Parts for Frigidaire FPRU19F8WF5: Cabinet Parts

This replacement door hinge restores proper door alignment and smooth opening on compatible refrigerators. It secures the door to the cabinet and helps maintain a tight seal for reliable cooling. What it does:

• Supports the refrigerator door and keeps it aligned for smooth opening and closing
• Helps the door form a proper seal to prevent cold air loss
• Replaces worn, bent, or noisy hinges that can cause sagging or misalignment
• Addresses symptoms like a drooping door, rubbing or scraping when opening, and uneven gaps

• Disconnect power to the appliance or unplug it before starting work
• Support the door while removing hinge fasteners; have a helper available for larger doors
• Use the correct tools and tighten hardware to manufacturer torque specs when reassembling
• Replace hinge hardware or trim if damaged to ensure proper fit and sealing

The Hinge Assembly is an OEM part for Frigidaire refrigerators. It is responsible for securely attaching the refrigerator door to the main body of the appliance, allowing for smooth opening and closing.

A bad door hinge assembly can be caused by wear and tear, damage, or improper handling. When the hinge assembly becomes faulty, it can result in issues such as a loose or sagging door, difficulty in opening or closing the door, or improper sealing, leading to temperature fluctuations inside the refrigerator.

Symptoms of a bad door hinge assembly include:

• Door not staying securely closed
• Excessive movement or wobbling of the door
• Difficulty in opening or closing the door 

Replace your faulty refrigerator door hinge assembly with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Hinge Assembly is an OEM part for Frigidaire refrigerators. It is responsible for securely attaching the refrigerator door to the main body of the appliance, allowing for smooth opening and closing.

A bad door hinge assembly can be caused by wear and tear, damage, or improper handling. When the hinge assembly becomes faulty, it can result in issues such as a loose or sagging door, difficulty in opening or closing the door, or improper sealing, leading to temperature fluctuations inside the refrigerator.

Symptoms of a bad door hinge assembly include:

• Door not staying securely closed
• Excessive movement or wobbling of the door
• Difficulty in opening or closing the door 

Replace your faulty refrigerator door hinge assembly with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Freezer Leveling Leg is an OEM part for Frigidaire upright freezers. It stabilizes and balances the appliance on uneven surfaces.

Causes relate to typical bearing wear from years of weight support. Rust forms without protective finish. Cracks develop from impact damage.

Symptoms of compromised leveling legs include:

• Excessive vibrations, noise or shaking during compressor operation
• Doors that no longer close or seal properly
• Ice maker malfunctions on frost-free models

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement nut is a factory fastener used to secure components in compatible appliances. Replacing a stripped, rounded, or missing nut restores a tight hold, reduces vibration, and helps keep assemblies properly aligned during operation.

• Threads onto a bolt or stud to clamp parts together
• Maintains correct spacing and alignment of brackets, panels, or moving parts
• Helps resolve symptoms like loose or rattling parts and excess vibration
• Ideal when original hardware is worn, damaged, or missing

• Disconnect power before servicing; shut off gas or water supply if applicable
• Match to the existing hardware and start threads by hand to avoid cross-threading
• Tighten securely without overtightening; follow any model-specific torque guidance
• Reinstall any original washers or spacers in the same order

The Leveling Foot is an OEM part for Frigidaire refrigerators. Each adjustable foot plays an important role in properly distributing weight and providing a stable foundation for the refrigerator cabinet. Level installation is crucial for doors to seal correctly and cooling components to function efficiently.

Symptoms of faulty or improperly adjusted leveling feet include: 

• Doors that do not close or seal completely, allowing cool air loss  
• Vibrations transferring to flooring from an unbalanced refrigerator
• Potential strain and damage to drawers, shelves, or internal racks over time

Causes may involve normal wear of threaded plastic and steel over many years or inadequate leveling during initial installation.

