Parts for Kenmore 796.41073310 (79641073310, 796 41073310): Cabinet And Control Panel Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer accessory assembly component that installs on your machine. Replace if your original part is cracked, broken, worn, or missing from assembly.

Technical service manual for washer repair and maintenance. Includes wiring diagrams, troubleshooting guides, and part replacement procedures.

Leveling leg for washers. Installs at the base to support and level your machine. Replace if cracked, broken, worn, or missing for proper stability.

Rear housing panel that shields internal components and maintains airflow. Replace this outer cover if cracked, broken, or missing to restore protection.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

Secures internal washer components and maintains proper alignment. Replace when brackets are worn, broken, or causing rattling. Confirm fit with your model number.

Size: 6 1/4 inches. Used to secure the washer tub before transporting. They must be removed before using your washer.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

The PCB Assembly is an OEM part for LG washers. It is the computerized printed circuit board that controls all functions of the washer. The PCB receives input signals, processes instructions, and directs commands for the operation of components like the motor, timers, sensors, and more. 

Causes of a bad PCB assembly can include excessive moisture or water exposure, defects from manufacturing, or component failures due to normal wear and tear over time. 

Symptoms of a bad PCB assembly include:

• The washer not powering on
• Failure to complete cycles 
• Inability to detect load size and water levels
• Erratic or unexpected operation
• Fault codes displayed 

This OEM LG part is also compatible with Sears/Kenmore.

Mounts the door hinge to your washer's front cabinet. Replace if bracket is bent, broken, or missing to restore proper door alignment and sealing.

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Washer lid hinge assembly connects the lid to the cabinet. Replace if your hinge is cracked, broken, or worn causing the lid to sag or not stay open properly.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

This outer door frame restores the front-facing trim and mounting structure of a refrigerator door, improving appearance and helping the door seal and align correctly. Use when the door shows visible damage, dents, or loose trim. What it does:

• Replaces the exterior trim and structural frame around the refrigerator door
• Restores proper door appearance and helps maintain correct alignment
• Can reduce air leaks caused by warped or damaged door framing
• Useful when trim is cracked, dented, or the door edge is separated

• High-level replacement; may require removing the door and interior panels for access
• Keep track of screws and clips — some fasteners are reused
• Disconnect power and empty the door shelves before starting to avoid damage or injury

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.

Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.

Symptoms of a bad Magnetic Door Plunger include:

• The washing machine door not staying closed during cycles.
• The machine failing to start due to a door sensor not detecting closure.
• Random pausing of the machine during operation if the door unlatches.

This OEM LG part is also compatible with Sears/Kenmore.

Fix unresponsive buttons or a blank display with this washer control panel assembly. Moderate DIY repair that restores full function to your machine.

Leveling leg assembly for washers and laundry centers. Installs at the base to support and level the unit. Replace if cracked, broken, or missing.

Outer case panel for washers. Covers and protects internal components. Replace if cracked, dented, damaged, or missing to restore appearance and structure.

This part may be black or gray in color.

Replacement cover cap for washers. Snaps onto exposed screws or openings on the washer cabinet. Order when original cap is cracked, broken, or missing.

Replaces the outer trim around your washer door to restore proper fit, sealing, and appearance. Install when the frame is cracked, warped, or damaged. Confirm fit with your model number before ordering.

Fix washer overfilling or won't fill issues with this water level pressure switch. Senses tub water level to control fill cycles. Easy DIY repair.

Appliance won't power on? This power cord assembly restores electrical connection when the cord is damaged or has poor contact. Direct plug-in repair.

Washer won't start or shows dE/door lock error? This door switch detects if the door is closed so the cycle can begin. Easy DIY repair with video guide.

A washer's primary control board is the main control unit of the appliance. If the primary control board malfunctions, the washer may lose all main functions. These functions include spin, drain, and other cycle options. If the problem ends up being the control board, these functions will return when a replacement control board is installed. Begin the installation by unplugging the washer from its power source. This part is for an LG front loading washing machine, and installation may be more technical than a normal top-loader.This LG washer primary control board assembly is a genuine OEM product sourced directly from LG. The part listed is only available individually and is not included with any other components. This part is only compatible with LG washing machines.

Protective access cover shields internal washer components from dirt and moisture. Replace if cracked, broken, or missing to restore factory protection.

Fix no power, intermittent shutdowns, or breaker trips by replacing the noise filter assembly. Filters EMI from AC power to protect the control board.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.