Parts for Ge DCD330EB3KC: 03 - Cabinet & Drum Parts

Replace missing or stripped pan head screws that fasten dryer panels, brackets, and trim. Standard #8 coarse thread, 3/8-inch length for secure assembly.

Drum glide supports the front of your dryer drum for smooth rotation. Replace when you hear scraping or squeaking sounds. Confirm fit with your model.

Supports and stabilizes the dryer drum for smooth rotation. Replace if you hear squealing, grinding, or the drum moves excessively. Confirm fit with your model.

Secures the power cord to your dryer's terminal block. Replace this bracket if it's cracked, broken, or missing to properly mount the electrical cord.

This replacement part is a ball bearing, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This ball bearing is found in dryers and is an important part of the machine as a whole, even though this part is very small. Ball bearings are a rolling element that helps carries loads, reduces friction in the machine, and positions moving parts. The main purpose is to reduce rotational friction. A new ball bearing might be needed if the user notices that additional friction is being placed on the tub of the dryer. If the ball bearings are off-balanced, it is possible that the drum of the appliance will wobble and create loud noises during the drying cycles. Be sure the appliance is cooled down before attempting to replace this part. These ball bearings are sold individually even though dryers typically have more than one. This is a genuine OEM part.

Secures the front panel on dryers. Replace if the panel is loose, rattling, or won't stay in place. Confirm fit with your model number before ordering.

Insulates the heater housing in your dryer. Replace if cracked, deteriorating, or missing to restore proper heat protection and sound dampening.

Protective cover for your dryer's terminal block electrical connections. Replace if cracked, broken, or missing to safely cover wire terminals.

The Drum Support Bearing is an OEM part for GE dryers. This part allows the smooth rotation of the dryer drum. This small yet crucial component plays a pivotal role in the dryer's operation, supporting the back of the drum as it turns, and ensuring that clothes are dried evenly and efficiently.

Over time, the drum support bearing may wear out or become damaged due to the constant friction and heat generated during the dryer's operation.  

Symptoms of a bad Drum Support Bearing include:

• A squealing or grinding noise during operation, indicating that the bearing is worn out.
• Difficulty turning the drum by hand.
• Excessive vibration or shaking of the dryer.
• Increased drying times, as a result of the drum not maintaining the correct speed due to bearing friction.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the rear drum bearing to keep your dryer drum aligned and rotating smoothly. Replace if bracket is cracked, bent, or worn to restore proper support.

Mounting screw for dryer cabinet and panel assembly. Replaces lost, stripped, or damaged screws during repairs or part installations. 10-16B x 1.375".

This is a heating element for dryers. This is the component that creates the dryer's heat. It is essential for the drying process.When the heating element stops working on a dryer, it will not produce heat. It may also produce heat, but just not enough heat. This can make the drying cycle take longer to complete. However, replacing this part is a simple task. Disconnect the power before installing this part. Wear gloves during the replacement process for safety. If the dryer is heating at all, make sure to give it plenty of time to cool down before trying to replace it. This component is sourced straight from the manufacturer. It is sold individually. This heating element with housing is compatible with dryers that are manufactured by the General Electric and Hotpoint brands. This part is made out of high-quality materials and is a durable replacement part.

Heat shield baffle that mounts to the back of the dryer drum. Replace if cracked, broken, or missing to protect drum components from direct heat exposure.

8 - 18 x 0.31

Panel mounting screw for dryers. Secures panels, brackets, and trim to the appliance frame. Replace when missing, stripped, or damaged during repairs.

Replaces a cracked, broken, or missing dryer drum baffle that lifts and tumbles clothes during the drying cycle. Restores proper tumbling action.

Dryer drum shaft support with shaft assembly. Replace if drum drops, shaft breaks, or squealing occurs from worn bearings. Verify fit with your model.

Dryer won't heat or overheats? A faulty safety thermostat fails to regulate temperature. Test for continuity with a multimeter; moderate DIY repair.

Mounting screw for dryer assembly. Secures internal components and panels. Replace if screw is stripped, missing, or no longer holding parts firmly.

Dryer overheating or shutting down unexpectedly? The high-limit thermostat monitors temperature and cuts power to prevent damage. DIY repair in 30 minutes.

Replace missing or stripped mounting screws in your washer. This 8-18 x .375 screw secures components and panels during installation or repair.

Adjustable leveling leg for freezers. Replaces worn, damaged, or missing feet to restore stable support and eliminate rocking on uneven floors.

Fix a dryer that overheats or won't heat properly. Terminal block connects power to heating elements. Common repair for welded contacts or wiring issues.

Specs: 8 - 18 ab trt 5/8 s

Door mounting screw for dryers. Secures the door assembly to the cabinet. Replace if screw is stripped, missing, or broken to restore secure door closure.