Replace them with these genuine Frigidaire feet to restore safe, optimized operation. Adjust as needed to keep doors flush and racks even. Compatible with some Electrolux, Gibson, and Kenmore models for hassle-free fixes. 

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

This interior refrigerator lamp provides replacement lighting for the fresh-food compartment so you can see contents clearly and check temperature/food without fumbling in the dark. What it does:

• Replaces a burned-out or flickering interior fridge light so the compartment is illuminated
• Helps you quickly find items and inspect food condition without opening the door longer than necessary
• Restores normal operation when the light does not turn on or is dim
• Fits into the fridge's interior lamp socket and functions with the existing switch assembly

• Disconnect power to the appliance before replacing the lamp to avoid shock
• Allow the old bulb to cool before removing; use a cloth or gloves to handle the new bulb
• Install only the correct lamp type for your model; do not force or overtighten the bulb

This light assembly replaces a damaged or non-working interior fridge lamp to restore safe, even illumination so you can find food and check temperatures. Designed to match the original fit and electrical connection. What it does:

• Provides interior lighting when the refrigerator door is opened
• Replaces cracked lens, damaged socket, or a loose housing that causes flickering or no light
• Helps improve visibility for shelves, drawers and controls near the light
• Works with the existing bulb and wiring harness used by the original assembly

• Disconnect power to the appliance before starting any repair
• Remove the old lens/housing per your model's service instructions and unplug the connector from the socket
• Handle bulbs and lens carefully to avoid breakage; wear gloves and eye protection

This harness with reed switch detects a magnetic field and provides a ready-made wiring connection for the appliance's door/sensor circuit, restoring reliable sensing and signal routing. What it does

• Contains a reed (magnetic) switch in-line with a multi-conductor harness to detect open/closed or presence/absence of a magnetic field
• Replaces a damaged or faulty sensor harness that can cause intermittent or no signal to the control board
• Common symptoms: appliance not sensing door/cover, controls not responding, or features tied to the sensor fail to activate
• Designed to mate with the factory connector set and routing used by the original equipment

• One complete harness with reed switch

• Verify power is disconnected before accessing wiring or replacing the harness
• Handle the reed switch and connectors gently to avoid damage; secure harness with original clips or fasteners

The Thermistor is an OEM part for Frigidaire refrigerators and freezers, designed to accurately monitor and control the temperature within the appliance. This sensitive component reacts to temperature changes by altering its resistance, providing feedback to the control board to regulate the cooling and defrost cycles.  

Causes of thermistor failure can include physical damage, electrical failures within the circuit, or aging, which affects its accuracy and responsiveness.

Symptoms of a bad Thermistor include:

• Unusual temperature fluctuations in the refrigerator or freezer
• The appliance is constantly running or not cooling efficiently
• Error codes displayed on the refrigerator's control panel indicating thermistor problems
• Buildup of frost in the freezer or condensation in the fridge

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water inlet valve controls the flow of water from the household supply into the refrigerator for the ice maker and dispenser, restoring water delivery when the original valve fails. Easy replacement for common flow and leak issues. What it does:

• Opens and closes to allow water into the icemaker and dispenser when needed
• Stops water flow to prevent overfilling or continuous flow when faulty
• Commonly replaced when water does not dispense or ice production stops
• Can be the source of slow fill, intermittent flow, or visible leaks at the valve area

• One water inlet valve

• Disconnect power and shut off the water supply before starting work
• Drain remaining water from lines and catch any residual with a towel
• Verify fittings and tubing are seated and tightened to prevent leaks after install

This rigid refrigerator tubing routes water inside the appliance to the dispenser, ice maker, or internal components, helping maintain a steady water supply and prevent leaks when intact. What it does:

• Carries water between the inlet, valve, ice maker, dispenser, or internal components.
• Restores water flow when original tubing is cracked, pinched, or blocked.
• Prevents pooling or dripping caused by damaged internal water lines.
• Helps stop intermittent or complete loss of water to the dispenser/ice maker when replaced.

