Parts for Ge GFW148SSL0WW: Tub Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

This outer gasket clamp secures the refrigerator door's outer gasket, keeping the door seal aligned for proper cooling and energy efficiency. It helps maintain a tight seal and reduces air leaks, condensation, and frost buildup. What it does:

• Holds the outer door gasket in position along the door frame
• Keeps the gasket edges clamped to prevent gaps that let cold air escape
• Helps reduce condensation, frost, and uneven cooling near the door
• Prevents the gasket from pulling loose or bunching during normal use

• One outer gasket clamp

• Disconnect power to the appliance before starting any repair
• Remove the door trim or inner panel as required to access the clamp
• Handle the gasket gently to avoid tearing; align clamp evenly along the gasket

This genuine replacement screw secures appliance panels and components to restore proper fit and reduce movement. It's a simple, direct fastener used where original mounting hardware has become lost, stripped, or damaged. What it does:

• Fastens panels, brackets, or trim to the appliance chassis
• Restores secure mounting to eliminate rattles or loose parts
• Replaces worn, stripped, or missing hardware with an OEM matching fastener
• Helps maintain proper alignment of control panels and access covers

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to prevent stripping the screw head
• Hand-start threads before final tightening and avoid overtightening
• Keep removed screws organized during disassembly to ensure correct reinstallation

This inner clamp secures the washer's door gasket to the front tub to maintain a tight, watertight seal. Replacing a stretched or damaged clamp helps stop leaks and keeps the gasket properly seated during wash and spin. What it does:

• Fastens the inner lip of the door gasket to the tub collar
• Maintains a watertight seal to prevent leaks at the door area
• Helps keep the gasket from slipping, wrinkling, or coming off
• Typical symptoms include water on the floor at the front, a loose/sagging boot, or a clamp that won't tighten

• 1 inner gasket clamp

• Disconnect power and turn off water supply before servicing
• Access the boot and inner clamp by removing the front panel/outer retainer as required by your model
• Note gasket orientation; seat it evenly on the tub lip, then tighten the new clamp uniformly
• After reassembly, run a short fill/rinse cycle and check for leaks

This flat washer fits with the refrigerator counterweight assembly to provide a stable, low-profile spacer and load distribution point. It helps secure the counterweight and reduces metal-on-metal wear for smoother door movement. What it does:

• Provides a flat bearing surface between the counterweight and mounting hardware
• Distributes load to prevent localized wear and help maintain door alignment
• Reduces metal-on-metal contact that can cause noise or abrasion
• Maintains proper spacing so the counterweight operates smoothly

• Follow the appliance manufacturer's service instructions and remove power before servicing
• Replace washer if bent, corroded, or worn to restore proper counterweight function
• Use the exact part number to ensure fit with the counterweight and mounting hardware

This left front counterweight stabilizes the washer drum during spin cycles to reduce vibration and movement. Replacing a damaged or loose counterweight restores balance and helps the washer run more quietly and smoothly. What it does:

• Balances the washer tub to minimize shaking and heavy vibration during high-speed spins
• Dampens movement that can cause the washer to walk or shift on the floor
• Reduces banging or knocking noises tied to an unbalanced tub
• Helps protect suspension components and bearings from premature wear

• One left front counterweight

• Disconnect power (and water if applicable) before starting any repair
• Use proper lifting support for the cabinet or tub; counterweights are heavy and can shift
• Tighten mounting fasteners to manufacturer torque specs and verify secure fit

This basket and trunion assembly replaces a damaged or worn washer tub assembly to restore drum support and smooth spin performance. It's the complete tub/basket assembly that reattaches the inner tub to the drive components. What it does

• Supports and centers the washer tub so the drum spins correctly
• Transfers rotational force from the drive to the tub via the trunion
• Helps prevent excessive vibration, wobble, and banging during spin
• Worn or damaged assembly can cause noisy operation, poor spin extraction, or tub misalignment

• One basket and trunion assembly

• Disconnect power and water to the washer before beginning any repair
• Replacement typically requires disassembly of the washer cabinet and removal of the old tub assembly
• Have basic hand tools on hand; some vehicles may require a second person to handle the tub safely

This baffle redirects exhaust airflow inside the range/hood assembly to help control ventilation and grease capture. Replaces a worn or damaged baffle to restore proper airflow and reduce smoke, steam, and lingering cooking odors. What it does:

