Parts for Ge CDB36LP2PBS1: Cabinet 2 Parts

Bottom hinge bushing guides the refrigerator door hinge pin for smooth pivoting. Replace if worn, cracked, or missing to restore proper alignment.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Holds and seals the water filter cartridge, routing water to your dispenser and icemaker. Replace if leaking or water flow is reduced. Verify fit.

Bypass cap allows refrigerator water and ice dispensers to work without a filter installed. Replace if cracked or leaking. Confirm fit with your model.

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Nylon hinge arm secures and guides refrigerator doors for smooth pivoting and alignment. Replace if cracked, broken, or worn to restore door support.

White 12-24 screw secures panels, trim, and brackets inside your refrigerator. Replace missing, stripped, or damaged fasteners to restore stability.

Secures and guides the ice maker assembly to prevent shifting during operation. Replace if cracked, broken, or missing to restore proper alignment.

Plastic tubing that routes water through your refrigerator's system. Replace if cracked, brittle, kinked, or leaking to restore proper flow and prevent damage.

Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.

Ice cubes jamming or not dispensing? The stripper comb releases cubes from the ejector fingers during harvest. Moderate DIY, requires partial disassembly.

Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.

Lower front panel that covers the space beneath your refrigerator. Replace if original is cracked, broken, or missing to restore finished appearance.

Replaces the lower front trim panel that covers the gap beneath your refrigerator. Restores a finished look when the original is cracked or missing.

Spring should have GOLD color.

Ice maker overflowing or producing hollow cubes? This fill cup directs water properly into the ice maker mold. Quick 15-minute DIY repair.

This corner key assembly secures and finishes a refrigerator door corner, restoring proper alignment and a clean appearance. It replaces a cracked, broken, or missing corner piece to help the door close evenly and look factory-original. What it does:

• Provides structural support at the door corner to maintain proper edge alignment
• Covers and protects the underlying corner area from damage and wear
• Helps reduce visible gaps or misalignment that can affect sealing
• Restores the cabinet's finished appearance after impact or deterioration

• One corner key assembly

• Disconnect power to the appliance before starting any repair
• Remove door or trim per manufacturer instructions to access the corner area
• Install with original fasteners or clips; do not force or over-torque plastic snaps
• If hinge or door alignment issues persist, inspect associated hinges and gaskets

Removable plastic bin that collects and stores ice from your ice maker. Replace if cracked, broken, or missing to restore proper ice storage.

Large freezer basket for bottom-mount refrigerators. Replaces cracked, broken, or missing storage baskets in the freezer compartment. Direct fit.

Slide support assembly that stabilizes and guides your refrigerator freezer drawer. Replace when the original is cracked, broken, or worn to restore alignment.

Freezer drawer slide rail for bottom-mount refrigerators. Replace if drawer is difficult to open, rail is cracked, or drawer jams when sliding out.

Truss head screw for refrigerator assembly and panel mounting. Replace missing, stripped, or damaged screws during repairs or part installations.

Phillips pan head tapping screw for refrigerators and freezers. Secures panels, brackets, and internal components. Replace missing or stripped screws.

Size: 1/4 inch diameter.

Closure assembly panel for bottom-mount refrigerators. Replaces cracked, broken, or missing closure panels that damage the unit's appearance or structure.

Small freezer basket for bottom-mount refrigerators. Organizes frozen items in the freezer drawer. Replace if cracked, broken, or missing. Easy install.

Mounts to the freezer wall to hold the upper basket in place. Replace if broken, missing, or cracked to restore proper alignment and smooth sliding.

Plastic guide that supports and aligns the upper freezer shelf along its track. Replace if cracked, broken, or worn to restore smooth sliding motion.

Upper freezer basket slide rail for bottom-mount refrigerators. Guides the top basket for smooth gliding. Replace if cracked, warped, or broken.

Freezer drawer slide shim for bottom-mount refrigerators. Replaces worn, cracked, or missing shims that support smooth drawer operation.

Replaces the stud spring on refrigerator and freezer doors. Needed when the original spring is broken, worn, or missing, affecting door alignment.

Left-hand link actuator for refrigerator linkage systems. Replaces worn, broken, or damaged actuators that cause erratic movement in mechanical linkages.

This is a small metal shear pin used in the refrigerator's ice maker or door hinge assembly. It acts as a mechanical safety component designed to break under excessive force, protecting more expensive parts from damage. Replace this pin if it has snapped or sheared off, causing the connected component to become loose, misaligned, or non-functional.

This track shelf is the replacement door shelf track that secures a refrigerator door shelf in place, restoring stable storage and preventing the shelf from shifting or falling during normal use. What it does:

• Provides the mounting channel that a door shelf or retainer sits in to hold items on the refrigerator door
• Replaces a cracked, worn, or broken track that lets a door shelf tilt or slide out
• Restores proper shelf alignment so door bins sit securely and items stay in place
• Compatible with typical snap-in or screw-mounted door shelf assemblies

• Remove all items from the door shelf and, if needed, remove the shelf before replacing the track
• Power off or unplug the appliance only if access requires it; otherwise take care to avoid sharp edges
• Align the track with the door mounting locations and press or secure into place until fully seated
• If hardware is present, retain and reuse existing screws/clips; replace only with manufacturer-specified fasteners

This screw handle trim replaces the small decorative cover that hides and secures the mounting screw on a range/oven handle, restoring a finished look and preventing debris buildup around the screw. What it does:

• Covers the handle mounting screw and provides a clean finished appearance
• Helps keep crumbs and grease out of the screw cavity
• Stops a loose or missing trim from catching on clothing or hands
• Restores cosmetic look after handle removal or damage

• One screw handle trim

• Safety first: unplug the appliance or shut off power to the range before working
• Remove the handle screw, fit the trim over the screw area, then reinstall and tighten the screw securely (do not overtighten)
• Use the correct screwdriver and avoid forcing the trim; check alignment before final tightening
• If the original mounting hardware is damaged, replace it with OEM hardware