Parts for Lg TCW2013CS1: Cabinet And Control Panel Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This rear cover is the exterior cabinet panel that protects the appliance's internal components and helps maintain proper airflow. It restores a finished back surface and prevents debris or pets from contacting working parts. What it does:

• Protects internal parts from dust, spills and physical damage
• Helps direct airflow and maintain proper ventilation paths
• Replaces cracked, warped or missing back panel that can cause rattles or expose components
• Reduces risk of foreign objects entering the appliance and interfering with operation

• One rear cover panel

• Disconnect power and any fuel lines before beginning repair
• Remove existing access panels and fasteners; retain hardware if reusing
• Handle edges carefully—metal panels can be sharp

This control panel assembly houses the user interface and control electronics for the appliance, restoring touch/press controls and display feedback so you can select cycles and settings reliably. What it does:

• Provides the front-facing buttons, touch keys or pad and display window used to enter cycles and options
• Connects to the main control board to transmit user commands
• Restores visible status indicators and error code display when faulty panel prevents normal operation
• Commonly replaces cracked, unresponsive, or water-damaged control overlays and button assemblies

• One control panel assembly as shown

• Disconnect power before starting — risk of shock or damage if power is left connected
• Handle the display and ribbon cable carefully; avoid kinking or pulling on connectors
• Some models require removing the console trim or top cover to access mounting screws and connectors

This cabinet cover replaces a damaged or worn outer housing panel to restore the appliance's appearance and protect internal components from dust and accidental contact. Fits the factory enclosure to keep the unit secure and looking like new. What it does

• Replaces cracked, dented or discolored outer panel to restore cosmetics
• Shields internal parts, wiring and controls from dust and accidental contact
• Helps maintain a proper enclosure so components stay in place and protected
• Eliminates visible gaps or loose panels that can catch on clothing or objects

• Disconnect power to the appliance before starting any work.
• Remove trim pieces and retaining screws as needed; retain original fasteners unless replacements are provided.
• Align cover tabs/clips to avoid bending or cracking the panel; do not force into place.

This main PCB power control board assembly regulates power and coordinates electronic functions for the appliance, restoring control and cycle operation when the original control board fails. Fits as the appliance's primary electronic control module. What it does:

• Regulates incoming power and distributes voltage to components and sensors
• Controls and times major functions, enabling normal cycle selection and operation
• Can resolve symptoms such as no power, unresponsive control panel, or intermittent operation
• Replaces a failed or damaged primary electronic control board

• Disconnect power before servicing to avoid shock; this board handles live circuitry
• Handle board by edges and avoid touching components; use anti-static precautions
• Verify chassis, connectors, and mounting match before installation; do not force connectors

Filter assembly removes contaminants for clean operation. Replace when clogged or water flow weakens. Verify fit with your model number before ordering.

This display power control board assembly powers and controls the appliance's front display and user interface so the controls and status indicators operate correctly. It restores display function when the panel is unresponsive or blank. What it does:

• Supplies regulated power to the display modules and manages basic display functions.
• Restores visible user controls when the display is dark, flickering, or showing erratic behavior.
• Interfaces between the main control electronics and the front display to relay status and button inputs.
• Helps resolve symptoms like an unlit or intermittently working display and display error indicators.

• One display power control board assembly as described.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the board by the edges and avoid contact with components; use ESD precautions if available.
• Verify connectors match and seat fully; do not force connections.

This hinge assembly secures and guides a refrigerator door so it opens and closes smoothly and stays properly aligned. Replacing a worn hinge can restore correct door fit and reduce noise or sag. What it does:

• Supports the door pivot and maintains proper door alignment
• Enables smooth opening and closing without catching or sticking
• Helps preserve a consistent door seal to prevent cold air leaks
• Commonly replaced for noisy, loose, or sagging doors

• Disconnect power and remove any food and door-mounted items before starting
• Support the door while removing fasteners; have a second person if needed
• Use correct-size tools and retain hardware for reuse
• Check door alignment and seal after installation; adjust per the appliance service manual

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This is the outer door frame that surrounds and supports the front-loading washer door assembly. It provides structural rigidity to the door and helps maintain a proper seal against the door gasket during wash cycles. Replace this frame if it is cracked, warped, or damaged, which can cause water leaks or prevent the door from closing and latching securely.

Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.

Replaces the inner door frame trim piece that secures interior door components. Needed when the original frame is cracked, warped, or broken. Restores stability and finished appearance to your washer door assembly.

Secures internal washer components and maintains proper alignment. Replace when brackets are worn, broken, or causing rattling. Confirm fit with your model number.

This part may be black or gray in color.

Replacement handle for laundry center doors. Installs on front panel for opening and closing access. Needed when original is cracked, broken, or missing.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

Protective access cover shields internal washer components from dirt and moisture. Replace if cracked, broken, or missing to restore factory protection.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

Replaces a frayed, melted, or damaged power cord on your washer. Restores grounded connection from wall outlet to internal power circuit.

Fix a washer door that won't close or latch properly. This locker hook engages the lock mechanism to secure the door during cycles and prevent error codes.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.

Washer not filling or overfilling? This water level pressure switch monitors water levels and signals when to stop filling. Easy 10-minute DIY repair.

Washer won't start or shows dE/door lock error? This door switch detects if the door is closed so the cycle can begin. Easy DIY repair with video guide.

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.

Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.

Symptoms of a bad Magnetic Door Plunger include:

• The washing machine door not staying closed during cycles.
• The machine failing to start due to a door sensor not detecting closure.
• Random pausing of the machine during operation if the door unlatches.

This OEM LG part is also compatible with Sears/Kenmore.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.