• Channels exhaust air through the ventilation path for efficient removal of smoke and steam
• Helps direct grease vapors toward capture points to reduce buildup on cabinetry and components
• Prevents airflow obstructions that can cause poor ventilation or uneven smoke clearing
• Restores proper fit and alignment when a bent, cracked, or missing baffle is present

• Disconnect power to the appliance before installing and allow surfaces to cool
• Installation typically requires basic hand tools; handle part carefully to avoid bending
• Verify fit and orientation against existing baffle; do not force into place

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fit and helps prevent noise or loose parts caused by missing or worn fasteners. What it does:

• Secures trim, panels, or internal components to maintain proper alignment
• Helps prevent vibration and rattling from loose assemblies
• Replaces a missing or damaged screw to restore original fit
• Compatible with the factory mounting points where this screw is specified

• Always disconnect power to the appliance before servicing
• Use the correct screwdriver bit to avoid stripping the head
• Thread carefully and do not overtighten; snug until secure
• Keep small parts away from children and pets

This heating element bracket secures the oven's heating element in place so the element stays aligned during use, maintaining safe operation and consistent cooking performance. What it does:

• Anchors the bake/broil heating element to the oven cavity or rear wall to prevent sagging or movement
• Helps maintain proper element alignment for even heating
• Prevents the element from contacting other parts and reduces the chance of noise or vibration
• Commonly replaced when the element is loose, rattles, or shifts out of position

• Disconnect power at the breaker or unplug the appliance before starting
• Remove oven panels or element access cover as needed to reach the bracket
• Handle the heating element gently; avoid bending or damaging the element during installation
• Use original screws or fasteners and ensure the element is properly seated before restoring power

The Bolt is an OEM part for GE washers. This small but important part is a circular thin ring that distributes the load when tightened between a nut and the bolt head or workpiece surface. Proper washers are crucial to prevent damage and ensure secure, rattle-free connections during years of vibration. 

Causes of a bad bolt can include wear due to normal mechanical stress, or deformation from overtightening bolts.

Symptoms of a bad bolt include:

• Noisy or loose connections between cabinet panels or internal components  
• Stripped or damaged bolt threads
• Vibrations transmitted during operation
• Potential leaks around sealed areas

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replacing worn bolt washers helps reduce noise and maintain a well-built feel to the washer for long-lasting performance.
 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rotor is the rotating element from the motor assembly that enables normal mechanical operation and helps reduce noise and vibration. Replacing a worn rotor can restore proper rotation and performance. What it does:

• Spins inside the motor to transfer torque to the drivetrain or drum
• Replaces a damaged or worn rotor that can cause grinding, scraping, or loud operation
• Helps eliminate intermittent or complete loss of rotation when the rotor is the failing component
• Works as a direct-fit replacement when the OEM part number matches

• One rotor

• Disconnect power before beginning any repair to avoid shock or injury
• Replacement may require motor removal or partial disassembly
• Inspect related motor components (bearing, stator, mounting hardware) and replace as needed

This stator is the stationary motor coil that creates the magnetic field needed for the washer's drive motor to turn. Replacing a worn or damaged stator helps restore proper motor operation and movement. What it does:

• Generates the magnetic field the rotor needs to spin the drive motor
• Supports normal agitation and spin functions by enabling motor torque
• Commonly associated with symptoms such as no spin/agitate, humming, or intermittent motor operation
• Works with the motor assembly and related electrical connections to transfer power to the rotor

• One stator (motor stator coil) as shown

• Disconnect power before beginning any repair to avoid shock hazard
• Installation typically requires removing the washer cab, motor housing, and associated wiring
• Inspect the rotor, motor bearings, and wiring harness while replacing the stator
• Use proper tools and follow safety procedures

This rotor bolt and washer kit secures a rotating assembly so the rotor or drum spins reliably. It replaces a missing or worn bolt/washer to restore correct alignment and reduce noise or wobble. What it does:

• Secures the rotor or rotating assembly to the shaft to maintain proper rotation
• Prevents the rotor from loosening, which can cause vibration or wobbling
• Helps stop grinding, rattling, or metal-on-metal noise from a loose rotor
• Restores correct spacing and alignment for smooth operation

• Disconnect power (unplug the appliance or shut off breaker) before servicing
• Remove the applicable access panel or assembly
• Replace only with the exact part number to ensure fit; tighten to OEM torque if specified

This is a replacement stator mounting bolt used to secure the stator assembly to the appliance chassis, keeping the motor components firmly in place for reliable operation and reduced vibration. What it does:

