Parts for Electrolux ELFE4222AW: Cabinet / Drum Parts

This control panel replaces the damaged or worn front console on select Frigidaire ranges and cooktops, restoring button access and the kitchen appliance's finished appearance. It provides the visible interface that houses the controls and display. What it does:

• Replaces a cracked, scratched, or faded front console to restore normal access to buttons and touch controls
• Holds control buttons, switches, and the display assembly in the correct position
• Helps prevent dust and moisture from reaching internal electronics behind the console
• Useful when the original panel is bent or cosmetically damaged but internal electronics are intact

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Removal/replacement typically requires removing trim and mounting screws; keep fasteners for re-use
• Handle panel edges carefully to avoid cosmetic damage; use appropriate trim tools to prevent scratching
• If control buttons or the display do not work after installing the panel, the electronic control assembly may also need inspection

This cover plate is a replacement trim piece that restores a finished appearance and protects underlying components from dirt and damage. It's a simple cosmetic and protective part to replace cracked, missing, or worn covers. What it does:

• Covers and protects exposed hardware, openings, or seams to prevent debris buildup.
• Restores the appliance's finished appearance by replacing chipped or discolored trim.
• Helps maintain a proper seal/fit where applicable and prevents accidental contact with internal parts.
• Suitable when original cover is cracked, warped, or missing.

• Disconnect power or unplug the appliance before beginning any repair.
• Usually installs with basic hand tools; avoid overtightening fasteners.
• Handle edges carefully—trim pieces and mounting tabs can be sharp or brittle.

This is a replacement refrigerator door gasket that seals the door to help maintain proper temperature and reduce energy loss. Restoring a tight seal helps keep food fresh and prevents excess frost or condensation. What it does:

• Seals the refrigerator door to maintain internal temperature and efficiency
• Prevents warm air infiltration that can cause frost buildup or soggy/soft food
• Reduces energy waste from a compromised door seal
• Helps stop moisture and odors from entering the cabinet

• Remove the old gasket and clean the gasket channel before installing the new seal
• Start at the top corner and work around the door, ensuring the gasket seats fully in the channel
• If needed, warm the gasket slightly (with a hair dryer on low) to help it conform—use caution and avoid overheating
• Check the door alignment and hinge adjustment if gaps persist after installation; disconnect power before performing adjustments

This support mounting bracket secures internal components to the appliance chassis, restoring stable alignment and reducing vibration or rattling. Use it to replace a worn or broken bracket and help maintain proper part positioning. What it does:

• Holds and stabilizes internal assemblies or panels to the appliance frame
• Stops excessive movement that can cause rubbing, noise, or misalignment
• Restores mounting points needed for proper operation of connected parts
• Fits in locations where a small stamped/plastic bracket is required

• One support (mounting bracket) as shown

• Inspect surrounding fasteners and panels; replace any damaged screws or clips
• Use correct hardware and torque; avoid over-tightening which can crack bracket or panel
• Disconnect power before accessing internal areas; follow appliance-specific safety steps

This refrigerator door gasket creates an airtight seal around the door to help keep cold air in and maintain consistent temperatures. Replacing a worn or torn gasket restores proper sealing and improves cooling efficiency. What it does

• Seals the refrigerator/freezer door to prevent warm air infiltration and cold air loss
• Helps reduce frost buildup and keeps food fresher by maintaining stable temperatures
• Can reduce compressor run time and improve energy efficiency when sealing is restored
• Addresses common symptoms like warm spots in the compartment, visible gaps around the door edge, or excessive condensation/frost

• One door gasket

• Turn off power to the appliance before starting work and empty the door area for safe access
• Remove the old gasket per the manufacturer's instructions—some gaskets use screws/clips, others use a compression-fit
• Clean the gasket channel thoroughly and align the new gasket evenly; allow a gentle warm water or hair-dryer softening if the gasket is stiff
• If mounting hardware is damaged or the door is misaligned, replace hardware or correct alignment for a proper seal

This electrical switch controls a basic on/off or signal function inside the appliance to restore normal operation of the affected circuit. Replaces a failed or worn switch to help the unit respond to user inputs. What it does:

• Opens or closes an electrical circuit to enable a component to power on or off
• Commonly used where a user or mechanism needs to trigger a function
• Symptoms it can fix: appliance not responding to a control, intermittent power to a component, or a non-functioning user control
• Works as a direct replacement for the OEM switch assembly when matching part number and connector

• Disconnect power to the appliance before starting any repair
• Handle wiring and terminals carefully; secure all connections and restore any mounting clips or screws
• Test the appliance function after installation and restore power only when safe

A replacement door lock assembly that secures the appliance door during operation and helps restore normal cycle starts and safety. Installs quickly to replace a failed or worn lock and get the appliance closing and running as intended. What it does:

• Secures the door so the appliance can start and complete cycles.
• Replaces a broken or worn lock that prevents the door from latching.
• Helps resolve symptoms like the door not staying closed, the unit not starting, or the door unlocking unexpectedly.
• Engages with the door latch mechanism to keep the door held during operation.

