Parts for Ge GTS12BBMBRCC: 02 - Cabinet Parts

Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.

This ice maker receptacle cover protects the electrical connector and housing where the ice maker plugs into the refrigerator, helping keep the connection clean and secure for reliable ice maker operation. What it does

• Covers and shields the ice maker electrical receptacle from debris and moisture
• Helps prevent accidental contact with the connector for improved safety
• Maintains proper alignment and fit of the ice maker plug to reduce connector strain
• Commonly replaced when cracked, broken, or missing, which can expose the receptacle

• Disconnect power to the appliance before inspecting or replacing the cover
• Usually snaps or screws into place; remove adjacent trim or ice bin for access if needed
• Handle gently to avoid damaging surrounding plastic housings or the connector
• If electrical damage or corrosion is present, inspect wiring and connector; replace damaged parts before reassembly

This control housing is the outer console shell that holds and protects the refrigerator's user controls and display, restoring a secure mounting surface and clean appearance for the front control area. What it does:

• Supports and secures the control board, buttons and display assembly in the front console
• Protects internal electronics from light impacts and everyday wear
• Helps keep buttons and touchpads aligned for reliable operation
• Replaces cracked, warped or damaged console housing that lets controls sit loose or exposed

• One control housing

• Disconnect power to the appliance before beginning any repair
• Remove surrounding trim and electronics carefully to avoid damaging wiring or the control board
• Handle the housing gently to avoid cracking plastic; align clips and screw holes before fastening

This screw is a factory replacement fastener used to secure appliance panels and components. It restores lost or loose hardware so parts sit correctly and operate without rattling or movement. What it does

• Secures panels, brackets, and small com

This is a replacement mounting screw used to secure panels, trim, and small components on compatible appliances. It provides a simple, durable fix when original fasteners are missing or damaged. What it does:

• Secures control panels, trim pieces, brackets, or other appliance components
• Restores proper fit and prevents rattling or loose parts
• Replaces missing, stripped, or corroded screws to maintain safe operation
• Works wherever the OEM-specified screw is required by the manufacturer

• One replacement screw

• Turn off and unplug the appliance before beginning any repair
• Use the correct screwdriver or driver bit to avoid striping the head
• Keep small parts away from children and pets; store extras in a safe place

Replacement 8-18 x 1/2 inch screw for ice machines, refrigerators, and washer dryer combos. Secures panels and components. Order new screw if lost or stripped.

Secure refrigerator clamp holds hoses, wires, or tubing in place. Replace if cracked, broken, or components are loose. Verify fit with your model number.

Refrigerator not cooling or ice building up on evaporator coils? The defrost timer controls the defrost cycle. DIY-friendly, installs in 5 minutes.

This evaporator cover protects the refrigerator's evaporator area and channels airflow for proper cold distribution. It helps shield coils and components from damage and limits ice buildup that can impair performance. What it does:

• Protects evaporator coils, fan and defrost components from accidental contact and debris
• Directs airflow over the evaporator for more even cooling in the compartment
• Helps reduce localized frost buildup that can indicate airflow or defrost issues
• Commonly replaced when cracked, broken mounting tabs prevent secure fit, or airflow is disrupted

• One evaporator cover

• Disconnect power before beginning any repair to avoid shock or compressor damage
• Remove interior panels and shelves as needed to access the evaporator area; retain fasteners for reassembly
• Inspect mounting tabs and surrounding seals; replace damaged clips or retainers for a secure fit
• Handle gently to avoid cracking the plastic

Refrigerator not cooling or freezer warm? A failing evaporator fan motor stops cold air circulation. This kit restores proper airflow and temperature control.

Secures the condenser fan motor in position. Replace this bracket if cracked, bent, or causing excessive vibration to restore stable mounting.

Replace your refrigerator's evaporator fan bracket if it's cracked, broken, or missing. This mounting bracket secures the evaporator fan in place.

Secures the defrost heater in place inside your refrigerator. Replace if the strap is cracked, broken, or missing to properly hold the heater assembly.

Fix frost buildup and warm fresh food section with this clip-on defrost thermostat. Restores automatic defrost cycles. Moderate DIY repair.

Ice tray for your refrigerator's freezer compartment. Replace if cracked, broken, or missing to restore ice storage functionality in your appliance.

Refrigerator drier filter that removes moisture from the sealed refrigeration system. Replace if your unit's drier is clogged, corroded, or damaged.

This rubber tube grommet cushions and protects a refrigerator water/tubing passage, helping prevent chafing and leaks where a tube passes through the cabinet. It's a simple replacement to restore a secure seal. What it does

• Cushions tubing where it passes through sheet metal or a cabinet panel to reduce wear.
• Helps keep the water/tube routing sealed and stable to minimize rubbing and potential leaks.
• Commonly replaced when the original grommet is cracked, split, or missing.
• Small, inexpensive part that prevents damage to lines and reduces vibration noise.

• One rubber tube grommet.

• Disconnect power and shut off the water supply before beginning any repair.
• Access location varies by model; remove panels or liners as needed to reach the tube/pass-through.
• Replace the damaged grommet by sliding the tube through the grommet and seating the grommet into the cabinet hole.
• Inspect tubing for damage while installing; replace tubing if abrasion or leaks are found.

The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.

You should replace the light socket if it b

Fix a refrigerator that won't cool or runs constantly with this compressor kit. Essential for restoring proper cooling in refrigerators and freezers.

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator

Fridge won't cool and makes clicking sounds? The compressor overload may have failed. Protects against overheating. DIY repair takes 15-45 minutes.