Parts for Ge GNW128SSM0WW: Controls & Lid Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This RJ45 port is the appliance Ethernet jack that provides a secure wired network connection to the appliance control electronics. Replacing a damaged jack restores a solid plug-and-play Ethernet connection for diagnostics or network features. What it does:

• Provides a standard RJ45 receptacle for connecting an Ethernet cable to the appliance control board
• Restores a stable wired network connection when the existing jack is cracked, loose, or has bent pins
• Enables communication between the appliance and a home network or service tools that require a wired link
• Helps prevent intermittent connectivity caused by poor physical contact or damaged terminals

• 1 RJ45 port (Ethernet jack) as shown

• Power off and unplug the appliance before starting work to avoid electrical shock
• Access the control area; this part typically mounts to the control board or chassis
• Inspect mating cable and wiring for damage; replace or repair wiring harnesses if needed

This dispenser box is the main plastic housing that holds and directs the refrigerator's dispense components so the dispenser operates cleanly and securely. Replacing a damaged box restores proper alignment and helps stop leaks or misfeeds. What it does

• Houses the dispenser controls, chute and internal trim so ice and water move through the dispenser correctly
• Protects internal dispenser components from debris and damage
• Restores proper alignment when cracked, warped or broken parts cause sticking or jamming
• Helps stop visible leaks or drips at the dispenser opening when the housing is compromised

• One dispenser box assembly

• Disconnect power and shut off the water supply before starting work
• Removal typically requires access behind the outer dispenser trim; handle the plastic housing gently to avoid cracking
• Keep fasteners and any trim pieces organized for reassembly; confirm proper seat and seal before restoring water

A small replacement housing screw that secures appliance panels and brackets, restoring proper fit and preventing rattles or loose panels. Fits common appliance housings where a short ST4 x 12 self-tapping screw is required. What it does:

• Fastens housing panels, trim, or internal brackets to maintain proper alignment and reduce vibration
• Replaces missing or damaged screws that cause loose or rattling panels
• Works with sheet metal and plastic mounting points designed for ST4 thread size
• Small, low-profile head designed for appliance interiors

• One housing screw (ST4 x 12)

• Disconnect power before servicing the appliance and work on cool surfaces
• Use the correct screwdriver or bit to avoid stripping the head
• Install gently and avoid overtightening to prevent thread or panel damage

This water inlet tube routes water from the refrigerator's inlet valve to the dispenser and ice system, restoring a clear path for water flow. Ideal when the original tube is cracked, kinked, or leaking. What it does:

• Directs water from the inlet valve to the internal dispenser/ice water lines
• Stops leaks and restores proper water routing when the tube is damaged or worn
• Helps eliminate reduced or intermittent water flow caused by cracks or blockages
• Works as a direct replacement for the factory inlet tubing design

• One water inlet tube

• Turn off water supply and unplug the appliance before starting
• Remove the access panel(s) as needed to reach the inlet valve and tubing
• Use proper fittings and inspect O-rings/seals; replace seals if worn or missing

This water inlet tube routes the hot water supply to the refrigerator's valve assembly, restoring proper water flow and enabling the dispenser/ice system to access hot water lines when applicable. Durable replacement for a damaged or leaking inlet line. What it does:

• Channels hot water from the household supply to the refrigerator's water valve and dispenser/ice system
• Replaces cracked, split, or corroded inlet tubing that can cause visible leaks
• Helps stop slow or intermittent water flow caused by a damaged inlet tube
• Works as part of the valve assembly plumbing to maintain safe, directed water flow

• One water inlet tube (hot)

• Turn off water supply and unplug the appliance before starting work
• Inspect fittings and O-rings; replace sealing components if damaged
• Use appropriate hand tools and avoid overtightening fittings to prevent leaks

This replacement water valve inlet tube clamp secures the refrigerator's water inlet tube to the valve to help prevent leaks and keep the line properly seated. Durable metal construction for reliable hold. What it does:

• Secures the water inlet tube to the valve so the tubing stays attached during normal use
• Helps prevent water leaks where the inlet tube meets the valve
• Keeps the tube aligned to ensure consistent water flow to the dispenser/ice maker
• Simple, low-profile clamp designed for a snug fit without crimping the tubing

• One water valve inlet tube clamp

• Turn off and disconnect power to the appliance before servicing
• Shut off the water supply and relieve any line pressure before removing the tube
• Use basic hand tools; do not overtighten the clamp to avoid damaging tubing
• After installation, restore water and power, then check connections for leaks

This water valve absorption gasket is a replacement seal that fits between the water valve and surrounding housing to maintain a watertight connection and prevent leaks. It restores a secure seal for proper valve operation and leak control. What it does:

• Creates a watertight seal at the water valve mounting interface to stop drips and seepage.
• Helps maintain correct valve alignment and prevents moisture from reaching nearby components.
• Addresses symptoms such as visible leaking at the valve, water on the cabinet floor, or moisture buildup near the valve area.
• Supports reliable water flow by preventing external leaks that can affect valve performance.