• Secures the stator to the motor/chassis assembly to maintain proper alignment
• Prevents movement or loosening that can cause vibration, noise, or motor performance issues
• Restores factory mounting hardware after repair or stator replacement
• Small part that plays a key role in safe, stable motor operation

• One stator mounting bolt (quantity: 1)

• Intended for technicians or experienced DIYers; inspect surrounding hardware and mounting holes before installing
• Use the correct thread engagement and torque per manufacturer specs; do not overtighten
• Disconnect power and follow all safety procedures before accessing the motor or chassis
• Replace all affected fasteners to ensure secure mounting

A replacement suspension spring that supports the washer tub and helps reduce vibration and movement during spin cycles. Restores stable operation and quieter performance when worn or broken springs allow excessive tub motion. What it does:

• Holds and stabilizes the washer inner tub to limit wobbling and banging during spin cycles
• Absorbs and distributes tub movement caused by unbalanced loads
• Helps maintain proper drum alignment for smoother operation
• Commonly replaced when tub sags, knocks, or vibrates loudly during use

• Disconnect power and water supply before beginning any repair.
• Replacement may require removing the cabinet or access panel; follow OEM service instructions.
• Support the tub while swapping springs to prevent sudden drops; use proper hand tools.
• Replace all affected suspension components for balanced support.

This internal drain hose routes defrost and condensate water from the evaporator to the refrigerator drain pan to prevent pooling and ice buildup. It's a direct-fit replacement designed for proper water flow inside the cabinet. What it does

• Channels defrost water away from the evaporator and freezer compartment to the drain pan
• Helps stop water pooling on shelves, in drawers, or on the freezer floor
• Reduces ice buildup caused by clogged or damaged drain tubing
• Restores normal drainage when original hose is cracked, pinched, or separated

• One internal drain hose

• Disconnect power to the appliance before starting any repair
• Remove food and any shelving that obstructs access to the evaporator area
• Ensure the drain path is clear and the hose is routed without sharp bends or kinks
• Use existing clamps or replace with an appropriate clamp; test by pouring a small amount of water into the evaporator area to ensure proper flow

This clamp secures the tub-to-internal drain hose connection to help prevent leaks and maintain proper drainage. A simple replacement when the original clip is corroded, broken, or no longer holds the hose tight. What it does

• Secures the drain hose to the tub/internal fitting to maintain a watertight connection
• Helps prevent water leaks and dripping from the hose junction
• Reduces risk of water pooling under the appliance or water damage during drain cycles
• Can resolve symptoms like intermittent leaking or a hose that slips off under pressure

• One tub-to-internal drain hose clamp

• Disconnect power to the appliance and turn off the water supply before beginning.
• Access the clamp via the washer's access panel or cabinet per your model's service instructions.
• Replace the clamp with the original orientation; use the appropriate pliers or clamp tool to secure without over-stressing the hose.
• Reassemble panels and run a short drain test to ensure there are no leaks.

This clamp secures the refrigerator's internal drain hose to the air chamber so defrost and condensation water drains properly, helping prevent leaks and water buildup inside or beneath the appliance. What it does

• Fastens the internal drain hose to the air chamber to keep the drain connection sealed
• Helps direct defrost and condensation water into the drain system, reducing pooling
• Can stop common symptoms like water under the fridge, dripping inside compartments, or ice buildup from poor drainage

• One hose-to-air chamber clamp

• Disconnect power before servicing to avoid shock or injury
• Access may require removing interior panels or the evaporator cover
• Use pliers or a screwdriver as appropriate to remove and reinstall the clamp; avoid overtightening to prevent hose damage
• Inspect the hose and fittings for cracks or blockages while replacing the clamp

This is a flexible pressure sensor hose designed to carry a small water/ or air-pressure signal between the appliance pressure sensor and the valve/manifold. It restores reliable pressure feedback for proper dispenser and ice system operation. What it does

• Transfers pressure/air signal from the valve/manifold to the pressure sensor so the control can detect proper water/ice fill.
• Helps prevent false pressure readings that can cause dispenser or ice maker fill problems.
• Commonly replaced when the hose is cracked, collapsed, or disconnected and causing inconsistent dispenser or ice performance.
• Fits in-line with the existing sensor and tubing—matches OEM shape and length for correct routing.

