE washing machines. It is responsible for securely holding the inner gasket in place, creating a tight seal between the tub and the door. This seal helps prevent leaks and contains water, lint, and debris during the wash and spin cycles. 

Symptoms of a bad inner gasket clamp can include:

• Water leaks around the door during operation  
• Excessive moisture buildup inside the door
• Deterioration or tearing of the inner gasket
• Difficulty closing or sealing the door properly

Causes of a bad clamp include damage from excessive Door popping or swinging open unexpectedly force or impact, wear and tear over time, or failure of the clamp components. 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Motor is an OEM part for GE front-loading washing machines. It spins the wash basket during the wash and spin cycles. Whether gently tumbling fabrics or quickly extracting water from clothing, the motor works throughout the cleaning process.

Common causes involve bearing friction wearing down over extended use. Moisture infiltration can also potentially lead to electrical faults within the motor.

Symptoms of a faulty motor may include:

• Cessation of basket/drum movement during cycles
• Inability to activate specific cycles
• Noisy operation or abnormal vibrations
• Intermittent starting and stopping issues

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This washer pressure chamber mounts to the outer tub and connects to the pressure hose, creating the sealed air pocket the control uses to sense water level—restoring accurate fills and helping prevent overfill/underfill that can disrupt cycles.

• Forms an air trap that transmits water-level pressure to the sensor/control
• Helps the washer stop filling at the correct level and advance the cycle
• Can resolve symptoms like overfilling, underfilling, or repeated fill attempts
• A common fix when the original chamber is cracked, leaking, or clogged with residue

• Disconnect power and turn off water supply before servicing
• Access the chamber per your model; remove the pressure hose and mounting fasteners
• Inspect/clear the hose and port; reconnect the hose fully seated with no kinks for an airtight seal
• Reassemble, restore power/water, and run a test fill to check for leaks and proper level sensing

The Boot Gasket Clamp is an OEM part for GE washing machines. It secures the flexible boot gasket in the place where the washer connects to water supply lines. Proper installation with this clamp around the gasket helps prevent leaks at this critical water inlet point.

Causes of a bad boot gasket clamp include corrosion, cracks, or broken clips that no longer hold the gasket firmly in position. 

Symptoms of a bad clamp include:

• Water seeping or spraying from the boot connection area   
• Loose, slipping, or misaligned gasket that does not form a tight seal
• Rust or mineral buildup indicating long-term moisture exposure

This OEM GE replacement part is also compatible with some Hotpoint, RCA, and Kenmore models. 

This clamp secures the tub-to-internal drain hose connection to help prevent leaks and maintain proper drainage. A simple replacement when the original clip is corroded, broken, or no longer holds the hose tight. What it does

• Secures the drain hose to the tub/internal fitting to maintain a watertight connection
• Helps prevent water leaks and dripping from the hose junction
• Reduces risk of water pooling under the appliance or water damage during drain cycles
• Can resolve symptoms like intermittent leaking or a hose that slips off under pressure

• One tub-to-internal drain hose clamp

• Disconnect power to the appliance and turn off the water supply before beginning.
• Access the clamp via the washer's access panel or cabinet per your model's service instructions.
• Replace the clamp with the original orientation; use the appropriate pliers or clamp tool to secure without over-stressing the hose.
• Reassemble panels and run a short drain test to ensure there are no leaks.

This pulley is the replacement idler wheel that guides and tensions the dryer drum belt to keep the drum turning smoothly. Restores proper belt tracking and reduces rubbing or squeaking caused by a worn idler. What it does:

• Guides and maintains tension on the dryer drive belt for consistent drum rotation
• Reduces belt slip that can cause the drum to stop or tumble unevenly
• Helps prevent rubbing, squeaks, or overheating from a loose or damaged belt
• Works as the rotating bearing surface between the belt and dryer frame

• Disconnect power to the appliance before attempting any service
• Inspect the drive belt and mounting hardware while replacing the pulley; replace worn parts as needed
• Typical installation requires basic hand tools and access to the dryer cabinet

Replacement drive belt that turns the dryer drum to tumble clothes so loads dry evenly. Restores normal tumbling by transferring motor power to the drum when the original belt is worn, stretched, or broken. What it does

• Transfers motor torque to the drum so the dryer tumbles and circulates air through the load.
• Commonly needed when the drum won't turn, tumbles intermittently, or you hear a slipping or rubbing noise.
• Works with the dryer's idler and motor pulley to maintain proper drum rotation.
• Prevents further wear on the motor and drum components when replaced at first signs of damage.

• Disconnect power before starting; for gas dryers, also shut off the gas supply and allow components to cool.
• Inspect idler pulley, motor shaft, and drum rollers for wear when replacing the belt and replace any worn parts.
• Route the belt around the drum and pulleys per the machine's service diagram; ensure proper tension and alignment before testing.

This pressure hose carries water between the refrigerator water valve and the icemaker or dispenser, restoring reliable water flow and preventing leaks when the original line is damaged or clogged. It's a direct-fit replacement designed for easy swap-out. What it does:

• Routes water from the refrigerator water valve to the icemaker or dispenser
• Maintains proper flow for filling the ice mold and dispensing water
• Replaces cracked, pinched, or collapsed tubing that causes leaks or low flow
• Helps stop intermittent filling and supply interruptions caused by a damaged hose

• Disconnect power and shut off the household water supply before starting
• Drain remaining water from the line and protect surfaces from spills
• Hand-tighten fittings, then snug with appropriate tools—avoid overtightening
• After installation, restore water and power, run a few cycles, and check all connections for leaks

This sump hose channels defrost and condensation water from the refrigerator evaporator to the drain/sump to help prevent leaks and water buildup. Replace a damaged hose to restore proper drainage and reduce puddles. What it does:

• Carries evaporator and defrost water to the drain or pump to prevent pooling.
• Helps keep the freezer and fresh-food compartments draining properly.
• Use when you see water pooling under or inside the refrigerator or persistent drip/overflow from the drain area.
• Helps prevent freeze-ups or odors caused by standing water in the drain path.

• Disconnect power and turn off the water supply before starting service.
• Inspect and clear the drain channel and fittings before installing the new hose.
• Ensure hose ends are fully seated and secured with clamps or retained fittings to avoid leaks.
• Refer to your model's service manual or OEM illustrated parts list for routing and clamp locations.

This tub fill hose directs incoming water from the inlet to the washer tub and includes a clamp for a secure connection. It restores proper water flow and prevents leaks at the tub connection point. What it does:

• Replaces a worn, cracked, or leaking fill hose to stop water drips and pooling.
• Ensures a sealed path for incoming wash water to reach the tub during fill cycles.
• Helps prevent water damage and maintains consistent fill performance.
• Compatible with standard tub inlet connections where this clamp-style hose is used.

• One tub fill hose with one tub clamp as shown.

• Disconnect power and water supply before starting any repair.
• Confirm orientation and seating of hose on the tub inlet; tighten clamp securely but avoid overtightening.
• Inspect surrounding hoses and fittings while replacing; replace any brittle or damaged components.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.