• One replacement tube as pictured.

• Turn off the water supply and unplug the appliance before starting any work.
• Use proper fittings and hand-tighten connections; replace damaged clamps or seals.
• Inspect adjoining components (valve, fittings, connectors) for damage while replacing tubing.

This inner oven door glass provides the clear, heat-resistant panel that fits inside the oven door to restore visibility and help contain heat. Replaces a cracked, cloudy, or broken inner door panel so the oven door functions safely. What it does:

• Serves as the inner glass panel for the oven door, keeping heat in while allowing you to see inside
• Replaces cracked, chipped, or fogged glass that can reduce visibility or compromise the door seal
• Helps maintain proper oven performance by restoring the door's thermal barrier
• Matches OEM fit and mounting locations for a direct replacement

• One inner oven door glass panel (quantity: 1)

• Disconnect power to the range and ensure the oven is completely cool before beginning
• Handle glass with heavy-duty gloves to avoid cuts; set on a padded surface to prevent damage
• Some disassembly of the oven door is usually required; keep track of screws and clips

This control panel is the front console assembly that houses the oven's buttons, keypad, and display, restoring user control and visible status for cooking functions and timers. What it does

• Provides the user interface for oven controls, including buttons/keypad and display.
• Restores response when touch keys or selections stop working.
• Returns visible status and timer/readout when display is blank or faded.
• Helps resolve intermittent or unresponsive front-panel behavior.

• Disconnect power to the appliance before starting any work to avoid shock.
• Basic hand tools are typically required; handle the display and ribbon/connectors carefully.
• Reattach all connectors securely and verify operation before closing the range back up.

The PC Board is an OEM part for Frigidaire refrigerators. As the central control unit, this microprocessor-based board works behind the scenes to regulate all refrigerator functions and features. Proper board functioning is essential for reliable performance.

Causes of failure include issues beyond normal operation like power surges, physical impact, or spilled liquids contacting board circuitry. Manufacturing errors are also possible in a small percentage of units.

Symptoms of a faulty PC board include:

• Refrigerator failing to cool or completely unresponsive  
• Lights or ice/water features inoperative despite replacing other parts
• Issues occurring consistently across multiple cycles or uses
• Strange electrical noises or burning smells

This genuine Frigidaire replacement board restores core cooling and control abilities from shelf to shelf. It prevents further part replacement trial and error. Compatible with some Electrolux, Kenmore, and KitchenAid models.
 

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

The Filter is an OEM part for Frigidaire refrigerators. This water filter is designed to reduce contaminants and impurities from your refrigerator's water and ice supply, ensuring you have access to clean, fresh-tasting water and ice at all times. The filter targets a wide range of waterborne contaminants, including lead, mercury, chlorine, pesticides, and pharmaceuticals, without removing beneficial fluoride.

Regularly replace your refrigerator's water filter every 6 months to maintain optimal water quality and flow. Prevent clogs for effective filtration.

Symptoms that indicate it's time to replace the FPPWFU01 Filter include:

• Noticeable decrease in water flow from the dispenser
• Unusual taste or odor in the water or ice
• The refrigerator's water filter indicator light turns on
• It has been more than 6 months since the last filter replacement

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Fan Motor is an OEM component for Frigidaire refrigerators. Located inside the refrigerator compartment, this specialized motor powers airflow and circulation through ducts within the cabinet.

Causes of a malfunctioning fan motor can include normal wear from constant operation, collecting debris that causes imbalance or binding, and motor winding failure over extended use.  

Symptoms requiring replacement are: 

• Reduced/insufficient air circulation within the refrigerator  
• Abnormally high temperatures or frost accumulation
• Loud buzzing or grinding noises emanating from the motor

This OEM part fits Electrolux, Gibson, Kelvinator and select Kenmore models as well for a direct fit. Replace promptly for dependable fan performance.