• One water valve absorption gasket

• Disconnect power and shut off water supply before servicing; relieve pressure in lines.
• Inspect mating surfaces and clean away debris or old gasket material before installing the new gasket.
• Replace only with the exact gasket specified for the valve to ensure a proper fit; hand-fit then tighten mounting fasteners to OEM guidance.

This inlet tube clamp secures the water inlet tube to the water valve, helping keep the tube seated and preventing leaks or disconnection. A small but essential part for reliable water flow into the appliance. What it does:

• Holds the inlet tube firmly to the water valve to prevent the tube from pulling off
• Helps maintain a watertight connection at the valve/tube junction
• Can stop intermittent leaks or water spray caused by a loose or shifted tube
• Keeps the inlet tube correctly positioned so water flows into the valve without obstruction

• One inlet tube clamp for the water valve

• Turn off water supply and unplug the appliance before servicing
• Use pliers or a suitable clamp tool to remove and install; ensure a snug fit without pinching the tube
• Inspect the inlet tube and valve for damage or wear while replacing the clamp

This wire tie secures wiring and small harnesses inside the appliance to prevent rubbing, snagging, or contact with moving parts. Durable and simple to use, it keeps internal wiring neat and reduces noise from loose wires. What it does:

• Fastens and groups wires or small hoses to reduce movement and chafing
• Helps prevent electrical shorts and wear caused by rubbing against panels or components
• Keeps wiring harnesses routed away from motors, belts, and heating elements
• Can reduce vibration noise from loose wiring

• Always disconnect power to the appliance before servicing electrical components
• Thread the tie through the bundle and pull snug; trim excess tail flush with a cutter
• Do not overtighten — secure wires without pinching insulation
• Replace any brittle or damaged ties; use only as directed for wire management

This user interface board is the control panel assembly that lets you enter settings and operate the oven. It restores responsive buttons and display control so you can set temperatures, timers, and modes reliably. What it does:

• Replaces a damaged or unresponsive control board that controls front-panel buttons and the electronic display
• Restores button/touchpad responsiveness and visible clock/timer readouts
• Can stop erratic behavior like unresponsive controls or incorrect oven mode selection
• Works with the oven's main control to send user commands for bake, broil, timer, and other functions

• One user interface/control panel board

• Disconnect power at the breaker or unplug the appliance before beginning—risk of shock
• Remove control panel or back panel per service manual to access the board; keep screws and trim organized
• Handle the board and display with care to avoid static or physical damage; avoid touching circuit traces

This electronic power control board is the PCB that manages power distribution and control signals for your appliance's main electrical systems, restoring reliable operation when the original board fails. Replace a damaged board to return control functions to normal. What it does:

• Regulates and distributes power to control circuits and relays
• Interfaces with user controls and sensors to execute commands
• Helps stop intermittent operation, no power to certain functions, or erratic behavior caused by a faulty board
• Works as the central electronic control for related appliance systems

• Disconnect power to the appliance before beginning any service to avoid shock hazard
• Handle the PCB by its edges and avoid touching components or connector pins
• Verify board part number and connector fit before installation

This metal main board shield protects the appliance's electronic control board from heat, dust and debris. It helps maintain reliable electronics operation by shielding the board and nearby components. What it does:

• Covers and shields the main control board from heat exposure and incidental contact
• Helps prevent dust and debris buildup on the board and connections
• Can reduce risk of physical damage from nearby moving parts or panels
• Commonly replaced if the shield is bent, corroded, cracked or missing

• Disconnect power to the appliance before starting work
• Remove outer panels or access covers to reach the control board area
• Handle the shield carefully — edges may be sharp; reuse original fasteners or replace as needed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This lid reed switch is the magnetic safety sensor that tells a top-load washer when the lid is closed so cycles can start or continue. Replaces a failed switch to restore normal lid-detection behavior. What it does:

• Detects lid-closed position and completes the safety circuit so the washer can start or spin
• Commonly used when the washer won't start, won't spin, or pauses mid-cycle because the machine thinks the lid is open
• Works as the low-voltage magnetic sensor used by the control to confirm lid status
• Passive electrical part; no programming required

• Disconnect power to the appliance before accessing internal components
• Replace the switch in the same orientation; avoid pulling on wiring or connectors
• Inspect wiring and connectors for damage and secure all fasteners before testing
• Test operation with the lid closed and open after reassembly

This water level sensor tube connects the washer tub to the pressure switch so the machine can detect and control fill level. It restores accurate water sensing for normal cycle operation. What it does:

• Transmits air pressure from the tub to the water-level/pressure switch so the machine senses fill height
• Helps prevent overfilling or incorrect fill by ensuring the pressure switch receives a clear signal
• Replaces cracked, pinched, or deteriorated tubes that cause erratic fill behavior or washer errors
• Works as the low-pressure air line in top-load washer water-level systems

• One water level sensor tube

• Disconnect power and turn off water supply before beginning any repair
• Remove and route the tube exactly as the original to avoid kinks or sharp bends that block airflow
• Push tube ends fully onto fittings until seated; secure any retaining clips or clamps if present

Replacement spring for the washer's out-of-balance switch lever. It restores proper lever tension so the switch can correctly sense unbalanced loads and manage the spin cycle, helping reduce vibration, noise, and nuisance stops. What it does:

• Maintains the return tension on the out-of-balance switch lever so the switch actuates reliably during spin
• Allows the control to pause or redistribute when a load is unbalanced, minimizing vibration and banging
• A weak, stretched, or missing spring can cause no-spin, repeated pauses, or cycles that end early with out-of-balance warnings
• Helps ensure accurate imbalance detection for consistent spin performance

• Includes 1 spring

• Unplug the washer before servicing
• Access the out-of-balance switch lever (location varies by model; often under the top or behind the front panel)
• Note the spring's routing and attachment points; install the new spring in the same orientation and avoid overstretching
• After reassembly, run a short spin test with a small load to confirm operation

The Out of Balance Switch Lever is an OEM part for GE washing machines. It is a safety component located inside the washer tub that detects vibrations and movements during spin cycles. When unbalanced loads are detected, the lever triggers the out of balance mechanism to stop the spin cycle for protection.

Causes typically relate to standard wear and tear over time spent monitoring spin cycles. Bends or cracks in the lever itself can render it non-functional.

Symptoms of a faulty lever can include:

• Inability to detect out of balance conditions
• Spin cycles not ceasing as intended with uneven loads
• Premature wear of other components from unbalanced vibrations

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
 

This out of balance switch monitors vibration in your washer and tells the control to pause or stop spin when a load is off-balance. Replacing a faulty switch helps reduce excessive shaking so cycles can finish reliably.

• Detects excessive tub movement during spin and signals the control to intervene
• Helps protect the cabinet and drive system by pausing or slowing spin during off-balance events
• A failed switch may cause: stopping mid-spin, won't complete cycle, repeated out-of-balance interruptions, beeping/flashing alerts, or constant rebalance attempts
• Restores proper out-of-balance monitoring so spin can complete safely

• Disconnect power before servicing; allow moving parts to stop
• Access the switch (typically mounted to the cabinet/frame near the tub on many top-load models) and note wire positions
• Transfer wires to the new switch one at a time; secure the switch with the original fasteners
• Run a spin test empty, then with a small load to operation

This lid switch is the safety interlock that detects when the washer lid is closed so the machine will start and run. Replacing a faulty switch restores normal start/spin behavior and helps keep the washer from running with the lid open. What it does:

• Prevents the washer from starting or spinning when the lid is open
• Signals the control to allow fill, agitate, spin, and drain cycles when closed
• Common symptom: washer won't start or will stop mid-cycle
• Common symptom: washer won't spin or shows intermittent operation
• Works with the washer's lid latch and wiring harness to complete the safety circuit

• Disconnect power before beginning any service to avoid shock or injury
• Access usually requires opening the washer cabinet or removing the top panel; refer to service instructions for your model
• Inspect the wiring harness and connectors for damage; replace if corroded or loose
• Test the switch for continuity with a multimeter after removing it to confirm failure before replacing