• Disconnect power (unplug or switch off circuit) before servicing to avoid shock or injury.
• Use basic hand tools and avoid forcing connectors; align the lock with the door strike when reinstalling.
• Refer to model-specific instructions for removal and reinstallation details.

This temperature sensor (thermistor) monitors refrigerator/freezer temperature and helps the control board regulate cooling for stable food storage. It replaces a failing sensor to restore accurate temperature readings and consistent operation. What it does:

• Measures internal air or evaporator temperature so the control board can cycle the compressor and fans correctly
• Can cause incorrect or fluctuating temperatures when failing
• Works with the appliance's control system to help maintain set temperatures

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the sensor and wiring harness gently to avoid kinking or breaking the leads
• Test with a multimeter or follow manufacturer diagnostics if you suspect a faulty sensor

This drive belt transfers motor power to the appliance's rotating components so the drum or agitator turns smoothly. Replacing a worn belt restores proper movement and reduces slipping or noise. What it does

• Wraps around the motor pulley and drum/agitator to transmit rotational force.
• Helps the drum or agitator rotate evenly for normal operation.
• Commonly linked to symptoms like a drum that won't spin, slipping or squealing noises, or burning rubber smells.
• Works as a maintenance replacement when the belt shows fraying, cracks, glazing, or loss of tension.

• One replacement drive belt.

• Disconnect power (and water if applicable) before beginning any repair.
• Follow the appliance's service manual for belt routing and tensioning; some models require removing panels or the drum/agitator assembly.
• Inspect idler pulleys, tensioners, rollers, and motor shaft for wear—replace any worn components to prevent premature belt failure.
• If you smell burning or see excessive damage, stop and verify correct part and fit before testing.

This replacement refrigerator door gasket creates an airtight seal around the door to help maintain proper temperatures and reduce energy loss. It restores a tight closing seal for better food preservation and fewer frost issues. What it does:

• Seals the refrigerator/freezer door to keep cold air in and warm air out
• Helps prevent moisture buildup and frost inside the compartment
• Reduces compressor run time by improving door sealing
• Restores proper door closure when the original gasket is cracked, torn, or warped

• One door gasket

• Replace gasket with the door open for easier access
• Clean the door flange and remove old adhesive/residue for a proper seal
• Re-seat the gasket around the full perimeter, checking for uniform contact and any trapped folds
• For safety, unplug the appliance or switch off power at the breaker before installing

This cone is a small OEM replacement part that helps position and support rotating components in the appliance for smooth operation and reduced wear. It restores proper alignment where the original cone is cracked or missing. What it does

• Centers and supports a rotating shaft or drum to maintain correct alignment
• Provides a low-friction contact surface between mating parts
• Helps prevent wobble, rubbing noises, and uneven rotation when functioning properly
• Used when the original cone is broken, cracked, or worn

• One cone

• Disconnect power before starting repairs to avoid shock or injury
• Remove access panels and any fasteners to reach the cone; keep track of hardware
• Inspect surrounding bearings, seals, and shafts for wear and replace if damaged
• Use appropriate hand tools; do not force parts—if fit is tight, verify orientation before applying pressure

This refrigerator water filter cartridge reduces common taste and odor issues and captures sediment for cleaner-tasting water and ice. Designed as a direct replacement cartridge for compatible Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor to improve drinking water flavor
• Helps trap sediment and particulates to clear cloudy water or ice
• Supports consistent water quality for ice makers and dispenser use
• Can improve dispenser flow when an old filter is clogged

• 1 refrigerator water filter cartridge

• Turn off the water supply and follow your refrigerator's manual for removal and replacement steps
• Flush several gallons of water through the dispenser after installation to clear air and initial carbon fines
• Replace according to manufacturer recommendations or sooner if you notice reduced flow or worsened taste
• Dispose of the used cartridge per local recycling or waste regulations

This is a replacement mounting bolt for appliance assemblies that secures panels, brackets, or components to the cabinet. Replaces a worn or missing fastener to restore proper fit and stability. What it does:

• Secures panels, brackets, or components in place to prevent rattling or misalignment
• Restores proper fastening where an original bolt is damaged, stripped, or missing
• Helps maintain appliance stability during normal use
• Compatible with the original mounting location and hardware when the OEM part number matches

• One replacement bolt

• Use the matching thread size and torque rating; do not overtighten to avoid stripping
• Replace only with the same style and length bolt for proper fit
• Disconnect power and water (if applicable) and follow appliance safety procedures before servicing

This bushing provides a low-friction bearing surface for a rotating shaft, helping stabilize movement and reduce wear on the surrounding housing. Replacing a worn bushing restores smoother operation and reduces noise from shaft movement. What it does

• Supports and centers a rotating shaft or shaft end within the appliance housing
• Reduces metal-on-metal contact to lower noise and wear
• Helps prevent shaft wobble that can cause vibration or uneven operation
• Commonly replaced when movement is loose or when you hear scraping/rubbing noises

• One bushing

• Disconnect power (and gas, if applicable) before starting any repair
• Access the part by removing the appropriate panels per your model's service instructions
• Remove the old bushing carefully to avoid damaging the shaft or housing; press or tap the new bushing into place squarely