Parts for Ge GTH18ECT3RBB: 02 - Cabinet Parts

Mounting bracket that secures shelves and internal components in your refrigerator. Replace if cracked, broken, or missing to keep shelves stable and prevent shifting.

Replacement freezer step shelf for top-mount refrigerators. Installs in freezer compartment to organize food storage. Replace if cracked, broken, or missing.

Replacement crisper drawer for refrigerator fresh produce storage. Installs in lower refrigerator compartment. Order if your drawer is cracked or broken.

Replacement glass panel for refrigerator shelves. Restores storage space when original glass is cracked, broken, or missing. Creates a stable surface.

Clear plastic cover that sits over crisper drawers to maintain humidity. Replace if cracked, broken, or warped. Frame only, glass shelf sold separately.

White plastic frame with glass insert that covers the crisper drawer in your refrigerator. Replace if cracked, broken, or glass is shattered. Easy install.

Leveling leg threads into the refrigerator base to support and stabilize the cabinet. Replace if cracked, broken, or worn to keep your unit level.

Rear mobility wheel mounts to the back base of your refrigerator. Replace if worn, cracked, or causing uneven rolling when moving the unit for cleaning.

The GE access cover is an OEM replacement part responsible for covering the compressor area on a refrigerator. This panel is located on the rear or bottom of the refrigerator and provides easy access to the compressor and condenser coils and prevents dirt and debris from entering the compressor area. When this part becomes damaged, it can lead to issues such as poor cooling performance, excessive noise from the compressor area, or even compressor overheating.

Symptoms of a bad access cover include:

• Visible cracks, breaks, or deformation in the cover
• Difficulty in securing the cover properly in place
• Increased dust or debris buildup inside the refrigerator
• Exposed internal components

Causes of a bad access cover can include accidental impacts, wear and tear from frequent removal and reinstallation, and environmental factors like temperature fluctuations or moisture exposure.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secure rivet for refrigerator interior panels and structural components. Replace if worn, loose, or missing to restore proper assembly and fit.

Secures the refrigerator door to the cabinet and provides a pivot point for smooth operation. Replace if cracked, worn, or causing misalignment.

Rear rail support plate for refrigerators. Mounts inside the cabinet to support shelving rails. Replace if cracked, broken, or missing for stability.

White plastic corner cap that snaps onto refrigerator door corners to conceal fasteners and protect hinge areas. Replace if cracked, broken, or missing.

Black corner cap cover for top-mount refrigerators. Replaces cracked, broken, or missing corner trim pieces. Installs on exterior cabinet edges.

Small washer that fits on refrigerator door hinges to distribute weight and reduce friction. Replace if worn, cracked, or missing to restore proper alignment.

Replaces a worn, cracked, or damaged bottom door hinge on your refrigerator. Restores proper door support, alignment, and pivot function for smooth operation.

Bottom hinge bracket that pivots and supports the refrigerator door. Replace if cracked, broken, or causing door misalignment, sagging, or uneven gaps.

Positions refrigerator door components with correct clearance for smooth swinging and level alignment. Replace if worn, cracked, or missing to restore fit.

Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.

Left hand gusset bracket for refrigerators. Structural support piece that mounts inside the cabinet. Replace if cracked, bent, or missing.

Structural bracket that reinforces refrigerator door or drawer frames. Replace when the original gusset is cracked, broken, or worn to restore alignment.

Insulating foam duct that directs cold air from the evaporator through the fresh food compartment. Replace if cracked, compressed, or missing.

Channels cold air from the evaporator fan through the freezer compartment. Replace if cracked, broken, or missing to restore proper airflow seal.

Air duct gasket seals the air passage in your refrigerator to maintain proper airflow and temperature. Replace if torn, compressed, or causing cooling issues.

Ice overflowing freezer or ice maker won't shut off? Replace the missing or broken ice bucket. Installs in minutes, no tools required.

Replace your broken, chipped, or missing refrigerator cantilever half-glass shelf. Restores storage space and organization inside your fridge.

Replacement glass shelf for refrigerator storage compartments. Restores a level surface for food and containers when original is cracked, broken, or missing.

Rubber bumper that cushions and mounts the evaporator fan motor assembly. Replace if cracked, deteriorated, or missing to reduce vibration and noise.

Replacement mounting screw for refrigerator shelves, drawers, and internal components. Needed when screws are lost, stripped, or damaged during repairs.

Hex head screw for securing interior panels, control covers, and components inside your refrigerator. Replace missing, stripped, or damaged screws.

Replacement mounting screw for refrigerator interior components. Needed when original hardware is stripped, missing, or damaged during repairs or maintenance.

Fixes noisy fan, ice buildup, or warm fridge temps. This evaporator fan motor circulates cold air between compartments. DIY-friendly repair, 1 hour.

Mounts the evaporator fan assembly inside the freezer compartment. Replace if cracked, broken, or damaged from repeated fan motion or temperature stress.

Rear mounting bracket that secures the evaporator fan in your refrigerator. Replace if bracket is cracked, bent, or broken, causing fan misalignment.

Refrigerator not cooling evenly or making noise? The evaporator fan blade circulates cold air. Simple press-on installation in under 30 minutes.

Rubber grommet that seals and cushions where the evaporator fan motor shaft mounts. Replace if cracked, worn, or missing to eliminate noise and vibration.

Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.

Replace missing or stripped dishwasher mounting screws. Secures internal components and panels. Essential hardware for reassembly after repairs.

Hex washer head screw for refrigerator assembly. Secures internal components like fan housings and panels. Replace if stripped, missing, or damaged.

Secures brackets, panels, trim, and covers inside your refrigerator. Replace this screw if stripped, missing, or damaged to restore tight assembly.

Replacement 8-18 x 3/4 machine screw for securing access panels, mounting brackets, and small assemblies. Needed when original hardware is stripped or missing.

Replace missing or stripped mounting screws in your refrigerator. This screw secures internal components and panels. Essential for reassembly after repairs.

Ice maker not filling or water dispenser not working? This refrigerator water inlet valve controls water flow to both. DIY install in 10 minutes.

Secures trim and panels in your refrigerator. Replace when broken clips cause loose parts or rattling. Verify fit with your model number.

Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.

Plastic water line that connects the water inlet valve to the ice maker. Replace if cracked, leaking, or damaged. Includes installation video.

Secures water lines and wiring inside your refrigerator to prevent vibration, rubbing damage, and leaks. Replace if broken or missing. Confirm fit.

Secures water tubing or wiring to your refrigerator cabinet. Replace if missing or damaged to prevent vibration, rubbing, or leaks. Confirm fit.

Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.

Ice maker not filling or water spilling? This fill cup directs water into the ice maker mold for proper ice production. Simple clip-on install.