Parts for Ge GNW128SSM0WW: Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A small replacement housing screw that secures appliance panels and brackets, restoring proper fit and preventing rattles or loose panels. Fits common appliance housings where a short ST4 x 12 self-tapping screw is required. What it does:

• Fastens housing panels, trim, or internal brackets to maintain proper alignment and reduce vibration
• Replaces missing or damaged screws that cause loose or rattling panels
• Works with sheet metal and plastic mounting points designed for ST4 thread size
• Small, low-profile head designed for appliance interiors

• One housing screw (ST4 x 12)

• Disconnect power before servicing the appliance and work on cool surfaces
• Use the correct screwdriver or bit to avoid stripping the head
• Install gently and avoid overtightening to prevent thread or panel damage

This tapping screw is a self-tapping fastener used to secure panels and components on compatible appliances, restoring secure mounting and preventing loose or vibrating parts. It's a direct replacement for a single factory screw. What it does:

• Threads into sheet metal or plastic mounting points to hold panels, brackets, or small components
• Replaces missing or stripped screws that cause loose panels or rattling
• Helps restore proper alignment and secure connections for controls and covers
• Works where a self-tapping fastener is required instead of a machine screw

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid cam-out and head damage
• Start threading by hand to ensure proper engagement, then tighten until snug — do not over-torque
• Replace only with the exact part to ensure fit and proper fastening

A single self-tapping screw used to secure appliance panels and trim for a stable, vibration-free fit. Replaces a lost or damaged mounting screw to restore proper part attachment and reduce rattling. What it does:

• Fastens control panels, brackets, trim pieces or small assemblies to metal or plastic surfaces
• Creates its own threads for a tight hold in sheet metal or molded openings
• Helps eliminate loose parts that can cause noise, vibration, or misalignment
• Commonly used where original screws have stripped, corroded, or been lost

• One tapping screw (quantity: 1)

• Use the correct-size Phillips or Torx driver to avoid cam-out or head damage
• Start straight and apply steady pressure; do not overtighten to prevent stripping or cracking
• Disconnect power and remove any panels before working
• If threads are damaged, replace the mating fastener or insert before installing this screw

A small replacement felt pad that cushions the dryer drum and reduces noise and wear. Replaces a worn or torn felt that lets the drum rub against the bulkhead or glide surfaces. What it does:

• Cushions the drum to prevent metal-on-metal contact and reduce scraping noises
• Absorbs vibration to help cut down hums and rattles during operation
• Helps keep the drum aligned for smooth rotation
• Protects the drum edge and adjacent components from wear

• Turn off and unplug the appliance before starting any repair
• Remove the dryer front or drum per manufacturer instructions to access the felt pad
• Inspect surrounding felt seals and glides; replace any damaged parts for best results

This harness clip secures a wiring harness to the appliance chassis to keep wiring routed and protected from heat, moving parts, and abrasion. It helps reduce wire strain and prevents rubbing or chafing that can cause electrical issues. What it does:

• Holds the wiring harness in place to maintain safe routing and prevent contact with hot or moving components
• Helps stop harness vibration and rattle that can cause noise or loosen connections
• Reduces the chance of wire insulation wear from rubbing or chafing
• Supports consistent electrical connections by preventing undue strain on terminals

• One harness clip

• Disconnect power (unplug appliance or shut off breaker) before inspecting or replacing wiring clips
• Remove panels as needed to access the harness mounting location
• Press the clip into the mounting hole or snap the harness into the clip until secure; needle-nose pliers may help in tight spots
• Inspect surrounding wiring and connectors for damage when replacing the clip; replace any damaged wiring or connectors per OEM guidance

This genuine replacement hook secures and supports a door or panel to restore proper latching and alignment. It's a simple, direct swap that helps fix loose or misaligned doors and prevents unexpected opening. What it does

• Provides a secure anchor point for the door latch or strike to engage
• Restores correct door alignment and closing action when the original hook is damaged or bent
• Helps stop doors from slipping out of position or failing to latch
• Common symptom: door feels loose, won't stay closed, or is misaligned

• One replacement hook

• Disconnect power or shut off the appliance before inspecting or replacing parts
• Basic hand tools may be required to remove trim or access panels
• Handle edges and mounting tabs carefully to avoid damage or injury

This is a replacement cabinet handle that restores a secure grip and easy access to your appliance door or compartment. It fits where the original handle is cracked, loose, or missing and matches OEM mounting locations. What it does