This replacement refrigerator drawer assembly restores a smooth, sturdy bin for organizing food items. Replace a cracked, warped, or missing drawer to regain usable storage space and proper sliding action. What it does

• Provides a sliding storage bin inside the refrigerator compartment
• Keeps items contained and organized to help prevent spills
• Restores proper fit and smooth glide when matched with undamaged rails
• Typical symptoms: cracked or broken drawer, hard to open/close, falls off tracks, won't stay seated

• 1 drawer assembly

• Disconnect power and remove contents from the drawer area
• Fully extend the old drawer, lift the front, and pull to remove from the rails/glides
• Move any removable inserts from your original drawer to the new one if required by your model
• Align the new drawer with the rails and slide it in until it seats and moves smoothly; restore power

This shelf assembly provides a stable, flat storage surface inside the refrigerator so food and containers sit level and stay organized. Replaces a cracked, chipped or sagging shelf to restore usable shelf space and easy cleanup. What it does:

• Supports food, beverages and containers on a flat, stable surface
• Replaces shelves that are cracked, chipped, scratched or no longer level
• Restores safe weight-bearing capacity and prevents items from sliding
• Helps maintain an organized refrigerator interior and simplifies cleaning

• Remove all items from the shelf and lift straight out of the support tracks to remove; reverse for installation
• Check that shelf grooves align with the refrigerator support rails before seating the shelf
• Wear cut-resistant gloves when handling broken glass or damaged edges
• No special tools typically required; refer to your model-specific service information

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This replacement drawer assembly restores a damaged or missing refrigerator storage drawer so you can store and organize food properly. It fits into the factory tracks and restores a functional sliding storage compartment. What it does:

• Replaces a cracked, broken, or missing refrigerator storage drawer to restore usable interior storage.
• Slides on factory rails to allow easy access to stored foods and produce.
• Helps contain spills and keep items organized inside the refrigerator compartment.
• Matches OEM shape and mounting points for a direct-fit replacement when the original drawer is damaged.

• Disconnect power to the appliance before starting any repair to reduce risk of electrical shock.
• Remove all contents and existing damaged drawer before installing the replacement.
• Align the drawer with the cabinet rails and slide into place; no special tools typically required.
• Handle trim and mounting points carefully to avoid cracking the plastic; do not force parts into position.

The Shelf Assembly is an OEM part for Frigidaire refrigerators. This part offers a durable and stable surface for storing food and beverages within the appliance. This assembly typically includes a complete shelving unit, often comprising the shelf itself along with any necessary supports or brackets that facilitate installation and stability.  

Over time, refrigerator shelves can face wear and tear from heavy use, accidental overloading, or impact, leading to potential damage such as cracking, warping, or breaking. 

Symptoms of a bad Shelf Assembly include:

• Visible cracks or breaks in the shelf material
• Sagging or bending under weight, indicating weakness
• Difficulty fitting the shelf into its designated slot
• The shelf coming loose or failing to remain securely in place

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location

This slide assembly is the replacement drawer slide that supports smooth opening and closing of a refrigerator drawer or bin. It restores proper drawer alignment and reduces binding so drawers operate reliably. What it does:

• Provides a guided track for a single refrigerator drawer or bin to slide in and out smoothly
• Replaces worn or damaged slides that cause drawers to stick, sag, or not seat fully
• Helps restore proper drawer alignment and prevents rubbing or jamming against the cabinet
• Works as a direct-fit replacement when the OEM part number matches

• One slide assembly

• Remove power to the appliance if working near electrical components; follow the refrigerator's service manual
• Typically installs with a few screws; keep existing hardware if reusable unless damaged
• Inspect mating hardware and drawer for damage and replace as needed for proper function

This slide assembly replaces a worn or damaged drawer glide so freezer or refrigerator drawers open and close smoothly. It restores proper drawer alignment and prevents the drawer from sticking or dropping. What it does:

• Guides the drawer along the cabinet track for smooth, stable motion
• Replaces broken or bent slides that cause sticking or uneven movement
• Helps stop drawers from falling out or misaligning when pulled
• Reduces grinding or scraping noises caused by damaged rails

• One slide assembly

• Disconnect power and remove food and drawers before starting work
• Use basic hand tools; match the new slide to the old one and follow the appliance's service diagram
• Keep fasteners and clips from the original assembly; reuse if undamaged and specified by the diagram
• Get a helper to avoid injury

This lamp assembly replaces a failed or damaged refrigerator interior light to restore reliable illumination for the fresh-food compartment. Designed to mount in the existing lamp housing and provide a finished lens and socket in one piece. What it does:

• Houses the interior light and lens to protect the bulb and diffuse illumination
• Restores interior lighting when the lamp is burned out, dark, cracked, or missing
• Prevents glare and concentrates light toward shelves and drawers for better visibility
• Helps ensure the light switches and connections are correctly positioned for normal operation

• Disconnect power to the appliance before replacing the lamp to avoid shock
• Use care when handling the lens and bulb; wear gloves if glass is exposed
• Test the light after reassembly; if it still does not work, check the bulb and wiring/door switch

The Frig Freshness Booster Refill is an OEM part for Frigidaire refrigerators. This refill helps maintain freshness by absorbing and removing odors from the refrigerator.

Causes of needing a new refill include the natural depletion of the absorption material over time through repeated use and odor elimination. Refills are intended to be replaced periodically to ensure optimal freshness performance.

Symptoms of a refill needing replacement include:

• Lost ability to fully absorb odors
• Deterioration or break down of the absorption material
• Excessive build up of odors inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

A replacement shoulder screw that secures internal panels and components for proper alignment and stable operation. Fits applications that use a hi-lo quadrex head and M4.2 x 1 thread for a precise fit. What it does:

• Provides a fixed shoulder for spacing and alignment of panels or moving parts
• Holds components together to prevent shifting, rattling, or misalignment
• Restores secure fastening when the original screw is stripped, damaged, or missing
• Works where a hi-lo quadrex head is required for proper driver engagement

• Disconnect power to the appliance before beginning any repair
• Use the correct quadrex driver bit to avoid cam-out or head damage
• Thread carefully and do not overtighten; excessive torque can strip threads or deform mating parts
• Keep removed hardware and panels organized for proper reassembly

This flexible hose routes water between components to drain or supply fluid, helping maintain normal appliance operation and prevent leaks or backups. Use when a worn, cracked, or leaking hose affects drainage or water flow. What it does:

• Carries water to or from a component to allow proper draining or water supply
• Prevents leaks when intact; cracked, split, or collapsed hose can cause visible leaking or poor drainage
• Restores reliable water flow when original hose is clogged, damaged, or deteriorated
• Works as a direct replacement for the same OEM hose design and routing

• One replacement flexible hose as shown

• Disconnect power and water supply before starting any repair
• Inspect connections and clamps; replace clamps if corroded or damaged
• Route the hose in the same position as the original to avoid kinks; secure with proper clamps

This refrigerator shelf spacer positions and supports a shelf so it sits secure and level. Replacing a worn or missing spacer helps eliminate wobble or shifting and restores proper fit and alignment inside the compartment. What it does

• Maintains correct spacing and alignment for the shelf
• Helps keep the shelf level and secure in its track or frame
• Replaces cracked, deformed, or missing spacers
• Symptoms can include a loose, tilted, or rattling shelf, or visible gaps where the shelf should seat

• One shelf spacer

• Disconnect power to the refrigerator before servicing
• Remove the shelf to access the spacer location
• Gently pry out the old spacer; avoid stressing plastic or glass components
• Press the new spacer firmly into place and reinstall the shelf, ensuring proper orientation

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw