Parts for Bosch WTVC853PUC/10: Cabinet Parts

This back panel is the replacement rear cover that protects the appliance's internal components and wiring from debris and damage. It restores the unit's exterior protection and helps reduce noise from loose or exposed parts. What it does

• Covers and shields internal components, wiring and connections at the appliance rear
• Helps prevent debris, pet access and accidental contact with electrical parts
• Reduces rattling or vibration caused by a missing or damaged rear cover
• Maintains proper airflow routing and enclosure integrity for safe operation

• One back panel

• Disconnect power (unplug or shut off breaker) before starting any work
• Use appropriate tools to remove fasteners; keep original screws and mounting hardware if present
• Handle edges carefully — metal panels can be sharp
• Note or photograph locations for reassembly

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Foot is an OEM component specifically designed for select Bosch vented dryers requiring balanced tumbling motions. As an anchor point, it supports revolving drum weights during operation.

Causes requiring replacement relate to cumulative use wearing down attached glides and compromising smooth rotations. Physical damage exposing reinforcement fibers risks accelerated failure. 

Symptoms signaling the need for a new foot involve:

• Shaking or off-balanced drum movements from failed supports
• Loosened fasteners enabling unintended dislodging or displacement
• Cracked housings no longer stabilize intended weight distributions

This OEM Bosch replacement foot is also compatible with Thermador, Gaggenau and select Kenmore dryers relying on anchored rotational components. Correct installation restores intended weight balancing.
 

This replacement protective cover shields internal appliance components from dirt and moisture to help restore proper fit and reduce the risk of damage. Use it when the original cover is cracked, warped, or missing. What it does:

• Protects underlying components from moisture, debris, and accidental contact
• Helps prevent electrical shorts or corrosion caused by water intrusion
• Restores a secure enclosure and proper alignment where the original cover failed
• Fits the original mounting points to maintain intended part protection

• Disconnect power to the appliance before starting any repair
• Remove any fasteners or clips holding the old cover and replace with the new cover using the original hardware
• Verify the cover seats flush and secures to prevent gaps that allow moisture or debris
• If wiring or insulation under the cover is damaged, replace those components before reinstalling the cover

A small replacement screw used to secure panels, brackets, and other appliance components. Restores proper fastening to reduce rattling and prevent parts from becoming loose or detached during operation. What it does:

• Fastens panels, trim, brackets or assemblies in place to maintain structural fit
• Replaces missing, stripped, or corroded screws that cause rattling or loose parts
• Helps restore normal operation by keeping components aligned and secure
• Works wherever the OEM screw specification and thread fit this mounting point

• Disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver and size to avoid stripping the head
• Tighten snugly but avoid overtightening, which can strip threads or crack plastic
• Verify threads and length match the original part before final installation

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

This inner door frame is the metal/plastic support that mounts behind the outer door panel to hold the inner liner, latch, and components in place. Replacing a damaged frame restores proper door alignment and sealing. What it does:

• Provides structural support for the dishwasher door assembly and mounting points for the inner liner and hardware
• Helps maintain proper door alignment so the latch closes securely
• Prevents gaps that can cause water to spray toward the control area or hinge
• Reduces door rattles and vibration from a loose or bent inner frame

• One door inner frame

• Disconnect power and water supply before beginning work
• Remove exterior door panel and any attached trim to access the inner frame; keep track of fasteners
• Handle edges and clips carefully to avoid cutting yourself or damaging the door finish

The Door Latch is an OEM part for Bosch dryers. It securely fastens the dryer door closed during operation to prevent heat loss and ensure optimal drying performance. 

Causes of a bad latch include wear and tear over time, damage due to repeated use, or failure of the latch mechanism. 

Symptoms of a bad door latch include:

• The door not fully closing or latching in the locked position
• The door popping or coming open during a cycle  
• Decreased drying efficiency due to air leaks
• Safety issues from an unsecured door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly