Parts for Ge GFW148SSL0WW: Cabinet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replace a missing or corroded ground screw to restore proper electrical grounding. Prevents shock hazards and ensures safe appliance operation. Quick fix.

This is an electrical line filter assembly that mounts inline on the washer's power supply wiring. It suppresses electromagnetic interference (EMI) generated by the motor and electronic controls, protecting both the appliance and nearby electronics. Replace this part if you experience erratic control board behavior, electrical noise on nearby devices, or if the filter shows visible damage such as burn marks or cracking.

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

If your washer won't start or shows a door lock error, this door lock assembly securely latches the door during cycles. Moderate DIY repair.

This manual door unlock strap is the replacement strap that lets you manually release a stuck appliance door latch, restoring access when the electronic unlock doesn't operate. It provides a simple, serviceable way to open a locked door without replacing the whole latch assembly. What it does:

• Provides a manual pull method to release a stuck or locked door latch.
• Commonly used when the control or lock mechanism fails to disengage electronically.
• Helps you regain access to the appliance without waiting for parts or service.
• Works as the OEM replacement strap specified for the latch assembly.

• One manual door unlock strap.

• Disconnect power to the appliance before starting any service to avoid shock or injury.
• Access may require removing an access panel or inner door trim; keep track of screws and fasteners.
• Inspect the latch assembly while replacing the strap and replace any damaged fasteners or clips.

This top panel guide pin screw secures the appliance top panel and keeps the panel aligned during use. It replaces a missing or damaged guide screw to reduce panel movement and rattling. What it does:

• Secures the top panel to the chassis so the panel stays aligned
• Prevents the top panel from shifting, vibrating, or rubbing during operation
• Restores proper fit after a stripped, lost, or damaged screw

• Disconnect power to the appliance before starting any repair
• Remove the top panel or access panel to reach the guide pin location
• Install by hand to align, then tighten snugly with the appropriate screwdriver; avoid over-tightening to prevent strip-out
• If threads are damaged, inspect the mounting hole and replace or repair the threaded insert as needed

This is a ST3.5 x 12 self-tapping screw designed to secure trim, panels, and small appliance components. It replaces stripped or missing screws to restore proper fit and reduce movement or vibration. What it does:

• Fastens appliance panels, brackets, or trim where ST3.5 x 12 screws are specified
• Helps stop rattling, loose panels, or parts that shift during operation
• Provides a secure threaded hold in thin sheet metal or plastic mounting points
• Matches OEM fit where the WH02X26267 screw is specified

• Use the properly sized Phillips driver to avoid cam-out and head damage
• Start screws straight and apply steady pressure; do not over-torque to prevent stripping
• Wear eye protection when working with small fasteners and sharp edges
• Compare size and thread to ensure a proper match

Replace your washer's front panel if it's cracked, dented, or damaged. This exterior panel covers the front of your washing machine's cabinet and frame.

This door hinge mounting plate secures the refrigerator door hinge to the cabinet, restoring hinge alignment and proper door operation. It's a direct-fit replacement that helps stop door sag and improves sealing. What it does:

• Provides a secure mounting point for the door hinge assembly on the cabinet
• Restores proper door alignment to help the door close evenly and seal correctly
• Stops hinge wobble or looseness that can cause uneven wear or gaps
• Helps address symptoms like door sagging, rubbing, or uneven closing

• Unplug the appliance or turn off power before beginning work.
• Support the door while removing hinge hardware to prevent dropping or damage.
• Use the correct hand tools and fasteners; avoid overtightening to prevent striping.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

A small metal retaining washer that helps secure a fastener and resists loosening from vibration. Replaces the worn or missing washer that can allow mounting hardware to back off and components to shift. What it does:

• Holds nuts or bolts tight by locking the mating fastener in place
• Helps prevent vibration-related loosening that can cause rattles or part movement
• Secures panels, brackets, or assemblies so connected parts stay aligned
• Common symptom: loose or noisy components near the washer location

• Disconnect power and follow appliance-specific safety procedures before servicing
• Use the correct size and orientation of washer as shown in the appliance parts diagram
• Replace only with the same style and fit to ensure proper locking action
• Replace them as well for a reliable repair

A single self-tapping screw used to secure appliance panels and trim for a stable, vibration-free fit. Replaces a lost or damaged mounting screw to restore proper part attachment and reduce rattling. What it does:

• Fastens control panels, brackets, trim pieces or small assemblies to metal or plastic surfaces
• Creates its own threads for a tight hold in sheet metal or molded openings
• Helps eliminate loose parts that can cause noise, vibration, or misalignment
• Commonly used where original screws have stripped, corroded, or been lost

• One tapping screw (quantity: 1)

• Use the correct-size Phillips or Torx driver to avoid cam-out or head damage
• Start straight and apply steady pressure; do not overtighten to prevent stripping or cracking
• Disconnect power and remove any panels before working
• If threads are damaged, replace the mating fastener or insert before installing this screw

Replace a faulty washer power control board if your machine won't start, stops mid-cycle, or shows error codes. Moderate difficulty repair.

Adjustable leveling leg raises and stabilizes your washer so it sits level. Replaces cracked, broken, or missing legs to stop rocking and wobbling.

Secures and routes the drain hose at the washer cabinet opening. Replace if cracked, broken, or missing to prevent hose kinks and abrasion damage.

This driver control board is the electronic control assembly that manages oven/range functions and user interface, restoring normal cooking operations and display responsiveness when the original board fails. What it does:

• Receives input from buttons and knobs and sends commands to heating elements, timers, and lights
• Powers and drives the control display and indicator lights
• Can cause unresponsive controls, blank or flickering display, or erratic operation when defective
• Works as the central control for oven cycle selection and timing

• Disconnect power at the breaker before starting any repair to avoid shock
• Handle the board carefully; avoid touching components and use anti-static precautions if available
• Verify connector orientation and secure all wiring harnesses before restoring power

Lower access panel that protects your laundry center's underside from debris and restores finished appearance. Replace if cracked, broken, or missing.

Fix a washer door that won't stay closed or sealed properly. This door strike latch secures the door, restoring alignment and a reliable seal.

This door plug is a small trim cap that covers exposed screw holes on the appliance door to restore a finished appearance and help keep fasteners protected from dust and grime. It's a simple cosmetic part that helps complete door trim. What it does:

• Covers and conceals exposed screw holes or hinge openings on the door
• Protects fasteners from dirt and corrosion by keeping debris out of holes
• Restores a clean, finished look to the appliance door
• Helpful when replacing door parts or trim to hide mounting points

• Push the plug into the opening until it snaps or seats flush; minimal force and no special tools usually required
• Confirm correct orientation and fit before final seating
• If removing the old plug, use a small flat tool gently to pry it out to avoid scratching surrounding trim
• Work with the door supported as needed; follow the appliance manufacturer's safety guidance and disconnect power if performing broader repairs

This lower guide pin secures and guides the lower dish rack so it slides smoothly and stays aligned. Replacing a worn or broken guide pin restores proper rack tracking and reduces rack misalignment and rough sliding. What it does:

• Guides the lower rack along its track to keep it aligned and stable
• Prevents the rack from coming off the rollers or binding during use
• Reduces scraping, grinding, or noisy movement caused by a damaged guide
• Helps ensure even loading and proper door clearance by keeping the rack positioned

• Disconnect power to the appliance before starting any repair
• Remove the lower rack and any obstructing components to access the guide pin
• Typically snaps or clips into place; may require a flat tool to remove the old pin
• After installation, run the rack to ensure smooth travel and proper alignment

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.