This rear top cover splash replaces the metal splash panel that mounts at the back of the cooktop to protect the wall and controls from spills and back splatter while restoring the appliance's finished appearance. What it does:

• Covers the rear edge of the cooktop to block grease, liquids, and food debris from reaching the wall and control area
• Restores a straight, secure rear trim if the original is bent, dented, or missing
• Helps maintain a clean cooking area and appliance appearance
• Visible damage, gaps, or a loose panel are common signs it needs replacement

• Disconnect power to the appliance before beginning work
• Removal/installation may require lifting or removing the cooktop and/or back panel and uses common hand tools (screwdriver/socket)
• Handle edges carefully—metal panels can be sharp
• Test fit and ensure fasteners are secure before returning the appliance to service

This light pipe transfers indicator or control board light to the exterior panel so status lights and icons are visible. It's the direct replacement part that restores a dim or missing control/display indicator. What it does:

• Guides LED or bulb light from the control board to the front panel or indicators
• Restores visibility when a control light appears dim, misaligned, or not visible
• Positions and protects the light source alignment for accurate indication
• Works with the existing lamp/LED and mounting points

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the light pipe gently; it's typically plastic and can crack if forced
• Remove the control panel or trim per your model's service instructions to access the part
• Reassemble carefully and test the indicator lights before finalizing the repair

This front control panel replaces the worn or damaged console that houses the user controls and display, restoring a clean, usable interface for your appliance. It provides the exterior housing and button area for the control electronics. What it does:

• Replaces the exterior console that supports push-buttons, touch pads, and the display window.
• Restores a secure, finished surface for user input and visual status indicators.
• Helps resolve issues with cracked, faded, or broken control surfaces and loose button housings.
• Does not include electronic control board, buttons, or harnesses unless listed separately.

• Remove power to the appliance before starting — unplug or switch off the breaker.
• Installation typically requires removing surrounding trim and disconnecting any attached harnesses or display modules; retain fasteners for reassembly.
• Handle carefully to avoid scratching the finish and to prevent damage to attached displays or ribbons.

This lid hinge clip secures the washer lid hinge to the cabinet so the lid opens and closes reliably. A small replacement part that restores proper lid alignment and keeps the hinge assembly held in place. What it does:

• Retains the lid hinge to the cabinet or hinge bracket so the lid stays attached and aligned
• Prevents the hinge from slipping or the lid from sagging or coming loose when opening/closing
• Helps eliminate catching, uneven lid movement, and related noise caused by a worn or broken clip
• Used as a direct replacement for the OEM hinge retainer on compatible top-load washer models

• One lid hinge clip (single)

• Disconnect power to the appliance before starting any work to avoid injury
• Access may require opening or removing the washer top and/or hinge cover—use common hand tools (screwdriver, pliers)
• Clip typically snaps or slides into place; keep original fasteners and re-use if undamaged

A single self-tapping screw used to secure appliance panels and trim for a stable, vibration-free fit. Replaces a lost or damaged mounting screw to restore proper part attachment and reduce rattling. What it does:

• Fastens control panels, brackets, trim pieces or small assemblies to metal or plastic surfaces
• Creates its own threads for a tight hold in sheet metal or molded openings
• Helps eliminate loose parts that can cause noise, vibration, or misalignment
• Commonly used where original screws have stripped, corroded, or been lost

• One tapping screw (quantity: 1)

• Use the correct-size Phillips or Torx driver to avoid cam-out or head damage
• Start straight and apply steady pressure; do not overtighten to prevent stripping or cracking
• Disconnect power and remove any panels before working
• If threads are damaged, replace the mating fastener or insert before installing this screw

This harness connector holder is a small plastic retainer that secures a wiring harness and connector to the appliance chassis, helping prevent wire strain and chafing for safer, more reliable operation. What it does:

• Holds wiring harness and connector in place to prevent movement and rubbing against sharp edges
• Reduces risk of loose connections that can cause intermittent electrical issues
• Keeps wiring routed neatly for easier service access and inspection
• Helps maintain proper clearances from heat-producing components

• One harness connector holder

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Replace only the damaged or missing clip; push the harness into the retainer until it snaps or seats securely
• Use a flat tool to remove old clipped retainers carefully to avoid wire damage; verify connector seating after install
• Photograph wiring before removal to ensure correct reassembly

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.