• Provides a sturdy, ergonomic grip for opening and closing the cabinet or appliance door
• Replaces cracked, broken, or worn handles that make doors hard to open
• Restores original fit and alignment when the existing handle is loose or damaged
• Matches factory mounting points to simplify replacement

• Use basic hand tools; avoid overtightening fasteners which can crack plastic parts
• If replacing a handle on an electrical appliance door, disconnect power before working near controls
• Keep removed fasteners and any decorative trim to reuse if applicable

This motor start/run capacitor provides the brief electrical boost motors need to start and keep running smoothly, reducing hum and improving drivetrain performance. It's a direct replacement for the failed capacitor in compatible GE appliances. What it does:

• Supplies a short surge of power to help the motor start under load
• Stabilizes motor operation to reduce stalling, humming, or slow spin-up
• Helps maintain consistent motor speed during normal cycles
• Commonly replaced when motors fail to start or run intermittently

• One capacitor

• Disconnect power before inspecting or replacing the capacitor to avoid shock
• Discharge the capacitor before handling; stored charge can be hazardous
• Verify terminal markings and match wiring orientation during install

This outer harness protective cover is a replacement protective sleeve that protects the appliance wiring harness from abrasion, heat and wear to help maintain safe wire routing and reliable electrical connections. What it does:

• Shields the wiring harness from rubbing, chafing and minor heat exposure
• Helps prevent insulation damage that can lead to exposed wires or shorts
• Keeps harness routing neat to reduce strain on connectors
• Can reduce intermittent electrical faults caused by damaged or pinched wires

• Disconnect power to the appliance before starting any repair.
• Access the harness by removing the service panel or back cover as required by your model.
• Slide the cover over the harness or replace the damaged section; secure per OEM routing and clips.

This is a replacement drain pump assembly for your washer that removes water from the tub so cycles can finish properly. Restores normal draining to help prevent standing water and cycle failures. What it does:

• Pumps water from the washer tub into the drain during drain and spin cycles
• Helps prevent water from remaining in the drum at end of cycle
• Works with the washer's control system to start/stop draining as required
• Commonly replaced when you hear humming, clicking, or when the washer won't drain

• Disconnect power and shut off water supply before beginning service
• Access typically requires removing the washer's lower front or back panel; keep fasteners organized
• Inspect and clear or replace any clogged hoses or pump inlet screens while installing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This internal drain hose clamp secures the washer tub outlet hose to prevent leaks and keep the drain path stable during use. A simple replacement that helps restore proper drainage and reduces water leakage risk. What it does:

• Fastens the internal drain hose to the tub outlet to maintain a sealed connection
• Prevents hose separation that can cause water leaks or puddling under the washer
• Keeps the drain hose aligned to allow consistent water flow during drain cycles
• Useful when the original clamp is corroded, cracked, or no longer holds tension

• Intended for use inside the washer cabinet at the tub outlet; access may require removing panels
• Disconnect power and water supply before beginning any repairs
• Use pliers or the appropriate clamp tool to remove and install the clamp without damaging the hose
• Replace the hose before installing the new clamp if you see hose damage.

This internal tub-to-pump drain hose connects the washer's inner tub to the drain pump, routing wastewater from the drum so the appliance can pump it out reliably. Replaces a cracked, clogged, or leaking hose to restore normal draining. What it does:

• Transfers wash water from the inner tub to the drain pump during drain cycles
• Prevents leaks by providing a sealed, flexible connection between tub and pump
• Worn, split, or collapsed hoses can cause poor or no draining and water under the washer
• Flexible rubber design resists vibration and helps reduce noise during pump operation

• One internal tub-to-pump drain hose

• Disconnect power and shut off water supply before servicing the washer
• Remove the cabinet/panel to access the hose; note clamp locations
• Inspect and replace clamps if corroded; route hose without sharp bends or pinches
• After installation, run a short drain/spin cycle to check for leaks and correct routing

This clamp secures the internal drain hose to the pump inlet, helping stop leaks and keeping the drain connection tight. It's a direct-fit replacement used on compatible GE washers/dishwashers. What it does:

• Holds the internal drain hose firmly to the pump inlet to prevent water leaks
• Helps maintain proper drain flow by keeping the hose seated and sealed
• Can reduce vibration-related loosening of the hose connection
• Addresses common symptoms like water pooling under the appliance, leaks from the pump area, or intermittent draining issues

• One internal drain hose clamp for the pump inlet

• Disconnect power and water supply before attempting any service
• Access may require removing the appliance front or rear panel
• Verify hose position and seating before tightening the clamp; avoid over-tightening which can damage hose

This hose clamp secures an internal drain hose-to-hose connection to stop leaks and keep the washer's drain path sealed. It's a simple replacement that restores a tight hose joint inside the cabinet. What it does:

• Secures the connection between two internal drain hoses or an internal hose and adapter to prevent water bypass.
• Helps stop water leaks that can appear inside the washer or under the appliance near the drain area.
• Keeps the drain path sealed so the washer can pump water out properly.
• Fits where a small, factory-style clamp is required rather than a worm gear or zip tie.