• Install only when the appliance is unplugged and water supply is shut off to avoid electrical shock or water leaks.
• Ensure both ends are seated fully and secured with the original clamps or retaining fittings to prevent air/water leaks.
• Inspect adjacent fittings and sensors for damage; replace any brittle or cracked parts to ensure a proper seal.

This external drain hose carries used water from the washer to your household drain. Replace a cracked, leaking, or kinked hose to restore proper draining performance and help prevent water spills during the drain cycle.

• Routes wastewater from the washer's drain outlet to a standpipe or sink
• Helps maintain a watertight path when correctly seated and secured
• Typical symptoms of a bad hose: leaks at the rear or floor, visible cracks/kinks, slow or incomplete draining

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Transfer any brackets or clamps from the old hose; push connections fully home and secure
• Route to the manufacturer-recommended standpipe height; avoid kinks and sharp bends
• Run a short fill/drain test and check all connections for leaks

This external drain hose base clip secures the dishwasher drain hose to the base, keeping the hose seated and reducing movement that can lead to leaks or poor draining. It's a small, inexpensive fix that helps maintain proper hose routing. What it does:

• Holds the drain hose in place at the base to prevent the hose from slipping or detaching
• Helps keep the hose routed to avoid kinks that can restrict drainage
• Reduces the chance of water dripping or pooling from a loose hose connection
• Commonly used when the hose clip is broken, missing, or no longer grips securely

• One external drain hose base clip

• Disconnect power to the appliance before starting work; follow all safety precautions
• Access the clip through the lower access panel or kickplate as required by your model
• Remove the old clip and press the replacement clip into position until it snaps securely around the hose
• Inspect the hose and adjacent fittings for damage and replace if necessary

The Drain Pump is an OEM part for GE washing machines. Located near the bottom of the washer tub, this electric pump is responsible for efficiently draining water from the tub at the end of each cycle. Proper drainage is crucial for preventing flooding or excess moisture from being trapped inside. 

Symptoms of a bad drain pump include:

• Washer fails to fully drain or drain takes an excessively long time
• Water remaining or pooling at the bottom of the tub after cycles  
• Strange sounds or vibrations were heard coming from the drain pump area
• Reduced washing performance due to inadequate drainage

Causes of failure are generally wear over time, blockages in the pump chamber, or electrical issues with the pump motor.

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This tub-to-pump hose clamp secures the washer drain hose connection between the tub and pump to help prevent leaks and ensure proper drainage. It's a direct-replacement fastening clip used where the tub hose meets the pump inlet. What it does:

• Holds the tub-to-pump drain hose firmly on the pump or tub fitting to stop leaks.
• Keeps the hose sealed under normal wash and drain cycles to maintain proper drainage.
• Commonly replaced when clamps are rusted, broken, or no longer hold tension, causing water to leak near the pump area.

• Disconnect power and water supply and drain the washer before starting work.
• Access may require removing the washer access panel or cabinet—follow manufacturer service instructions.
• Use appropriate pliers or a clamp tool; install so the clamp fully encircles the hose and fitting without pinching the hose.
• Check for leaks after reassembly and run a short drain cycle; replace the hose if it shows cracks or wear.

This pump water release hose routes water from the pump to the drain, helping remove excess water quickly and reliably. It replaces worn or damaged hoses to stop leaks and restore proper draining. What it does:

• Channels discharged water from the pump to the drain path
• Prevents pooling behind panels and under the unit when functioning correctly
• Commonly replaced when cracked, split, collapsed, or leaking
• Helps resolve symptoms like water leaks under the appliance or incomplete drainage

• Disconnect power and shut off water supply before servicing.
• Inspect hose routing and clamps; replace clamps if corroded or damaged.
• Ensure hose is free of kinks and properly seated on pump and drain fittings.
• Test for leaks after installation and before reassembling panels.

A small service plug that seals the washer drain/pump housing and gives a service access point to release trapped water during maintenance. Helps contain water when installed and provides a way to drain the pump without removing the entire assembly. What it does

• Seals the pump/drain housing to prevent leaks from the service access point.
• Provides an access port for releasing or draining residual water during repair or maintenance.
• Enables easier removal of trapped debris or small clogs near the pump inlet.
• Restores a watertight service opening when properly installed.

• Disconnect power and shut off water supply before servicing the appliance.
• Drain remaining water from the tub or pump area before removing the plug to avoid spills.
• Hand-start threading then tighten securely; do not overtighten to avoid damaging the housing.
• Inspect sealing surfaces and replace any worn gaskets or O-rings to ensure a watertight fit.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.