• Disconnect power to the appliance before accessing internal components.
• Turn off the water supply and drain remaining water before removing hoses.
• Use suitable pliers or a screwdriver to remove the old clamp and seat the new clamp evenly; avoid over-tightening.

External drain hose clamp keeps the appliance's external drain hose firmly attached to the pump or drain outlet, preventing leaks and hose disconnection. Replacing a worn clamp restores a secure, leak-free hose connection. What it does:

• Secures the external drain hose to the pump or drain outlet to help prevent leaks and accidental disconnection.
• Helps maintain proper drainage; a loose or damaged clamp can allow water to leak during drain cycles or let the hose slip free.
• Common replacement when the clamp corrodes, breaks, or no longer tightens reliably.

• Disconnect power and turn off water before servicing to avoid electrical shock and water damage.
• Remove the old clamp, position the replacement over the hose connection, and tighten with the appropriate tool (pliers or screwdriver) until snug—do not overtighten.
• Restore water and power, run a short drain cycle, and inspect the connection for leaks. Replace the hose if damage is found.

This fixed foot is a replacement leveling/support leg that stabilizes and supports the appliance at floor level for safe, wobble-free operation. Easy to swap when a worn or broken foot causes instability or uneven sitting. What it does

• Provides a stable support point to keep the appliance level and prevent rocking or tipping.
• Restores correct appliance alignment to reduce door/lid rubbing and improve seal performance.
• Helps distribute weight to protect flooring and prevent concentrated pressure damage.
• Absorbs minor vibration for quieter operation when the appliance runs.

• Disconnect power and water and move the appliance per the manufacturer's service recommendations before working underneath.
• Replace with the matching foot and secure; avoid forcing threads or over-tightening.
• Check and adjust appliance level after installation using a carpenter's level; confirm stable, wobble-free contact at each support point.
• Wear safety gloves and eye protection.

This inlet fill hose delivers water from the household supply to the refrigerator's dispenser and ice system, restoring reliable water flow and ice production. Designed as the direct-replacement water connection hose. What it does

• Carries water from the household supply to the refrigerator water valve, dispenser and ice maker.
• Replaces cracked, split or collapsed hoses that cause reduced water flow or no ice production.
• Stops leaks and drips caused by damaged or brittle inlet tubing.
• Helps restore normal dispenser flow and consistent ice maker fills.

• Turn off house water supply and unplug the appliance before replacing the hose.
• Inspect fittings and replace any damaged clamps or gaskets; hand-tighten connections and check for leaks.
• Route the hose away from sharp edges and heat sources to prevent future damage.

This inlet fill hose is the water line assembly that delivers fill water from the inlet valve to the appliance—restores proper filling and prevents leaks when the original hose is damaged or worn. What it does:

• Routes water from the fill/inlet valve to the washer tub or dispenser
• Replaces cracked, split, or clogged inlet hose that can cause leaks
• Helps restore normal fill levels or intermittent filling failures
• Fits where the OEM inlet hose is specified for direct replacement

• One inlet fill hose assembly

• Turn off and disconnect power and shut off the water supply before starting
• Inspect fittings and seals; replace clamps or O-rings if worn
• Hand-start threads and tighten fittings; avoid overtightening plastic fittings
• Test for leaks by running a short fill cycle after installation

This drain hose assembly routes defrost and condensation water from the evaporator to the refrigerator drain pan, preventing pooled water and ice buildup. Replaces a damaged or clogged hose to restore proper drainage and reduce leaks. What it does:

• Channels defrost and condensate water away from the evaporator area to the drain pan
• Restores normal drainage when the original hose is cracked, split, clogged, or collapsed
• Helps stop water pooling inside the fresh food or freezer compartments
• Reduces risk of ice build-up or odor caused by trapped water

• One drain hose assembly as shown

• Disconnect power to the appliance before starting any repair
• Remove any shelving or panels needed to access the evaporator and drain routing
• Ensure hose is seated securely at both ends and routed without kinks or sharp bends
• After installation, run a short manual defrost or pour water down the drain to verify proper flow

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.